Forged Flanges

Incoloy 8Incoloy 800 H is an iron-nickel-chromium alloy with the same basic composition as Incoloy 800 with significantly higher creep rupture strength. Higher strength results from tight control of carbon, aluminum and titanium content and high temperature annealing. The 800H modification is to control carbon (0.05 to 0.10%) and grain size (>ASTM 5) to optimize stress fracture properties. Incoloy 800 H has further modifications to the combined titanium and aluminium content (0.85 to 1.2%) to ensure optimum high temperature performance. The alloy is double certified and combines the properties of both forms.

Inconel 718 is a nickel-based superalloy ideal for applications requiring high strength in the temperature range from cryogenic to 1400¡ãF. Inconel 718 also has excellent tensile and impact strength.

Inconel 718 has good resistance to oxidation and corrosion at temperatures within the effective strength range of the alloy in the atmospheres encountered in jet engine and gas turbine operation.

ASTM B564 UNS N10276 Flanges have a small amount of tungsten added to help resist the growth of grain boundary precipitates that reduce corrosion resistance. Hastelloy C22 flanges have better corrosion resistance than most other grades and are an upgrade to the C276 Hastelloy grade. They are important flanges because of their excellent versatility and resistance to chloride-induced pitting.

Inconel 600 flanges are made from materials containing carbon, manganese, silicon, sulfur, copper, iron, nickel and chromium. This is a nickel-chromium alloy as it contains at least 72% nickel and 14% chromium.

There are different types, such as UNS N06600 butt weld flanges with welded necks, which can be used to hold the pipe in place. Butt weld flanges are more common in larger diameter piping systems.

Nickel has good heat resistance properties on its own, but when alloyed with other elements it acquires many properties, like Inconel 600 flanges. Due to the alloy’s good weldability and high tensile strength over a wide range of temperature conditions.

ASTM B564 UNS N06600 alloy is used in a variety of corrosion resistant applications. Alloy 600’s high nickel content provides resistance to reducing environments, while the material’s chromium content provides resistance to weaker oxidizing environments. The material has excellent resistance to chloride stress corrosion cracking.

The high nickel content of Alloy 600 provides good resistance to moderately reducing conditions. The nickel content of the alloy makes the alloy extremely resistant to chloride ion stress corrosion cracking. Alloy 600 is an alloy used in magnesium chloride solutions.

Inconel 601 flanges are made of nichrome. The material grade varies with the composition ratio. The composition of grade 601 is 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron.

Inconel 625 has high corrosion and oxidation resistance, high strength and toughness, and excellent fatigue strength. This non-magnetic nickel-based alloy also offers an extremely wide operating temperature range – from cryogenics to 2,000¡ãF (1,093¡ãC).

Excellent corrosion resistance to a wide range of corrosive media. Alloy 625 is normally supplied in the annealed condition for wet corrosion applications and is T¨¹V certified for use in pressure vessels with a temperature range of -196¡ãC to 450¡ãC.

Inconel 625 flanges are made from a corrosion-resistant, high-strength nickel-chromium alloy with a composition of 58% nickel and 20% chromium, as well as carbon, manganese, silicon, sulfur, copper and iron.

Nickel-chromium-molybdenum alloy Hastelloy is used to make Hastelloy C276 flanges. Nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus make up the composition. The melting point of Hastelloy C276 flange is 1370 degrees Celsius.

Hastelloy is a super alloy designed to produce high strength flanges. Hastelloy B2 flanges are solid solution strengthened nickel and molybdenum alloys that exhibit increased resistance to reducing and corrosive media in harsh environments. Hastelloy flanges have excellent resistance to pitting and stress corrosion cracking in pure and non-oxidizing acids. Hastelloy B3 flanges are a slight upgrade to this grade, this flange type exhibits higher thermal stability than B2 grade flanges.

Hastelloy C276 flanges are one of the most commonly used flange types in the Hastelloy family. These flanges are designed for use with high performance alloys, Alloy C276 flanges have excellent resistance to wet chloride gas, chlorine dioxide solutions and hypochlorite.

Both Nickel 200 and Nickel 201 are commercially pure nickel, which means that nickel is their main base metal, making up about 99.6% of the total alloy. Chemically, the main difference between Nickel 200 and 201 is that Nickel 201 is a low carbon version with a carbon content of up to 0.02 of the total alloy. Compared to Nickel 200, where the carbon content is approximately 0.15 maximum of the total alloy.

