factory alloy steel 20 28 alloy steel N08020 hex head bolt 1.4563 bolts

Applications in air pollution control include stack liners, ducts, dampers, scrubbers, stack-gas re-heaters, fans and fan housings.

Alloy 20 is an iron-based austenitic alloy with excellent corrosion resistance to a variety of different media, proven in many applications such as flue gas desulfurization, chemical processing, food processing and storage, and pharmaceutical applications to name a few example. Our UNS N08020 Alloy 20 Studs are durable and perform well in acid affected environments such as chemical processing and sulfuric acid production centers.

Monel nickel copper k500 hex bolts are often used for standard and advanced applications where a combination of strength and corrosion resistance is a necessity. Monel UNS N05500¡¯s advanced quality corrosion resistance and usability in extreme conditions makes it the perfect choice for a wide range of industrial applications. Some of which, include:

Chemical processing equipment
Marine applications
Petroleum tills & gasoline tanks
Heat exchangers
Valves & pumps
Propeller shafts
Process vessels
And more

Hastelloy B3 has excellent resistance to hydrochloric acid at all concentrations and temperatures. In addition, it greatly improves structural stability compared to previous B-type alloys, reducing concerns during welding, fabrication and service.

The alloy is ductile and readily forms Inconel 601 fasteners. It has high mechanical strength, good toughness and excellent corrosion resistance.

Inconel 625 is an austenitic nickel-based superalloy. High levels of molybdenum and niobium strengthen the chrome-nickel matrix of alloy 625 screws. Inconel 625 Bolts are fasteners made from a nickel-based alloy containing chromium and molybdenum, with additions of aluminum and titanium.

Unlike chrome-nickel steel, this steel does not reduce corrosion resistance due to carbide precipitation. Inconel WNR 2.4668 Nuts are used in excellent procedures including welding materials to more or less materials of the same chemical composition, this is used in the manufacture of tools for the management of sulfuric and phosphoric acids.

926 is an austenitic stainless steel alloy with a chemical composition similar to alloy 904L with 0.2% nitrogen and 6.5% molybdenum. The content of molybdenum and nitrogen significantly increases resistance to pitting and crevice in halide media. At the same time, nickel and nitrogen not only ensure the metallographic strength, but also reduce the separation of the intergranular thermal tendency. Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. They are used in a variety of heavy duty applications including chemical storage and processing, aerospace and food processing.

Monel 400 Bolt is a nickel-copper alloy, a solid solution nickel alloy that can only be hardened by cold work. Known for its corrosion resistance to reducing media and seawater, Monel 400 is also tougher than copper alloys in oxidizing environments. Monel 400 bolts, also known as Alloy 400, are also used in high temperature, caustic and salt solution applications.

Hastealloy is a term that refers to a group of corrosion resistant metal mixtures that are based on nickel. Hastealloys have a unique combination of properties that provide them with significantly stronger corrosion resistance capabilities compared to traditional alloys. As such, it was widely accepted in the chemical process and associated industries, and now has a 50-year-old track record of proven performance in a vast number of corrosive chemicals.

Inconel 625 Bolts were developed in the 1960s as a vapor-lined piping material to provide high strength even in extreme high temperatures ranging from freezing low temperatures to 1800¡ãF. Inconel 625 Bolts, also known as Alloy 625, are known for their amazing ability to maintain strength and heat resistance in and out of corrosive environments.

Inconel can be described as a chromium and nickel based superalloy, mainly used in high temperature applications. Inconel 600 bolts are also highly resistant to oxidation. It is important to note that the Inconel 600 device can operate at temperatures above 1000 degrees Celsius. Alloy 600 fasteners also offer outstanding properties such as resistance to carburization and chloride-rich environments. Alloy 600 hex nuts can also be used in environments with a high risk of corrosion. This means that Inconel 600 hex bolts and other fasteners made of a given material can be used in furnaces and chemical plants where there is a high risk of corrosion.

Inconel Alloy 718 is designed to exhibit excellent high yield strength, tensile strength and creep rupture properties at temperatures up to 1300¡ãF.

Las aplicaciones tipicas de la alta resistencia y resistencia a la corrosion de MONEL K500 son ejes de bombas, impulsores, ejes de helices, componentes de valvulas para barcos y torres de perforacion en alta mar, pernos, collares de pozos de petroleo y componentes de instrumentacion para la produccion de petroleo y gas.

