china supplier pipe fitting of high quality ASTM A403 WP347 cross

Carbon steel is a base steel composed of carbon and iron. It may contain other substances in unmeasured quantities or in trace amounts. Carbon steel is classified according to the carbon content mixed with iron. Medium and low carbon steels may have a carbon content of less than 0.3%, while high carbon steels may have carbon content as high as 2%. The percentage difference in content is usually chosen based on solderability. Carbon is known for its ability to withstand high temperatures and strength/stress.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material. All ASTM A234 Elbow & Elbow A234 Wpc are manufactured from plate, pressed in two halves with two weld seams.

Duplex UNS S32205 alloy is equally ferritic and austenitic in nature, and hence a widely used grade of Stainless Steel. UNS S32205 consist of 22% Cr and 3% Mo, 5 to 6% Ni alloyed stainless steel.

Duplex S31803 Disc Lid Fittings are almost never used above 300 degrees Celsius. Duplex steel S31803 bent butt welded pipe fittings generally perform well in environments that cause premature failure of austenitic grades. Although duplex steel S31803 short end butt welded pipe fittings have good high temperature oxidation resistance, this grade – like other duplex stainless steels – can embrittle even for short periods of time if held at temperatures above 300 degrees Celsius. If embrittled, duplex S31803 end caps can only be corrected by full solution annealing. Duplex S31803 Disc Lid Fittings are almost never used above 300 degrees Celsius.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Inconel 625 pipe fittings are available in ATSM B366 and ASME SB366 specifications. The tensile strength of Din 2.4856 Welded Buttweld Fittings is 1,35,000 psi 930 MPsand yield strength is 75,000 psi 517 MPa. UNS N06625 Cross are manufactured using push, cast, press, and forge processes. These fittings are available in the price range of Rs. 12,700 to Rs 2 lakh. We are among the leading manufacturers of alloy 625 reducer fittings and provide you the best quality product at an affordable price. Customer satisfaction is our ultimate goal. We assist in choosing the fittings as per the customers’ needs and specifications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

SS 316L, the low carbon version of SS 316 and is immune from sensitisation (grain boundary carbide precipitation).

The stability of niobium allows pipe fittings to be used in corrosive environments in the as-welded state. It also hardens best with the help of using working temperature. It also offers significant corrosion resistance with extremely clean fabrication and increased mechanical housing. Stainless steel UNS S31600 fittings meet or exceed unique corporate requirements, including ISO, DIN, ASTM and ASME requirements.

Incoloy 800H and 800HT are typically used in parts above 1100¡ãF where creep and fracture resistance is required. The chemical balance allows nickel steel alloys to exhibit excellent resistance to carburizing, oxidizing and nitriding atmospheres. Incoloy 800HT will not become brittle even after prolonged use in the 1200-1600¡ã F range where many stainless steels become brittle. 800HT exhibits the excellent cold forming qualities normally associated with Nichrome.

ASTM A420 WPL6 Pipe Fittings such as WPL6 Caps, A420 WPL6 Weld Fittings, and SA 420 WPL6 Elbow. Our stock of low temperature steel fittings includes A420 Grade WPL6 fittings in a complete range of sizes and thicknesses.

Duplex steel S32205 tee butt welded pipe fittings are often used in chemical process industries: such as sulfuric acid production, nitric acid process, phosphoric acid process, ethylene oxide, polypropylene production, PVC, equipment for handling organic and fatty acids, chemical storage and tankers, thermal switch, etc.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

High creep strength is attained through control over crystal grains¡ªvia high temperature heat treatment, together with fine control over carbon, titanium, and aluminum content.

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).

Upon exposure to oxidising agents, Inconel 625 is protected naturally by its nickel-chromium matrix.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Butt weld fittings connect with pipe to deliver air, water, natural gas, and oil in plumbing applications and food and dairy processing. Butt weld (BW) fittings form pipe joints with strength, fatigue, corrosion resistance, and temperature compliance.

We are your specialist for stainless steel butt weld fittings. We have a large stock of stainless steel elbows, caps, tees, reducers, crosses, stubs and many other stainless steel butt weld fittings including A185tee to meet your specifications and standards. We offer a wide variety of stainless steel, carbon, aluminum and nickel alloy butt weld fittings to meet your project needs.

ASTM A403 WP 310 Butt Weld Elbow is a pipe fitting commonly used to turn pipes in different directions at either a 45 degree or 90 degree angle. There are also different sized elbows. They are short radius elbows or long radius elbows. Grade 310 steel has a minimum yield strength of 205MPa and a minimum tensile strength of 515MPa. Due to the high melting point, 310 stainless steel butt welded pipe fittings can also work at high temperatures. The 310 material has a melting point of 1402 degrees Celsius. This allows fittings for high pressure and high temperature services such as heat exchangers and boiler components.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

This nickel alloy resists the formation of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition.

ASTM A234 WP91 is low content alloy steel,so its hardness is higher than carbon steel,so its have better performance for the abrasive resistance and corrosion resistence.So the ASTM A234 WP91 pipe fitting is more widely used for the machine parts compared with carbon steel.

Corrosion resistance of duplex steel radius fittings provided. Comparable to standard austenitic grades or high alloyed ferrites. Although duplex steels have good high temperature oxidation resistance like other duplex stainless steels, embrittlement can occur even at temperatures above 300 degrees Celsius for short periods of time. In case of embrittlement, duplex steel stub joints can only be corrected by a complete solution annealing treatment.

A pipe cap, also known as a head, a plug, and a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug. Stainless steel caps are made of stainless steel. HT PIPE is a high quality stainless steel pipe cap supplier, manufacturer, exporter, wholesaler, factory and company in China, mainly exporting high quality 304/316 stainless steel threaded pipe caps.

The addition of copper and molybdenum to DIN 1.4301 fittings produces pitting and crevice corrosion, as well as resistance to adverse environments. It seems to fall into the Flawless and Nickel categories as it has its own characteristics. It is an austenitic metal used for sulfuric acid packaging. It has excellent corrosion resistance to sulfuric acid.

Duplex stainless steels are Fe-Ni-Cr alloys consisting of ferritic-austenitic microstructure at room temperature. These steels generally possess beneficial combinations of the austenitic and ferritic phases. Duplex stainless steels exhibit greater toughness and better weldability than ferritic stainless steel (Nilsson, 1992). They have higher strength and better corrosion resistance than austenitic stainless steel (Atamert and King, 1992). Their good engineering performance has led to an increasing number of applications, mainly in corrosive environments such as sour gas pipelines and chemical reaction vessels.
Duplex stainless steels combine characteristics of the austenitic and ferritic family of alloys to offer benefits from both with fewer downsides — often at a lower cost than other steel alloys.
Duplex stainless steels have a combination of two phases, ferrite and austenite in approximately equal measure. This allows them to benefit from the advantages of both austenitic and ferritic stainless steels, leading to increased strength, improved weldability, higher toughness and resistance to several types of corrosion.