Forged Semi Finished Flanges A182 F5 Allloy WN Flanges easy installation

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

There are different types of fittings such as bends, tees, crosses, reducers, caps and the WPHY 52 Elbow.In sour service wells, when hydrogen sulphide gas reacts with water, the hydrogen molecule gets deposited either on the pipes or fittings.

Alloy steel is a steel alloyed by adding a variety of elements with a total amount between 1.0% and 50% in order to improve its mechanical properties. Alloy steels are divided into two categories: low alloy steels and high alloy steels. The distinction between the two is debatable. Smith and Hashemi defined the difference as 4.0%, while Degarmo et al. defined the difference as 8.0%. Most commonly, the phrase “alloy steel” refers to low alloy steel.

Pipe to ASTM A335 P11 can be cold drawn or hot rolled. Each tube shall be reheated for heat treatment – fully or isothermally annealed, normalized and tempered at a temperature not lower than 1200¡ãF (650¡ãC). Each pipe length shall be hydrostatically tested to ASTM A335 P11, along with dimensional inspection and visual inspection. Longitudinal or transverse tensile tests, flattening tests or bending tests are carried out for each heat.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P129

INCONEL? alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423¡ã to 1300¡ãF. Inconel alloys are resistant to oxidation and have the ability to maintain its structural integrity in high temperature atmospheres.

ASTM A182 Alloy Steel Blind Flanges is a solid disk used to block off a pipeline or to create a stop. It has mounting holes around the perimeter and the gasket sealing rings are machined into the mating surface.

A335 gr P22 seamless pipe is easy to install as the dimensions are very accurate. It can be used with other a335 gr P22 alloy pipe types and fittings.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.40

A387 Chrome Molybdenum Steel Sheet Uses & Applications Due to the key properties of the alloy, chrome molybdenum steel sheet is popular in onshore and offshore production facilities in the oil and gas industry. It is also widely used in the energy industry as a key component in power plants. It can be found in boilers and pressure vessels, heat exchangers, flanges, fittings and valves, pipes and pipe supports.

ASTM A335 Alloy Steel Seamless Pipe Alloy steel contains significant amounts of elements other than carbon, such as chromium, silicon, nickel, manganese, molybdenum, tungsten, vanadium, and limited amounts of other generally accepted elements such as sulfur, manganese, silicon, and phosphorus . These alloying elements are usually added to increase the hardness, strength and chemical resistance of the final product.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P117

ASTM A320 Class L7 fasteners are manufactured using high strength materials ideal for the manufacture of fastener product bolts, studs and bolts that can be used in a wide range of high temperatures in bolting applications.

Its greatest advantage is that it can be assembled without welding, which explains its use in low-pressure service at ordinary atmospheric temperatures and in highly explosive areas where welding creates a hazard.

ASTM A194 2H Heavy Duty Hex Bolts are the core product and are in stock. HT PIPE is a leading supplier of ASTM A194 2H Heavy Duty Hex Nuts. These are heavy duty hex nut type bolts as directed by ASTM A-193 specification.

ASTM A335 Grade P11 is also commonly known as ASME SA335 Grade P11 Pipes, it is a seamless ferritic alloy-steel pipe that mainly has high-temperature applications. The UNS designation for this grade P11 is K11597.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Alloy steel F12 square bars can withstand very high temperatures with minimal product aging even after thousands of operating hours,

ASTM 182 is use in pressure systems, Included are flanges, fittings and similar parts to specified dimensions or to dimensional standards, such as the ASME specifications. 182 F5 Cl2 Alloy Steel Flanges are well suited to not only high temperature but also high pressure or a combination of both these applications.

Flanges that can withstand harsh environments are critical when transferring high temperature or corrosive media from one process to the next through chrome alloy tubing.

It must be slid into the pipe before welding. In this case, it’s a double weld on both sides (i.e. inside and outside), so it provides durability that helps avoid leaks.

The alloy content of pipes that make up low alloy steel is less than 5%. High alloy steels, on the other hand, have an alloy content ranging from 5% to about 50%. Similar to most alloys, the working pressure capacity of alloy steel seamless pipe is about 20% higher than that of welded pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P127

B7 threaded studs and short head bolts are readily available in the market. B7 grade bolts are often used for pipe flange connections. These bolts are usually sold in a normal bare metal finish, but are usually hot-dip galvanized, galvanized, Xylan coated, PTFE coated, or otherwise treated with a corrosion resistant coating.

Impact strength as well as high surface smoothness are the result of round bar forging of alloy steel DIN 1.7335. Once the materials are forged, they are allowed to cool to the temperature specified by the specification ASTM A 182.

Alloy Steel Flanges are made in different steel alloys. The flanges vary in dimensions and types. There are ? inches through 48 inches of nominal diameter sizes of flanges.

In order to strengthen chromium alloy flanges, elements such as copper, titanium, vanadium and niobium are added to the alloy.

These are available in raised face or flat face configurations. These are used in piping industry, mechanical, chemical and many other sectors.

Our Alloy Steel ASTM A182 F5 Weld-neck Flanges are supplied to aid industrial, high pressure services like condensers, boilers, evaporators, heat exchangers, etc. Alloy steel F5 A182 flanges is also available in the form of lap joint flanges, plate flanges, threaded flanges, reducing flanges and many more. These flanges are widely used in power generation industry, gas processing industry, pharmaceutical industry, heat exchangers industry, sea water equipment industry, oil drilling companies and many more.

High alloyed types of steel are favored in the plumbing industry for use in extreme conditions, be it hot or cold, or subjected to rough service. This is because a combination of chemistry and proper heat treatment can result in a strong and flexible pipe that can withstand blows. Alloy pipes are often favored by the oil and gas and power generation industries due to their toughness.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.43

We have many years of experience in manufacturing ASME SA335 grade P9 alloy seamless steel pipe and provide high quality, low cost but best service.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

ASTM A193 Grade B7 specification covers requirements for high tensile alloy steel bolting material for use in high temperature or high-pressure service and other special purpose applications.

We are Leading Manufacturers of Alloy Steel ASTM A182 F22 Flange & have huge stock of Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500# & Class 2500.

Its tensile strength is 380 Mpa, while its yield strength is 585 Mpa at 0.2% Offset. The elongation of astm a182 gr f9 is 20 %.

Due to the chemical composition of Molybdenum (Mo) and Chromium (Cr), A335 is often referred to as Chromium Molybdenum Tube. Molybdenum increases the strength of the steel as well as the elastic limit, wear resistance, impact quality and hardenability. Molybdenum increases resistance to softening, inhibits grain growth, and makes chromium steel less susceptible to embrittlement. Molybdenum is the most effective single additive for improving high temperature creep strength. It also enhances the corrosion resistance of the steel and inhibits pitting corrosion. Chromium (or chrome) is the basic component of stainless steel. Any steel with 12% or more chromium is considered stainless steel. Chromium is almost irreplaceable in terms of resistance to oxidation at high temperatures. Chromium increases tensile, yield and hardness at room temperature.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P99