china supplier stainless steel tee of high quality

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

ASTM 182 is used for pressure systems, including fittings, flanges,and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

Grade F22 is a low alloy steel containing nominally 2.25% Chromium. The alloy is widely used in the oil patch wellhead applications for connectors, hangers and block valves. Hardness levels up to 22 HRC are approved to NACE MR0175. The grade is often used as the base metal for clad components.
If supplied to ASTM A182 in the normalised and tempered condition, the 0.2% Proof Stress minimum is 30 KSI.Grade 22 of the ASTM A182 alloy steel is a low-alloy steel that contains 2.25% chromium. Often used as base metal for clad components, the F22 is also used in the oil patch wellhead applications for products such as hangers, connectors, and block valves, among others.

Nickel fittings are manufactured through a hot or cold forming process, which means it can be bent and formed into the correct shape.

Nickel alloy pipe fittings are composed of alloys with nickel as the main element. There is complete solid solubility between nickel and copper. Its wide resolution range between iron, chromium and nickel enables many alloy combinations.

Alloy 600’s high chromium content makes it significantly more resistant to oxidation than pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy has a high level of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.

Due to its high strength and stiffness properties, Inconel 800 is an alloy that is ideal for demanding applications including the marine engineering, aerospace, and chemical processing industries.

Fittings are used to connect two or more lengths of pipe or to close pipe ends. Fittings can connect pipes in a straight line, change flow direction, increase or decrease flow, or close pipe ends to stop flow.

The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. IN625 has good corrosion resistance in various corrosive environments.

Our pipe elbows are widely used in many industries, such as power generation, petroleum, natural gas, chemicals, shipbuilding, heating, papermaking, metallurgy and so on.

INCOLOY alloy 800 is used in a variety of applications involving exposure to corrosive environments and high temperatures.

A pipe cap, also known as a head, a plug, or a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug.

ASME B16.9 is a widely recognized standard in the industry for fittings, flanges, and valves used in pipelines. The specifications of this standard cover dimensions, tolerances, materials, and markings for varying types of products. One commonly used product is the elbow, and the A234 WPB Long Radius Carbon Steel Elbow is a popular choice.

We offer sockets, steel sockets, stainless steel sockets, nickel alloy sockets, copper alloy sockets, duplex steel, carbon steel sockets and alloy steel sockets.

Carbon Steel A105 Grade all products like flanges, butt weld fittings, forged fittings, outlets, round bar that is Fabricated From High Quality Raw Materials. Carbon Steel A105 products are available in Following Specification, Grade and Sizes.

At HT PIPE. we invest in premium resources and dependable technology and machinery. NISPL has given an impetus to several industries during the last three decades, through its outstanding products and extraordinary services.

ASTM A182 F91 is an American standard Martensite type heat-resistant steel forgings, according to ASTM A182-2016.

Per specifications like the ASTM A105, using methods such as subjecting the material to normalizing, annealing, tempering, or quenching can bring about a noticeable change in the mechanical properties of the ASTM A105 Reducer.

Hastelloy C276 bushings have excellent resistance to strong oxidizing salt solutions such as ferric chloride and cupric chloride. Alloy C-276 has excellent phosphoric acid resistance at all temperatures below boiling point and concentrations below 65%.

INCONEL nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance.

A105 shall be subjected to heat treatment (annealing, normalizing, tempering, or quenching). A105 shall conform to carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium contents.

Nickel is a costly commodity, which is why its use in an alloy elevates its cost.

Hastelloy C276 has a low carbon content to minimize grain boundary carbide precipitation during welding to maintain corrosion resistance in the heat affected zone of the welded joint

We have a comprehensive inventory of nickel alloy forged fittings, socket weld and threaded fittings in all types, sizes, schedules and pressures. HT PIPE specializes in the manufacture of nickel alloy forged fittings that are in high demand in many applications in the naval, chemical processing, marine, petrochemical and refining, and oil and gas markets.

Nickel alloy is a component that contains nickel as a principal element and in higher concentration. It is a solid material that offers wide solubility with iron, chromium, and copper as well. The alloy is present in combined form as well. Nickel alloy is highly versatile and able to sustain heat and corrosion resistance.

Carbon steel material is used for forging. This material can be in shape of a bar or in shape of the ingot to meet various forging requirement. They offer maximum machinability and weldability.

Inconel 600 is non-magnetic, has excellent mechanical properties, combines high strength with good workability, and is easy to weld. Alloy 600 exhibits cold forming properties typically associated with chromium-nickel stainless steels.

Threadolet is a type of self-reinforced branch fitting developed by a Company called Bonney Forge. It is used whenever threaded branch connections are required from the pipe header. Mostly, it is used for small size piping with a low-pressure application.

It is virtually immune to chloride ion stress corrosion cracking. Sufficient resistance to organic acids such as acetic acid, formic acid and stearic acid.

The Inconel 625 is highly resistant against corrosion and oxidations mediums in various environments.

These are available in different types and grades such as Monel 400 Forged Threaded Elbow, Nickel 200 Forged Threaded Equal and Unequal Tee, Inconel 600 Threaded Equal and Unequal Cross, Incolloy 800 Threaded Half and Full Threaded Fittings, UNS S4400 Threaded Reducers, UNS S2201 threaded caps, Hastelloy C276 threaded reducing inserts, etc.