Duplex steel A815 WPS32750 elbow stainless steel elbow 45 degree LR SR

They come in different sizes and types; for example, the SS 304 45 degree elbow is used to change the direction of the pipe by a 45 degree angle. Likewise, the UNS S30400 90-degree elbow changes the direction of the pipe by a 90-degree angle. According to customers’ requirements, we can provide exclusive elbows to meet their needs.

ASME B16.9, ASME B16.28. These Stainless steel 304/ 304L tube/pipe fittings have special quality finishing and duress for long life, high pressure and zero defects.

The stainless steel 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Stainless steel butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. 90 degree elbows are available in long radius and short radius.

These fittings are built with non-toxic, corrosion-resistant materials for use in industries that demand ¡°food-grade¡± cleanliness, ensuring zero contamination of the fluid medium.

The A420 Grade WPL6 fitting is used in pipelines in the paper and pulp industries, condensers, sea water, marine engineering, waste water management and pollution control systems.

Alloy 20 was originally developed for use in sulfuric acid service found in facilities such as pulp and paper mills. With good general corrosion properties, Alloy 20 usage has expanded in chemical, petrochemical and power generation plants.

1 – 4 inch short type t, sanitary stainless steel ASTM A403 WPS31254 is an austenitic chromium alloy which is the make-up of the steel is 18 percent chromium and 8 percent nickel. Stainless Steel 304 Pipe Fittings has high ductility, excellent forming, spinning and drawing properties.

In fact, the above properties of 317L fittings are considered to be much better than traditionally used stainless grades such as 304, 304L, 316 and 316L. The alloys used for stainless steel 317L are known to provide better resistance than 316L, especially in highly corrosive environments, which may contain chemicals such as sulfur-containing media, chlorides and other halides.

Incoloy 800H is a solution heat treated, carbon controlled version of its parent Alloy 800.

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).

Stainless steel tees are pipe fittings and pipe joints for branch pipes of the main pipeline. Stainless steel tee is divided into equal diameter and different diameter. The size of the connecting end of the equal-diameter tee is the same, the size of the main pipe of the reducing tee is the same, and the branch pipe is smaller than the main pipe. The stainless steel threaded tee has three internal threads on the port. It is an industrial pipe fitting.

ASTM A860 WPHY 46 are Wrought High Yield fittings and are generally used at High-pressure requirements. A860 refers to the high strength of the fittings. ASTM A860 WPHY 46 Pipe Fittings are known for high tensile strength and corrosion resistance. Available in numerous specifications, these ASTM A860 Fittings are manufactured with high-grade steel & tested by a quality expertise team.

Among the various grades of stainless steel, one grade is austenitic steel containing columbium. Fittings made from it are called stainless steel 347 fittings. They are widely used at high temperatures and have amazing forming and welding quality. The addition of columbium to stainless steel 347 weld fittings provides resistance to intergranular corrosion. It also shows improved corrosion resistance in strongly oxidizing environments. They are widely used to install, connect and configure other products.

ASTM A815 S32205 Fittings can efficiently be used in environments within 570 degrees F- post this temperature, these fittings will start losing their toughness. The S32750 Buttweld Fittings have some excellent mechanical properties such as high strength and resistance towards pitting and different types of corrosion. Our Super Duplex Steel S32750 reducer is also known for its strong weldability.

The 317L (00Cr19Ni13Mo3, UNS S31726) alloy is a molybdenum-based austenitic stainless steel. It is more resistant to chemical corrosion than conventional chromium-nickel austenitic stainless steels such as 304 alloy. In addition, compared with conventional stainless steel, 317L alloy has higher ductility, stress corrosion resistance, compressive strength and high temperature resistance. It is a low carbon grade or L grade, which is resistant to sensitization during welding and heat treatment.
Compared with 316L, 317L steel has good seawater resistance and SCC resistance, and is used in chemical ships, chemical products Reactor and other chemical equipment requiring high corrosion resistance.

Duplex stainless steel pipes and fittings are generally less expensive because of the lower proportions of alloying elements used in the manufacture of duplex stainless steels. Compared to austenitic stainless steels, duplex stainless steels have higher yield strengths, so users can buy duplex pipes and duplex pipe fittings in relatively lower thicknesses.

Titanium behaves as an inert element in the presence of oxygen and water, which means it does not react with oxygen and water at ambient temperature conditions.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

We supply Stainless Steel 316H Elbow Pipe Fittings to a variety of customers including fabricators of pressure vessels, industrial boilers and heat exchangers. Fusion welding performance for Stainless Steel 316H Reducer Pipe Fittings is excellent both with and without fillers. Stainless Steel 316H Tee Pipe Fittings, with its higher carbon content has application at elevated temperatures, as does the stabilised grade 316Ti.

In general, the Type 316 grade can be considered equally good in a given environment. A notable exception is intergranular corrosion in the heat-affected zone on welds and susceptible alloys in sufficiently corrosive environments. In such media, Type 316L is more suitable for welding conditions than Type 316 because the low carbon content increases resistance to intergranular corrosion.

It covers steel fittings of seamless and welded types. Steel Pipe fittings are applied in pressure pipelines and in pressure vessel fabrications.

Grade 1.4404 or 316L is an austenitic stainless steel AISI 316 with very good corrosion resistance due to its high chromium and molybdenum content and low carbon content. Its strength in the hardened state is about 600 MPa for large diameters, but for small sections, the strength can be increased by cold working.

This fitting is used in piping systems to change direction or function and is mechanically connected to the system. The easiest way to do this is to bend the pipe in the desired direction, but this process will stretch and thin the outer wall of the pipe while thickening and wrinkling the inner wall of the pipe. Our 2205 line of duplex fittings includes long radius elbows and short radius elbows.

HASTELLOY C-276 alloy is available in the form of plates, sheets, strips, billets, bars,
wires, pipes, tubes, and covered electrodes.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.