equal tee reducing tee s32750 tee

What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel. While the reduction in nickel content gives the metal lower mechanical properties, the higher molybdenum and chromium content almost makes up for the lack of nickel in duplex stainless steel fittings.

A pipe tee is a sort of pipe connection that is T-shaped and has two outputs that are 90¡ã to the mainline connection. It’s a small section of pipe having a side exit. Pipe Tees are being used to join pipes by forming a 90-degree location also with streams.

We never compromise on the quality and quantity standards and specifications to manufacture these duplex steel UNS S31803 butt welded pipe fittings. We are mass producing these duplex accessories using highly advanced technology and tools. Help our clients in emergencies or any emergency.

Hastelloy B2 pipe bend resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition.

Super Duplex 2507 Equal tees are the most common fittings.

Applications in the chemical process industry involving sulfuric, phosphoric, hydrochloric and acetic acid.

Inconel600 is suitable for welding with the same material or other metals by any traditional welding process, such as tungsten electrode inert gas welding, plasma arc welding, manual sub-arc welding, metal inert gas shielded welding, molten arc inert gas shielded welding, and pulsed arc welding. Welding is the preferred solution. When using manual arc welding, it is recommended to use a shielding gas mixed with various components (Ar+He+H2+CO2).
Welding of Incoloy 825 must be carried out in the annealed condition and cleaned with a stainless steel wire brush to remove stains, dust and various markings. When welding the root of the weld, extreme care must be taken (Argon 99.99) to obtain the best quality of the root weld so that the weld does not produce oxides after the root has been welded. Color from the weld heat-affected zone should be removed with a stainless steel brush while the weld area is not cool.

Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions.

UNS S32205 Pipe Fittings are applicable in chemical processing, pulp and paper production, marine and other high chloride environments, Liquor tanks and paper machines, Transport and storage, Oil and gas exploration and processing equipments. Oshwin Overseas has huge inventory of Duplex UNS S31803 Pipe Fittings in different standards and different dimensions, thickness and sizes. Oshwin Overseas are proud 2205 Duplex UNS S32205 Stainless Steel Pipe Fittings Suppliers in following forms and shapes.

Monel K500 pipe bend and elbow are exceptionally good dimensional stability.

Our Carbon Steel Butt Welded Pipe Elbow is a carbon steel pipe solution made of forged carbon steel and is mainly used in the high temperature service range.

Strong and Oxidation Resistant to 2200 Deg. F (1200 Deg. C) – HASTELLOY X pipe bend is a solid solution strengthened grade has good strength and oxidation resistance up to 2200 Deg. F (1200 Deg. C).

A234 WPB steel pipe fittings mean the pipe fitting which material is ASTM A234 WPB,they are used for the pressure piping systems of moderate and high temperature services.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with good mechanical properties from sub-zero temperatures up to about 550 ¡ãC (1020 ¡ãF) and is approved for pressure vessels with wall temperatures from -10 to 425 ¡ãC (14 to 800 ¡ãF) according to VdTUV-Wbl. 263 and up to 900 ¡ãF (480 ¡ãC) according to ASME Boiler and Pressure Vessel Code.

Street elbows can also be used in tight spaces where conventional elbows cannot be easily installed. These elbows are available with a 90-degree bend angle, but are also available in 45 and 22.5 degrees. These Alloy 800 fittings are commonly used in sewers, drains, vents, gas pipes and more.

In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.

Inconel 625 elbow was designed to have better weldability than earlier alloys, with no signs of cracking when exposed to strain and temperature changes post-welding.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

Stainless steel tees are used to connect 3 pipes and join them into 1 to mix fluids. Whereas steel reducers are used to reduce the diameter of pipes. Stainless steel welded pipe fittings have a melting point of 1400 degrees Celsius and an operating temperature of 870 degrees Celsius.

A stainless steel butt weld cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.
A Stainless Steel Butt Weld Cap is used to seal the end of a pipe or a particular butt weld fitting branch or orifice. Typically butt weld pipe caps are used at the end of a piping system or if maintenance is required the pipe cap can blind or isolate the rest of the system to keep it running while maintenance or repairs are performed.

Usage of Duplex 2507 should be limited to applications below 600¡ã F (316¡ã C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy 2507.

ASTM A403/ A182/ A240 and ANSI B16.9/16.28/ B16.25/ MSS SP-43. 316/316L is a nickel-chromium stainless steel alloy to which copper and molybdenum have been added. It is a non-magnetic austenitic stainless steel, so it is especially useful in severely corrosive conditions.

ASTM A182 Duplex Steel 2205 Elbow is used in high temperature applications where fluid direction must be changed smoothly without creating too much stress on the bend. There are different types of elbows; short radius, long radius, 90 degree and 45 degree. There are duplex steel Astm A815 fittings are forged stainless steel that can withstand high impact tension. High tension, high strength pipes can use this type of fitting.

316/316L has excellent oxidation and pitting resistance properties. Pipe fittings SS 316 / 316L are ideal for many industrial processes that require high resistance in harsh environments. These tubular fittings can withstand pitting corrosion from many acidic solvents, chemicals, and chlorides. We are known for providing products according to the urgent requests of our esteemed customers. Our assembled SS 316/316L pipe connectors are of high quality and can withstand high pressure and high temperatures.

Stainless steel 316L fittings are made from a low carbon version of the 316 material. Elbows also have different variations. The usual elbow is a 90 degree elbow, with 45 degree elbows and short and long radius versions also available.

Inconel 601 (N06601) nickel-based alloy plasticity:
Inconel 601 (UNS N06601) nickel base alloy is relatively easy to hot work. The heating temperature is 1150~1200C, and the thermal processing temperature is
1050~1200C, simple processing can be carried out below 850¡ãC.

The high nickel content gives the alloy resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking.

we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

Stainless steel ASTM A403 WP316L fittings can be annealed and hardened by a cold working process. Stainless Steel ASTM A403 WP316L Fittings can withstand service containing nitric and phosphoric acids and the resulting oxidation.