Duplex Stainless Steel S31083 S32205 Flanges with lower nickel and molybdenum content

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The corrosion resistance properties of Duplex 2205 Pipe is much better as compared to alloy grade 316.

Grade UNS S31803 is termed as a duplex class due to its mixed Austenitic-ferritic microstructure. Duplex stainless steel alloys have an equal proportion of both austenite and ferrite, which is why Duplex Steel Fittings exhibit properties prominent to both classes.

There are SA 182 F53 S32750 Blind Flanges, socket weld flanges and weld neck flanges in this range of material. The different flanges are used in different applications set ups.

The A182 F51 material has carbon, 2% manganese, phosphorus, sulfur, 1% silicon, chromium, 4.5% nickel, 2.5% molybdenum and nitrogen it.

Through additions of chromium, molybdenum and nitrogen localized corrosion such as pitting and crevice attack are improved. Alloy 2507 has excellent localized pitting resistance.

The duplex steels are one type of stainless steels that have ferritic and austenitic phases in their metallurgic microstructure.

2205 fasteners are widely used in applications requiring good corrosion resistance and strength. Has excellent corrosion resistance; much higher than other grades. It eliminates localized corrosion types such as intergranular corrosion, pitting corrosion and crevice corrosion. Duplex 2205 bolts are ideal for environments containing chlorides and hydrogen sulfide for oil and gas extraction from sour wells, refineries, and chloride-contaminated process solutions.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A240 Type 2507 Super Duplex Plates must comply with ASTM A240. It is a specification of chrome and chrome-nickel stainless steel plate. Super Duplex 2507 plates are used in general applications and containers.

The astm a182 f53 vs f55 can come in different diameters ranging from ? inches to 48 inches with different pressure classes ranging from class 150 through class 2500.

Duplex2205 washers are dual phase austentic-ferritic duplex fasteners manufactured from alloy containing chromium, nickel alloy and molybdenum with restricted carbon content and minimum PREN35, SAF2205 fasteners have excellent corrosion resistance and high strength.

The yield strength is also higher, allowing component designers to reduce section size for load-bearing applications.

In S31803, about half of the ferrite grains transform into austenite grains (“islands”) as the material cools to room temperature. The result is a microstructure of approximately 50% austenite and 50% ferrite.

The machinability of 2205 steel pipe is low due to its high strength. The cutting speeds are almost 20% lower than that of grade 304.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Flat and lock washers can be cut or stamped from sheet to customer specifications. Since 2205 combines high strength, excellent corrosion and stress corrosion cracking resistance with very good pitting corrosion resistance and low thermal expansion, this may be the right alloy for your project nuts, bolts, spacers and studs.

Due to the excellent physical and mechanical properties of Super Duplex, the quality of Super Duplex steel fasteners can meet the high demands of the gas, oil and marine industries.

Duplex 2205 is a nitrogen enhanced duplex stainless steel designed to solve common corrosion problems encounutered with 300 series stainless steels.

The 2205 gasket is known as a duplex stainless steel gasket because it has a combination of ferrite and austenite and can be made into fasteners due to its high corrosion resistance. It has higher corrosion resistance than 316 stainless steel and is also highly resistant to stress corrosion and chloride cracking. 2205 has been determined to be cost effective because it is only 5% nickel and is significantly less expensive than Hastelloy C276 fasteners.

Duplex stainless steel (DSS) is featured with structure of two phases (¦Á and ¦Ã) and has characteristics of both ferritic and austenitic stainless steel. It has good corrosion resistance and high strength. It is alloyed with 18%-28% Cr and 3%-10% Ni in the condition of low C. Some steels also contain the alloy elements such as Mo, Cu, Nb, Ti and N, etc.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex stainless steel, alloy 2205 was designed as comprising 22% chromium, 3% molybdenum, and 5-6% nickel nitrogen. Alloy 2205 combines the desirable aspect of properties of both austenitic and ferritic grades.

The 2205 duplex stainless steel pipe also demonstrates good fatigue strength, as well as outstanding resistance to stress related corrosion cracking, crevice corrosion, pitting, erosion corrosion, and general corrosion in severe environments.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Seamless Pipes also execute properties like high strength and resistance to corrosion from organic acids. Also, these Pipes can withstand inorganic acids and chloride environments.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex steels have the best resistance to pitting corrosion. This steel has effective fatigue strength to resist corrosion of the steel. The steel can be used in a wide range of heating temperatures in the industry.

The material has high strength and corrosion resistance. The A182 F53 material is used to make flanges ranging from 1/2 inches to 48 inches under different standards such as ANSI, ASME, DIN and other international standards.

Austenitic has a low strength and a low resistance to stress corrosion cracking, while ferritic also has a low strength, poor weldability and poor low temperature toughness. Producing a chemical composition that combines austenitic and ferritic results in a metal that has a higher strength, good weldability, good toughness and resistance to stress corrosion cracking.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex 2205 is a nitrogen enhanced duplex stainless steel designed to solve common corrosion problems encountered with 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic (such as 304 stainless steel) nor purely ferritic (such as 430 stainless steel).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.48

Alloy 2205 (UNS S32305/S31803) is a 22% chromium, 3% molybdenum, 5-6% nickel, nitrogen alloy duplex stainless steel plate that, in addition to high strength and excellent impact toughness, also has high general, Localized and stress corrosion resistance.

ASTM A479 Super Duplex UNS S32750 Fasteners is a mixed microstructure of austenite and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades.

As experts in the field of fasteners, we recognize that this alloy can be used in a variety of applications including heat exchangers, piping, pressure vessels, tanks, fans, pulp and paper equipment, oilfield equipment and press rolls. At HT PIPE you can find Duplex Premium Gaskets in high quality.