Alloy-20 is a “super” stainless steel designed for excellent resistance to acid attack. Its nickel, chromium, molybdenum and copper content contributes to its overall resistance to chloride stress corrosion cracking and general pitting attack. It is virtually immune to chloride stress corrosion cracking. It is often found in chemical mixers and fertilizer manufacturing equipment. In general, it is an economical alternative to alloy C276 and other materials with a higher nickel content.

Hastelloy X alloy is a nickel-chromium-iron-molybdenum alloy with excellent oxidation resistance and high temperature strength, while still being easy to manufacture. It has also been found to be extremely resistant to stress corrosion cracking in petrochemical applications. This alloy exhibits good ductility after prolonged exposure to temperatures of 1200¡ã, 1400¡ã and 1600¡ã (650¡ã, 760¡ã, 870¡ã Celsius) for up to 16,000 hours.

Nimonic Alloy 80A is a nickel-chromium alloy with good oxidation and corrosion resistance. Nimonic Alloy 80A also has high creep rupture and tensile properties at temperatures up to about 815?C. Alloy 80A is precipitation hardened by the addition of the elements aluminium and titanium.

Since iron is its most abundant constituent, it is classified as super-austenite. Even though its nickel content is less than half, the UNS system classifies alloy 20 as a nickel-based alloy. Alloy 20 is resistant to hot sulfuric acid, while Alloy 20 is stabilized with columbium to minimize carbide precipitation during welding. It has very good mechanical properties and can be manufactured relatively easily. Although the alloy was designed for industries related to sulfuric acid, it is widely used in the chemical industry all over the world.

Alloy 20 Stud Bolts are externally threaded fasteners without a head, used with 2 nuts on either side, substituting a usual “bolt & nut” assembly. Stud bolts are prominently used in flange connections. Depending upon their design and threading patterns, there are different types of stud bolts as below.

Inconel 825 fasteners have excellent resistance to both reducing and oxidizing acids in addition to general corrosion. These Incoloy 825 fasteners also resist stress-related corrosion cracking, localized corrosion such as pitting and crevice corrosion. Incoloy 825 is particularly resistant to acids such as sulfuric and phosphoric acid. Austenitic stabilizing elements such as nickel, one of the main alloying agents for nickel alloy 825 hex bolts, remain unchanged even in high temperature environments. Since the structure remains unchanged, the DIN 2.4858 studs are less likely to deform.

Inconel 718 corrosion resistant fasteners retain their strength and shape over a wide temperature range and do not exhibit the creep of aluminum and steel products during temperature changes.

The low carbon minimizes carbide precipitation during welding to maintain resistance to intergranular attack in heat-affected zones of welded joints.

Like many other nickel alloys, it is ductile and easy to form and weld. This alloy is used in most industrial environments where corrosive chemical environments exist and other alloys fail.

Alloy 600, or Inconel 600, is one of the most popular superalloys and is commonly referred to as UNS N06600. Inconel 600 is a non-magnetic nickel-chromium alloy with excellent corrosion resistance and mechanical properties, and good weldability over a wide temperature range.

Inconel 600 fasteners are made of Inconel. Different grades of Inconel have different compositions. ASTM B166 Inconel 600 Stud Bolts are made from an alloy with 72% Nickel, 14% Chromium, and 6% Iron, which also contains Carbon, Silicon, Manganese, Sulfur, and Copper.

Alloy 800 bolts (WNR 1.4876 bolts) resist embrittlement due to nickel-containing sigma-phase precipitation and chloride stress corrosion cracking. It has further modifications to the combined levels of aluminium and titanium (0.85-1.20%) to ensure optimum high temperature performance. These are called UNS N08800 bolts and are actually for high temperature structural applications. At the same time, the corrosion resistance of these bolts is quite high. We offer these types of alloys in all material grades, sizes and sizes.

Hastelloy B3 fasteners are an excellent choice for bolting applications in chemical processing units because the alloy has excellent resistance to hydrochloric and sulfuric acids, while maintaining mechanical strength at elevated temperatures. HT PIPE offers all types of bolts, screws, studs, threaded rods, nuts, washers and custom bolts in Hastelloy B3.

Monel K500 Fasteners are thermally applied or manipulated to affect precipitation. This process is called age hardening. These fasteners have a greater tendency to stress corrosion cracking in a variety of harsh environments when exposed to the age hardening process. It has three times the yield strength compared to the standard version. Monel 500 material is an age-hardenable nickel-copper alloy that combines the corrosion resistance of Alloy 400 with the high strength corrosion fatigue and erosion resistance.

Monel K500 bolts are comprised of a nickel alloy that combines the outstanding corrosion resistance of Monel 400 with increased strength and hardness.