china custom die casting stainless steel pipe fittings/pipe fitting ASTM A815 S32750 reducer

3A sanitary stainless steel 90 degree welded short elbow has strong corrosion resistance and long service life. The fitting is easy to install and features problem-free welding and assembly with the highest possible strength.

Monel 400 is widely used in Feed water and steam generator tubing.

Our company produces nickel alloy forged elbows under the guidance of experienced and skilled experts. They have accumulated a wealth of years of experience and industry knowledge to help us meet production challenges and achieve continuous production of our products, even in batches. For the production of nickel alloy forged elbows, we use nickel alloys as raw materials.

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).

Duplex steels are stainless steels, also known as duplex steels due to the presence of two phases in their metallurgical structure. This duplex steel is designed to provide better corrosion resistance and higher strength than other aesthetic stainless steels.

UNS S31803 pipe fittings is a duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades.

Strengthening of super alloy Hastelloy B2 pipe bend is performed by solid-solution hardening, work hardening, and precipitation hardening methods.

A sanitary elbow is a kind of sanitary fitting installed between two lengths of pipe or tubing to allow a change of direction. While these corner fittings are usually a 90¡ã or 45¡ã angle, 22.5¡ã elbows are also available.

Stainless steel as a material is used in the production of a wide range of products from pipes to bars and elbows once such product is the Stainless Steel Buttweld Elbow. It consists of a long radius elbow, concentric reducer, and eccentric reducer. They are an important part of the industrial piping system which helps in changing the direction of the pipes.

Alloy X pipe bend is known for its excellent high temperature strength withstanding up to 2200¡ãF. The alloy can also be easily fabricated with forming and welding characteristics by both manual and automatic methods.

We manufacture Alloy 825 tubing for use in pollution control tools, oil piping and gas equipment. In addition, they are used in the power generation, petrochemical and pharmaceutical industries.

Alloy 800 has higher mechanical properties at room temperature and during short-time exposure to elevated temperatures, whereas alloys 800H and 800HT have superior creep and rupture strength during extended high-temperature exposure.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

INCOLOY Alloy 800 (UNS N08800/W. Nr. 1.4876) is a widely used material for the manufacture of equipment requiring corrosion resistance, heat resistance, strength and stability, operating temperatures up to 1500¡ãF (816¡ãC) ).

S31803 is resistant to stress chloride corrosion cracking, and duplex stainless steel exhibits the best corrosion performance in high temperature and sulfide environments.

Alloy X pipe bend offers exceptional performance in furnace rolls or other industrial furnace applications because of the alloy’s strong resistance to oxidizing, reducing and neutral atmospheres.

Austenitic stainless steel 304 L is favored by most buyers for its excellent weldability and is a low carbon version of the very popular alloy 304. Stainless steel 304L pipe fittings tend to be resistant to intergranular corrosion since the reduction in carbon means the alloy is not sensitized by grain boundary precipitates.

Super Duplex S32950 Fittings are hardened on a variety of parameters such as strength, temperature, pressure resistance and durability before supplied to the customers. These UNS S32950 Super Duplex Pipe Fittings are being offered in an inclusive range such as S32950 Elbow, S32950 Bends, S32950 Equal & Unequal (reducing) Tees, S32950 Equal & Unequal (reducing) Cross, S32950 Concentric & Eccentric Reducer, S32950 End Pipe Cap, S32950 Long & Short Stub-ends, etc.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Hastelloy offer very good resistance to strong reducing and moderately oxidizing corrosive acids, as well excellent stress corrosion cracking resistance and resistance to localized attack.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.

Monel 400? can be used in temperatures up to 1000 oF. Monel K-500 is basically a better version of 400 and has higher strength and hardness.

Carbon Steel Pipe Fittings are made up of carbon steel which has a limited range of ingredients in its composition. Carbon steels have high hardness and wear and tear properties.

This durability is an extension of their chemical composition and the biphasic they exhibit. Duplex alloys are neither fully austenitic nor fully ferritic. As a result, the duplex nature of duplex steel butt welded fittings makes them one of the toughest alloys around.

Inconel 625 also commonly goes by the names: Haynes 625, Altemp 625, Nickelvac 625, and Nicrofer 6020.

The ASTM A234 WP5 specification consists of wrought carbon steel and alloy steel in seamless and welded form. The ASTM A234 WP5 Pipe Fittings are widely used in pressure vessel fabrication. These fittings have application under moderate to high temperatures and can also be effectively used in pressure piping systems.

ASME B366 Incoloy 800 Elbow resists water corrosion at moderate temperatures.

We are a well-known distributor and manufacturer of 317L Stainless Steel Disc Cover Fittings, widely known for their corrosion resistance properties. It is often considered for its compact size, high energy, durability, etc. Commonly used in chemical, cement, paper, oil and gas, petrochemical and other industries. They are made from high quality raw cloth and are noted for their close tolerances and dimensional accuracy.

The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media.