ASTM B564 UNS N06022 Flange has a design density of 8.69g/cm3. They are widely used in pharmaceutical, offshore drilling systems, power generation, natural gas processing, chemical and other industries

Hastelloy C22 Welded Flanges are widely used in high pressure systems. These flanges can be identified by the long protruding neck which provides support to the pipe when pressure or temperature rises. All our products are manufactured according to international and national standards.

Due to the higher chromium content, Hastelloy C22 alloy flanges (UNS N06022) have better overall corrosion resistance in oxidation corrosion than C-276 and Inconel 625 alloys. More specifically, C22 plate flanges provide better protection when used in certain saturated wet chlorine environments.

Additionally, its high chromium content provides C22 flanges with better resistance to oxidative media than C276. This makes it excellent resistance to chloride-induced pitting, although in most cases it is due to its availability. Hastelloy C22 blind flanges also have excellent resistance to pitting and crevice corrosion and stress corrosion cracking. The use of C22 flanges should be limited to temperatures below 1250¡ãF.

These flanges are resistant to localized corrosion, have good metallurgical stability, and do not brief during heating or welding. These WNR 2.4602 flanges are used as part of chemical processing, pollution control, paper and pulp production, marine seawater, waste treatment applications and more.

Alloy C22 flanges are particularly parallel to Alloy C276 and are also an excellent corrosion and heat resistant product. At the same time, the nickel-chromium-molybdenum material it forms also contains tungsten, which enhances a complete erosion barrier compared to most different parallel products. Our UNS N06022 flanges prevent push erosion damage, hole consumption and set-up. These are available to our profitable customers at very affordable prices and come in a range of spans, divider thicknesses and sizes.

ASTM B564 Hastelloy B2 butt weld flanges are generally used to stop the opening of one end of a flanged pipe, pressure valve or orifice valve. ASTM B564 UNS N10276 Hastelloy C276 flanges belong to the Ni-Cr-Mo series for industrial applications, ASTM B564 N10276 pipe flanges were introduced in the mid-1960s.

Hastelloy C276 butt weld flanges are also known as super alloys. N10276 material flanges are suitable for connecting pipes in extremely corrosive environments and high temperature corrosive environments. Ni-Cr-Mo Alloy C276 Hastelloy Flanges are the most versatile Hastelloy flange slips that resist corrosion under reducing conditions and produce chromium from molybdenum.

Hastelloy B2 flanges are primarily used for excellent resistance to reducing environments such as hydrogen chloride gas, sulfuric acid, acetic acid and phosphoric acid. Like other Hastelloys, B2 flanges can be used in the as-welded condition because they resist the formation of grain boundary carbide deposits in the weld heat-affected zone. B2 flanges are not recommended for use between 1000¡ãF and 1600¡ãF due to reduced ductility.

UNS N010665 Hastelloy B2 Orifice Flanges, we ensure that our W.Nr. 2.4617 flanges, in addition to being easy to weld and machine, resist the effects of a range of acid attacks while maintaining their tensile and yield strengths.

Hastelloy B2 Flange is basically an alloy consisting mainly of nickel and molybdenum. In addition to acids such as sulphuric, acetic and phosphoric acid, the B2 grade flanges are also significantly more resistant to reducing environments such as hydrogen chloride gas. Molybdenum is the main alloying element in Hastelloy B2 lap flanges, which in turn provides excellent corrosion resistance, especially in reducing environments.

Hastelloy B2/B3 flanges also have excellent resistance to localized corrosion such as pitting, corrosion and stress-related corrosion cracking. In addition to its amazing corrosion resistance, Hastelloy B3 butt weld flanges are thermally stable better than their Hastelloy B-2 counterparts.

Hastelloy C22 is a omnipotent of nickel, chromium and molybdenum mixed alloy, with better corrosion resistance performance than other alloys, for example, Hastelloy C276 alloy, C4 alloy and 625 alloy. Hastelloy C22 have a good resistance performance to pitting, crevice corrosion and stress corrosion cracking, have excellent inoxidability water medium performance, including the wet-chlorine, nitric acid or oxidizing acid mixed acid with chloride ion.