Duplex2205 S31803 1.4462 M10 washer DIN125

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

MONEL K500 is a age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.

Alloy 625 has excellent fatigue strength and stress corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is often used to weld AL-6XN. This alloy is resistant to a variety of severe corrosive environments, especially pitting and crevice corrosion.

We also provide various alloy steel ASTM A182 F5 flanges, such as ASTM A182 F5 slip-on flanges, alloy steel F5 butt weld flanges, F5 alloy steel socket weld flanges, A182 F5 alloy steel blind flanges, alloy steel F5 Orifice Flange, A182 Alloy Steel F5 Blind Flange, A182 F5 Threaded/Threaded Flange, Alloy Steel F5 Reducing Flange, ASTM A182 F5 Alloy Steel Ring Type Joint Flange (RTJ) etc.

This grade of the fitting is used in constructions for use in pressure piping and pressure vessel service at low temperature. Also, this fitting is available in two types in welded and seamless.

Increased performance is obtained by adding aluminum and titanium to a nickel-copper matrix. Flanges are pipe fittings that connect pipes to each other and are used to connect pipe ends. In addition, Monel K-500 flanges can be perfectly matched with various Monel K-500 pipes to ensure the stability and firmness of the connection.

This provides the flanges with high corrosion resistance and higher mechanical properties. Please contact us for your orders of F53 flanges.

The Nickel Alloy 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Stainless Steel 316L Flange is used to terminate the end of a piping system. The Stainless Steel 316L blind flange is basically a flange that does not have a hub or a bored center. Blind flanges have the face thickness of a flange, a matching face type, and similar bolting pattern. Stainless Steel 316L Blind flanges can also be used to seal a nozzle opening on a pressure vessel.

These alloy steel wp22 seamless pipe fittings are produced with the aim to provide better performance and fulfill all the requirements of industrial applications.Our A234 WPL22 Street Elbows have both the ends threaded, thus affixing on pipes in the drainage, plumbing, and water piping systems effortlessly.

Its high nickel content, a minimum of Ni 72%, combined with its chromium content, provides users of Nickel Alloy 600 a number of benefits including: Good oxidation resistance at high temperatures, Corrosion resistance to both organic and inorganic compounds and Resistance to chloride-ion stress corrosion cracking.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

It also has a high resistance to pitting in chloride solutions, a high resistance to both crevice and stress corrosion cracking. Alloy 904L performs better than other austenitic stainless steels due to the higher alloying of nickel and molybdenum.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

SS 254 SMO washer is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chlorine-containing media. ASTM A312 Stainless Steel 254 SMO washer is a very high end austenitic alloy designed for maximum resistance to pitting and crevice corrosion. 254SMo contains high levels of chromium, molybdenum and nitrogen, making it particularly suitable for high chlorine environments such as brackish water, seawater, pulp mill bleaching plants and other high chlorine process streams.

This alloy is especially useful in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some restrictions, especially when used in welded structures.

Brushing these boards with stainless steel wire after the welding operation usually removes the hot color and likewise creates surface areas that do not require additional pickling.

The outstanding oxidation resistance of HASTELLOY X pipe bend is illustrated below. Tests were conducted by exposing samples to dry air at 2000 Deg. F. and to dry air pressurized to 300 psi at 1750 Deg. F.

Hastelloy C-276 alloy can be forged, hot-upset, and impact extruded. Although the alloy tends to work-harden, it can be successfully deep-drawn, spun, press formed or punched.

ASTM B564 UNS N04400 Pipe Flang Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions.

Inconel 625 alloy is widely used in chemical processing, pollution control, evaporators, nuclear reactors, marine industry and more.

We use state-of-the-art technology to precisely manufacture flanges such as ASTM A182 Class F5 Socket Weld Flanges. Buying an ASME SA182 F5 flange or any other flange from us will guarantee quality, economy and precision.

sa335 P5 P5 materials used to make ASTM A335 pipes etc. must meet chemical composition, tensile properties and SA335 P5 hardness requirements. This type of alloy steel pipe is used in applications that require high temperature service. ASTM A335 P5 Pipe Supplier’s Composition, A335 P5 Allowable Stress contains lesser amounts of Nickel and Manganese as they increase the hardness of the pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.36

Stattin Stainless stocks a complete range of grades 304 and 316 fittings. The range includes 45¡ã, 90¡ã and 180¡ã LR Elbow, 90¡ã SR Elbow, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Cross, Hose Tail, Seal Flange, cover and spray ball.

Super Duplex Steel 1.4410 Flanges are having low alloying costs as compared to the similar ferritic and austenitic grade along with resistant to corrosion in the chloride-containing atmosphere because of well-enhanced yielding and tensile strength.

309 stainless steel is a type of austenitic stainless steel that is often used in high-temperature applications due to its excellent heat resistance. SA240 309 plate contains a high percentage of chromium and nickel, which gives it good corrosion resistance, as well as a high degree of strength and durability. SS 309 Strip (UNS S30900) is an austenitic stainless steel developed for use in high temperature corrosion resistance applications. The SA240 309 plate resists oxidation up to 1900°F (1038°C) under non-cyclic conditions. Frequent thermal cycling reduces oxidation resistance to approximately 1850°F (1010°C).

The 316 stainless steel reducer is good to be used in water, marine and sea water applications to reduce the size of a pipe line. The ASTM A403 Grade wp316 tee is used to divide or connect two pipes with another pipe. The 316 grade of steel is also used for fittings in food grade applications. The ASME SA 403 WP 316 Pipe Cap is a unique type of fitting in that it closes a pipeline rather than connecting two parts together.

With its high levels of chromium, molybdenum, and nitrogen, 6 Moly alloys have excellent resistance to a wide range of chemicals and are especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high chloride process streams.

Incoloy 825 alloy pipe is made from basic elements such as iron, nickel and chromium, which provide basic rust and pitting resistance at ambient temperatures. This alloy has elements such as molybdenum, titanium and copper added in small parts, adding more to the product and increasing its machinability even in marine conditions.

Super Duplex Steel Pipes and Tubes are available in various dimensions, shapes like square, rectangle, and so on and enormous sizes. We are offering the standard quality of products of our customers. Our Product is offering excellent corrosion resistance and remarkable dimensional accuracy.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Aunque la aleacion 6MO es mucho mas fuerte que los grados austeniticos comunes, tambien se caracteriza por su alta ductilidad y resistencia al impacto.