Flat Face Blind Flange Forgings Rings Disc

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

UNS31803 has been supplemented by S32205 (F60) which dual conforms to S31803 but has a higher minimum N, MO, NI and Cr which guarantees a better corrosion resistance.

With an increased chromium content compared with F51 it offers improved pitting corrosion resistance.

Duplex alloys have some of the ferritic stress corrosion cracking resistance of common austenitic stainless alloys and many of the superior formability properties that are more cost effective than high nickel alloys.

Super Duplex 2507 has more than twice the strength of conventional austenitic stainless steels in the annealed condition.

Type: Seamless, Welded

WT: SCH5-SCH80S

Duplex 2205 stainless steels are called “duplex” because they have a two-phase microstructure consisting of ferritic and austenitic stainless steel grains. When duplex stainless steel melts, it solidifies from the liquid phase to a fully ferritic structure. As the material cools to room temperature, about half of the ferrite grains transform into austenite grains (“islands”). The result is a microstructure of approximately 50% austenite and 50% ferrite.

Super Duplex tubes for the increasing hostile temperature and operating environments – where maximising operating efficiency demands total product reliability. 2507 Super Duplex Products therefore have very his corrosion cracking resistance and tensile strength.

UNS S31803 Bolted Fasteners are used in marine, agricultural, chemical, construction, shipping, aviation, nuclear and industrial equipment.

Grade 2205 is the most widely used duplex stainless steel grade. Fittings of this grade finds applications due to both their excellent corrosion resistance as well as their high strength.

2205 is also more formable under pressure than other ferritic grades. The greater toughness of this grade also outweighs most of its concerns.

Another advantage of grade 304 stainless steel bar over grade 303 is that it is slightly harder and has better corrosion resistance. Because of this, grade 304 stainless steel bar is used in large quantities in the manufacture of fasteners and fixtures such as nuts, bolts, washers, clips, fittings and clamps. Products made from grade 304 stainless steel in the fastener industry are often referred to as “A2”.

2101 is a low nickel, lean duplex stainless steel possessing both superior strength and chloride stress-corrosion cracking resistance when compared to 300 series stainless steel.

Super Duplex has all the benefits of other duplex steels, specifically the strength benefits of their biphasic structural composition of equal parts austenitic and ferritic stainless steel. This microstructure makes all duplex steels around twice as strong as regular single structure ferritic or austenitic steels, but Super Duplex has a higher chromium and molybdenum content, giving it considerably increased resistance to corrosion than its counterparts.

The applications of the flanges include petroleum, petrochemical, oil and gas and other high performing piping systems.

The pressure-temperature ratings for ASTM A182 F53 flanges are the same as that for other duplex stainless steels.

Duplex 2205 stainless steel plate has excellent corrosion resistance, much higher than grade 316. It can withstand localized corrosion types such as intergranular, pitting and crevice.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Seamless pipe is not as strong as Duplex SS 2205 welded pipe, but is very dimensionally accurate. Dimensional accuracy is useful in highly sensitive applications where measurement and calculation accuracy is required.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.40

S32750 Welded Pipes are used in offshore platforms, Mechanical and structural components, sea-water piping, Desalination Plants, Heat exchangers and chemical processing industries.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

A high molybdenum superaustenitic with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. Suitable for use in pulp mill bleach plants, seawater heat exchangers and chemical process equipment.

Duplex 2205 nuts and nuts are widely used in applications requiring good corrosion resistance and strength in marine and harsh environmenuts.

Super Duplex Stainless Steel 1.4410 Nuts?is a super duplex stainless steel with 25 percent chromium, 4 percent molybdenum, and 7 percent nickel. High molybdenum, chromium and nitrogen content in?Super Duplex 2507 Hex Nuts?help the material withstand pitting and crevice corrosion.?

Duplex 2205 bolts have a ductile to brittle transition at -50¡ãC and also become brittle at 300-1000¡ãC, so a temperature of -50¡ãC to 300¡ãC is recommended. Exposure to above 300¡ãC will not only cause embrittlement of 2205 bolts, but will also reduce corrosion resistance.

Super duplex steel flanges are very good for servicing a severe corrosive atmosphere like offshore and marine applications.

The flanges shall not be used at temperatures over 600¡ãF [315¡ãC] since it may be subject to embrittlement after service at moderately elevated temperatures.

Applications for duplex 1.4462 coated studs are the oil and gas industry, marine industry, chemical industry, paper and pulp industry, etc. We offer Lean Duplex and Standard Duplex in a wide selection of duplex grades. Duplex 2205 studs have specific properties for different environments. The chemical composition of the duplex 2205 material has chromium, nickel and molybdenum in the composition. Duplex 2205 studs are cost-effective and lower than other duplex grades and are in high demand.

Compared to 317L stainless steel, duplex steel has excellent resistance to chloride pitting and crevice corrosion. The alloy has excellent corrosion resistance to seawater and most concentrations of sulfuric acid. In addition, it is resistant to sulfide stress corrosion cracking (sour gas environments)

ASTM A479 Duplex Steel UNS S32205 Nuts have good weldability and can be welded by most common welding methods such as shielded metal arc welding, gas tungsten arc welding, plasma arc welding and submerged arc welding. Buy Duplex Stainless Steel Nuts from us at leading market prices.

Duplex describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase.

Alloy 2205 Pipe has a melting point of 1350 degrees C. These pipes have a wall thickness between 0.3mm to 50mm.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength. Grade S31803 stainless steel was modified several times to form UNS S32205, which was recognized in 1996.