Customized 1.4410 UNS S32750 Duplex2507 nut

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

We are manufacturers of ASTM A182 Duplex UNS S32750 / S32760 Flanges show enhanced pitting corrosion resistance in saline environments, brackish waters, bleaching operations, and selected food processing applications.

The Duplex Steel Pipe gets its name from the dual nature present in the microstructure of the alloy. Duplex Stainless Steel Seamless Pipe have good mechanical characteristics and can be used in an as welded condition. Considered to be superior in comparison to austenitic alloys ASTM A312 TP304 or ASTM A312 TP316, the Seamless Duplex Pipe offers much better resistance to corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex Steel UNS S31803 Seamless Pipes are widely used in various applications in the industry. These ASTM A790 Duplex Steel S31803 Pipes are made up of a combination of microstructure of austenitic and ferritic grains, which gives them unique properties. These properties include a high resistance to corrosion, excellent strength and toughness, and good weldability.

2205 dual-phase steel fasteners have some excellenut mechanical properties, which may be due to the balanced austenitic and ferritic microstructures in the alloy.

S31803 has been supplemented by S32205 (F60) which has a higher minimum Ni Cr and Mo.

Duplex 2205 fasteners are made from cost-effective, long-lasting and corrosion-resistant steel. The grade of steel used to make fasteners can be ferritic, austenitic or dual phase steel. Duplex materials have the strength qualities of ferritic steels and the corrosion-resistant qualities of austenitic steels.

Duplex stainless steel fasteners are available in Super Duplex, Lean Duplex and Standard Duplex grades, each with specific properties for differenut applications.

Duplex Steel Pipe is a metal alloy pipes that is made out of steel with different alloying elements. The name comes from the dual nature of the material.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A240 is a normative standard covering several chromium-based stainless steel grades manufactured in sheet, sheet, or ASTM A240 Gr 2205 strip.

S31803 has been supplemented by S32205 which has a higher minimum N, CR and Mo.

Combining many of the beneficial properties of ferritic and austenitic steels, 2205 is the most widely used duplex grade. Its high chromium and molybdenum conutenut gives stainless steel excellenut corrosion resistance.

Alloy 2205 provides pitting and crevice corrosion resistance superior to 316L or 317L austenitic stainless steel tube in almost all corrosive media. It also has high corrosion and erosion fatigue properties as well as lower thermal expansion and higher thermal conductivity than austenitic.

ASTM A479 UNS S32750 / A182 F53 Stud Bolts, which is a threaded rod with two heavy hexagon nuts. In the petroleum and chemical industry, these Super Duplex ASTM A479 UNS S32750 Stud Bolts is the most common bolt used for flanged connections.

S32760 Heavy hex nuts are slightly larger and thicker than standard (finished) hex nuts. There are numerous grades and the heavy pattern is typically used for large diameter and high strength bolts.

Cold drawn and cold rolled is the primarily prepare for 2205 Duplex Stainless Steel Pipe. Due to the material characteristic of high quality and hardness, duplex steel is more difficult to process than austenitic steel. It is very easy to damage, particularly for small thickness and large diameter pipes, it incorporates a long and hard-working methods.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex stainless steel is designed to combine improved resistance to stress corrosion cracking (including sulfide stress corrosion cracking), pitting, crevice corrosion and high strength when compared with other stainless alloys.

2507 has good weldability and workability, and it’s widely used in desalination equipment, chemical process pressure vessels, piping and heat exchangers.

A high molybdenum superaustenitic with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. Suitable for use in pulp mill bleach plants, seawater heat exchangers and chemical process equipment.

Super Duplex has all the benefits of other duplex steels, specifically the strength benefits of their biphasic structural composition of equal parts austenitic and ferritic stainless steel. This microstructure makes all duplex steels around twice as strong as regular single structure ferritic or austenitic steels, but Super Duplex has a higher chromium and molybdenum content, giving it considerably increased resistance to corrosion than its counterparts.

Alloy 2507 is a high strength duplex alloy. Super Duplex Plate is a dual ferritic and austenitic microstructured component designed with high concentrations of chromium, nickel and molybdenum. Super Duplex 2507 plate is used in systems where extra strength and enhanced corrosion resistance of different systems are required.

The duplex steels are one type of stainless steels that have ferritic and austenitic phases in their metallurgic microstructure.

Super Duplex UNS S32760 has high resistance to pitting, crevice corrosion and stress corrosion cracking. For optimum corrosion resistance, a pickled or machined surface finish is recommended.

Super Duplex stainless steel offers the same advantages as its Duplex counterpart. The main difference between the two is that Super Duplex has a higher chromium and molybdenum content, resulting in increased corrosion resistance.

Our Duplex Steel S31803 bar is an industrially processed nitrogen-modified steel that addresses common corrosion problems encountered with 300 series stainless steels.

These grades are excellent for fixed service simple flange connections, but slightly less so when forming a complex metallic shape. Fortunately, the workability of duplex into complex and rounded structures is less of an issue in structural steel given the wide preference for simple mild steel in non corrosive applications.

ASTM A240 Duplex 2205 Sheets contains approximately 40-50% ferrite. Often referred to as the work horse grade 2205 is the most widely used grade in the duplex family of stainless steels.

Duplex describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase.

Seamless pipe is not as strong as Duplex SS 2205 welded pipe, but is very dimensionally accurate. Dimensional accuracy is useful in highly sensitive applications where measurement and calculation accuracy is required.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.40

ASTM A182 F53 flanges refer to flanges made from super duplex stainless steel 2507 (UNS S32750) by a hot forging process.

At temperatures above 300¡ãC, the brittle trace components of 2205 precipitate, and at temperatures below -50¡ãC, the trace components undergo a ductile-brittle transition; therefore, this grade of stainless steel is not suitable for use at these temperatures.