china factory stainless steel pipe fitting / elbow / reducer / tee / bend ASTM A403 WP316L 180deg elbow

They can also be seamless in nature. The nominal diameter of the seamless fittings ranges from ? inches to 24 inches and the welded fittings range from ? inches to 120 inches in diameter.

These stainless steel 310S butt welded pipe fittings are used in a variety of applications such as oven fixtures, furnace parts, heat treating chambers, hydrogenation parts, jetting parts, and more. These SS 310S butt weld fittings are also primarily used in the chemical, construction and plumbing industries.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Incoloy 800H is a high carbon grade of these 800 alloys. These alloys exhibit excellent resistance to post-weld carburization and graining. They remain ductile for extended periods of time at temperatures below 700 degrees Celsius.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

C-276 alloy is normally solution heat-treated at 2050¡ãF (1121¡ãC) and rapid quenched. If possible, parts which have been hot-formed should be solution heat-treated prior to final fabrication or installation.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

This nickel-copper alloy is precipitation hardenable due to the addition of aluminum and titanium. It combines the corrosion resistance of Monel 400 with the added benefits of superior strength and hardness (derived from its age-hardenability). Monel K-500 is also known for its ease of fabrication compared to other superalloys, and the fact that it is essentially nonmagnetic even at low temperatures.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

Fully austenitic welds are more prone to cracking during welding. For this reason, Type 316 and Type 316L “matching” filler metals are formulated to cure with a small amount of ferrite in the microstructure to minimize cracking susceptibility.

They can be annealed and hardened through a cold working process. They can withstand service containing nitric and phosphoric acids and the resulting oxidation. We provide third-party inspection services to large companies. We also offer a variety of Stainless Steel ASTM A403 WP316L Fittings such as SS WP316L Tee, WP316L SS End Cap, SS 316L Reducer, SS 316L Cross, SS 316L Elbow, SS 316L Stub End, etc.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A pipe cap, also known as a head, a plug, and a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug. Stainless steel caps are made of stainless steel. HT PIPE is a high quality stainless steel pipe cap supplier, manufacturer, exporter, wholesaler, factory and company in China, mainly exporting high quality 304/316 stainless steel threaded pipe caps.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monel K500 pipe bend and elbow have corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidising mineral acids, salts and alkalis.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

ASTM A860 WPHY 52 Fittings is a Wrought high Yield strength fittings as its feature and grade itself suggest about its high yield strength of the fittings. ASTM A860 MSS SP 75 WPHY 52 Fittings are generally used at High Pressure requirements.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The carbon steel seamless pipe fittings, buttwelded fitting and fabricated ones are available in the market.

MONEL K500 is a age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.

Among many applications, products include instrumentation components for the mechanical, chemical, petroleum, watchmaking, food and beverage, and medical industries.

316L can be used in large diameter annealed condition or small cross section cold worked condition.

Generally, the corrosion resistance of Monel K500 in solid solution is basically the same as that of Monel 400 alloy, so the corrosion resistance data of Monel 400 can be applied to Monel K500 alloy. Due to its low corrosion rate and high strength in flowing seawater, the alloy is particularly suitable for manufacturing seawater corrosion-resistant centrifugal pump shafts.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Inconel 625 elbow is made of high-performance nickel-chromium-molybdenum alloy known for its high level of strength, temperature resistance, and corrosion resistance.

Stainless steel tee is also a kind of pipe fittings, generally there are two kinds. That is, an equal tee, the diameter of the three ends is the same; a reducing tee, the diameter of the branch pipe is different from the other two.

We are a manufacturer of stainless steel 304 butt welded pipe fittings, offering a variety of constructions, styles, details, evaluations and sizes, each fitting to meet industry needs. The stiffness of 75 ksi ensures unparalleled finesse, with a high enough stack load limit to work at a stable weight.

The LTCS A420 WPL6 Weld Fittings are greatly resistant against the sea water and marine environments with 1/8 inches to 48 inches nominal bore sizes.