Copper nickel c71500 round bar

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Hastelloy UNS N10276 cold drawn bar has excellent resistance in a variety of chemical process environments. For example, Hastelloy C276 UNS N10276 square bar is resistant to corrosion in a variety of media, including strong oxidants (such as ferric chloride and cupric chloride), hot fouling media (may be organic or inorganic), chlorine, acetic anhydride , formic acid and acetic acid, as well as good tolerance to seawater and saline solutions.

The Ni-Cr-Mo superalloy Hastelloy C276 has excellent resistance in strong acid and alkali media and prevents pitting, crevice corrosion and SCC. Hastelloy C276 also has broad resistance to wet chloride gas, hypochlorite and chlorine dioxide media.

Inconel 600 Bar has good ductility and can be shaped using conventional methods with the help of powerful equipment.

The basic composition of Hastelloy C276 round bar alloy is chemically composed of three elements, which are nickel, molybdenum and chromium.

Typical applications for Monel K500 grade rods include those tasks that take advantage of the alloy’s high tensile strength and corrosion resistance. For example, Monel B865 K500 forged bar can be used to make impellers, propeller shafts, pump shafts.

The Nickel Alloy 601 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Alloy 31 Grade Polished Bars, etc. These Alloy 31 rods and bars are widely used in engineering industry, oil and gas industry, cement industry, chemical industry and sugar industry, these alloy 31 round bars and bars are very strong and have easy processing characteristics.

One of the benefits of using 2.4858 Incoloy 825 round bar is its high corrosion resistance. Incoloy 825 has a high content of nickel and a very stable austenitic structure. This high nickel content in Incoloy 825 alloy bars provides good resistance to chloride ion stress corrosion cracking.

Incoloy 800 round bars contain up to 35% nickel, up to 23% chromium and up to 39.5% iron. Incoloy 800 alloy round bars also contain carbon, molybdenum and silicon content. Incoloy 800 threaded rods can be used effectively at temperatures up to 600 degrees Celsius.

The outstanding characteristic of Inconel 600 is its resistance to high-temperature oxidation.

Compared to Alloy 718, Alloy 625 has higher corrosion resistance in high temperature environments.

Incoloy 825 is stable annealed at 940°C. The softest structure was obtained at 980°C. Sections heavier than sheet, strip and wire should be quenched to avoid sensitivity.

The versatility of ASTM B166 600 Inconel Rod has led to the alloy being used in a variety of applications, especially those involving a temperature range from cryogenic to above 2000¡ãF.

The inconel 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Wear-resistant steels such as EN31 tend to have higher strength properties, which make them durable in a wide range of applications. Although the strength of this material is high, it can be increased by tempering the alloy steel EN31 equivalent. In addition to improving their wear resistance, many brittle alloys are tempered for tougher parts. Between 150 – 300¡ãC (i.e. the EN31 tempering temperature), the alloy is heat treated, then impregnated and the material is then quenched. Unlike some alloys that may be quenched in water, EN31 round bar quenching requires the use of oil.

Some applications suitable for Inconel 625 include seawater, aerospace and chemical processing. About Seawater Inconel 625 is a common choice due to its excellent corrosion resistance, fatigue strength and high tensile strength. Not to mention its strong resistance to chloride ion stress corrosion cracking. Propeller blades, subsea motors, and subsea cable sheathing are good applications for Inconel 625, where the bar becomes wire once it passes through a certain minimum diameter, in which case the wire can be used for mooring cables.

Hastelloy G30 Hastelloy alloy is widely used in phosphoric acid equipment, sulfuric acid equipment, nitric acid equipment, nuclear fuel reprocessing

Inconel 601 is an alloy composed of nickel and chromium.

High nickel content ensures resistance to stress corrosion cracking, combined with molybdenum and copper provides strong resistance to reducing environments such as sulfuric and phosphoric acid, chromium to resist oxidizing environments such as nitric acid, titanium to inhibit intergranular corrosion, and overall resistance to pitting and crevice corrosion.

Inconel 718 is a precipitation hardening nickel-chromium alloy containing large amounts of iron, niobium and molybdenum, and small amounts of aluminum and titanium. 718 material maintains high strength and good ductility at temperatures up to 1300¡ãF (704¡ãC). Compared with other precipitation hardening nickel alloys, this alloy has relatively good weldability, formability and excellent low temperature properties. The alloy’s slow precipitation hardening reaction makes it easy to weld without hardening or cracking. Inconel? Alloy 718 is non-magnetic. It maintains good corrosion and oxidation resistance for applications requiring high creep and stress-rupture resistance at temperatures up to 1300¡ãF (704¡ãC) and oxidation resistance up to 1800¡ãF (982¡ãC) parts.

Alloy 600 (UNS N06600) is a nickel-based alloy with excellent carburization and good oxidation resistance at elevated temperatures. This alloy has long been used in the heat treatment industry for the same applications as RA330. Alloy 600 has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Due to the elevated nickel content, alloy 600 is not recommended for use in red hot conditions when sulfur is present.

Inconel 800 round bar is an iron, nickel and chromium based alloy. This Inconel 800H hot-worked round bar is known for its moderate tensile strength, good oxidation and carburization resistance, and performance at elevated temperatures.

Incoloy 825 round bar is similar to Alloy 800 bar, but has better resistance to water corrosion. Incoloy 825 round bar has some resistance to oxidizing and reducing acids, stress corrosion cracking, and restricted corrosion such as crevice and pitting corrosion. Alloy 825 is particularly resistant to phosphoric and sulfuric acids.

Hastelloy C-276 has excellent resistance to pitting as well.C276 alloy is suitable for many chemical process applications.

Unlike austenitic stainless steels, Inconel 625 round bars offer the advantage that they are less susceptible to chloride-induced stress-related corrosion cracking.

Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

Inconel 625 is useful in aerospace and areas where environmental constraints such as atmosphere, temperature, and pressure all play an important role in the material. Alloy 625 has remarkably high tensile strength, creep strength and rupture strength, in addition, it has excellent thermal fatigue and oxidation resistance and weldability, making it suitable for aerospace.

Hastelloy C22 bar contains a high amount of nickel-molybdenum-chromium superalloy as well as tungsten and is designed to provide excellent corrosion resistance in a wide range of harsh environments. It is very resistant to corrosion in immersion environments and is used for chemical applications in the as-welded state.

Available in a variety of sizes and dimensions, Uns N08800 steel is a common fixture in brackets, ladder hangers, heaters, overhead doors and more.

Hastelloy G30 Hastelloy alloys exhibit better resistance to commercial phosphoric acid than other nickel or iron based alloys. Its application as an acid evaporator in the fertilizer industry is increasing day by day.