Duplex2507 1.4410 ASTM A815 S32750 duplex stainless steel elbow

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

304 has good oxidation resistance in intermittent duty up to 870¡ãC and continuous duty up to 925¡ãC. However, continuous use at 425-860¡ãC is not recommended. In this case, 304L is recommended because of its resistance to carbide precipitation.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

Duplex Steel S32550 Pipe Fittings has high stress corrosion resistance. These UNS S32550 Pipe Fittings also has lower thermal expansion than austenitic stainless steels. It also has higher thermal conductivity than austenitic stainless steels, and excellent general corrosion resistance in a wide variety of corrosive chemicals including seawater and industrial acids

ASME B16.9 SS Pipe Fittings that have matching pipe schedules offer seamless flow inside the pipe. A properly fitted elbow helps in gradual transition via pipes which can be terminated using a Stainless Steel pipe cap. Most of the buttwelds are beveled ended. This helps in creating full penetration without the need for extra penetration for ASME B16.9 SS Pipe Fittings.

Grade 316 stainless steel pipe bend is readily weldable by most fusion techniques (GTAW / TIG, GMAW / MIG / MAG, MMAW / stick, SAW), with no preheat, postheat or control of interpass temperature needed.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction covered by the latest revision of Specification A960/A960M. Fittings differing from these standards may be furnished in accordance with Supplementary Requirement S58 of Specification A960/A960M.

The 200 series is a class of austenitic(highly corrosion-resistant)stainless steels that are characterized by havinglow nickel content. These are also referred to as chrome-manganese (CrMn) stainlesssteel.Austenitic steels, which includes both the 200 and 300 series stainless steels, are defined by their face-centered cubic structure. That is, the crystal structure has one atom at each corner of the cube and one in the middle of each face.

Duplex Steel Buttweld Fittings demonstrate better localized corrosion resistance in comparison to both grade 316L and 317L. Hence these duplex steel fittings are used in applications involving several key industrial fields such as chemical plants, seawater pump, seawater desalination plant, and so on.

These elbows provide good service in harsh environments. The elbow is used to change the flow direction of the medium by 30 degrees.

Low carbon based wrought iron high yielding A860 WPHY 70 elbow fittings are chemically composed of metallic elements like – nickel, chromium, molybdenum, manganese, copper, vanadium, titanium, niobium, sulphur, silicon and phosphorus. Addition of these metal elements to the alloy makes it stronger and gives it increased resistance to corrosion. The yield strength of WPHY 70 material is 570 Mpa and its tensile strength is 485 Mpa.

Due to the addition of chromium, UNS N08800 butt weld elbows are resistant to oxidizing media such as nitric acid, salts and nitrates. These nickel alloy 800HT elbows can withstand high temperature environments and have a good surface finish.

The chemical behavior of titanium metal has remarkable similarities with zirconium and silica.

Our Stainless Steel 904L Buttweld Fittings (WNR 1.4539) are used in Power plants using fossil or nuclear fuels, and also in geothermal energy for harnessing heat from the earth. SS 904L Welded Tube Fittings are used for the cold chain to keep produce fresh, drinks, and frozen foods at a set temperature. SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings are used in industries such as Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry.

C276 is suitable for off-shore applications where hydrogen-sulphide stress corrosion cracking resistance is essential.

ASTM A403 WP316L the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

HT PIPE has an excellent production company for designing and developing superior Pipe Fittings SS 316/316L. During the testing and production phases, our expert team examines strictly SS 316/316L buttweld pipe fittings.

C22 has excellent resistance to chloride-induced localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking.

Alloy Steel Buttweld Fittings is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment. It has many inherent advantages such as it provides permanent leak proof to the fittings. The continuous metal structure formed between fitting and pipe gives strength to the system. Smooth inner surface and gradual directional changes minimize the action of corrosion and erosion and reduce pressure losses and turbulence. It doesn’t make it any less vulnerable to rust when exposed to the elements since it is ferrous

We manufacture Alloy 825 tubing for use in pollution control tools, oil piping and gas equipment. In addition, they are used in the power generation, petrochemical and pharmaceutical industries.

Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure.

We offer a wide range of stainless steel 904l buttweld fittings such as ANSI B16.9 Stainless Steel 904L Buttweld Elbow, 904L Stainless Steel Buttweld Reducer, Stainless Steel UNS N08904 Buttweld Fittings, Stainless Steel 904L Buttweld Tees, B366 Stainless Steel 904L Long Radius Bend Pipe Fittings, 904L Stainless Steel Buttweld 90 deg Elbow, Stainless Steel DIN 1.4539 Pipe Fittings, 904L Stainless Steel Buttweld End Pipe Cap. etc. These stainless steel 904l buttweld fittings are available in various sizes, shapes as per the requirements of our clients.

Stainless Steel 304 Fitting Elbow is an austenitic chromium alloy with a steel composition of 18% chromium and 8% nickel. Stainless steel 304 pipe fittings have high ductility, excellent forming, spinning and drawing properties.

MONEL K500 retains the excellent corrosion resistant characteristics of 400 and has enhanced strength and hardness after precipitation hardening when compared with 400.

The main difference between stainless steel bottle caps and carbon steel bottle caps is the difference in material. The chemicals contained in stainless steel caps will keep the surface of the cap from rusting and corroding for a long time.

Stainless Steel 304 Pipe Fittings are made up of 18/8 chromium nickel alloy steels. The SS 304 Elbow has 18% chromium and 8%nickel in its composition. This makes the SS UNS S30400 Buttweld Fitting to be stronger with 215MPa minimum yield strength and 505MPa minimum tensile strength. The combination makes Stainless Steel 304 Buttweld Pipe Fittings corrosion resistant and high temperature capable up to 889 degrees Celsius.

Using the fracture work theory calculation of impurity elements segregation at grain boundaries, it is shown that Mg, Cr and Co can improve the grain boundary bonding force of Ni-Cu alloy, so they can improve the high temperature plasticity of Monel K-500 alloy.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Typical application for MONEL K500 which takes advantage of high strength and corrosion resistance are pump shafts, impellers, propeller shafts, valve components for ships and offshore drilling towers, bolting, oil well drill collars and instrumentation components for oil and gas production. It is particularly well suited for centrifugal pumps in the marine industry because of its high strength and low corrosion rates in high-velocity seawater.

Stainless Steel 904L Buttweld and Forged Fitting have exceptional quality completing and coercion for long life, high weight. Stainless Steel 904L Buttweld and Forged Fitting are fabricated to support high weight and item guarantee. Stainless Steel 904L Buttweld and Forged Fitting in the type of Bend, Elbow, Tee, Reducer, Cap, Stubend, Nipple, Union, Cross, Coupling, Socket, Plug, Sockolet, Weldolet, Threadolet, Elbolet, Nipolet Etc.