forging carbon weld neck steel reducer flange A694 flange

ASTM Specification A106 covers seamless carbon steel nominal wall pipe for high-temperature service, suitable for bending, flanging and similar forming operations. NPS 1-1/2 and under may be either hot finished or cold drawn. NPS 2 and larger shall be hot finished unless otherwise specified. Surface finish standards are outlined in the specification.

It covers steel fittings of seamless and welded types. Steel Pipe fittings are applied in pressure pipelines and in pressure vessel fabrications.

ASTM A105 fittings possess a minimum tensile strength of 485mpa with a minimum yield strength of 250mpa. These fitting can be elongated by 22% and possess a hardness of 137 to 187 HBW. Our company is an ASTM A105 Forged Fittings manufacturer in India who make use of top-of-the-line technology to produce the best components in the industry. These coupling can be half or fully coupled. The Full Coupling A105 is employed in connecting small bore pipes. It is utilized in connecting a pipe to another pipe or to a swage or nipple. A105 Half Coupling is utilized for smaller bore branching from a large pipe bore. These couplings can be threaded and welded. A105 Threaded Coupling is preferred in applications where stress on the system is less. We are exporter and manufacturer of Carbon Steel A105 grade for forged pipe fittings.

For the seamless steel pipe fittings refers to the fittings raw material from the seamless steel pipes and tubes. Thus the welded steel pipe fittings covers the fittings raw material from welded steel pipes.

The increase of carbon element content makes the steel sturdier and stiffer after the heat treatment, and it also becomes less ductile. Without the heat treatment, higher carbon will reduce weldability.

This is called as the “center to face” distance and is equivalent to the radius through which the ASTM A234 gr WPB elbow is bent.

SA350 LF2 flanges are mostly used to connect pipes, valves and pumps. It has several grades and classes. These are corrosion resistance and are used in many other industrial sectors. They are made to specified dimensions, or to dimensional standards, such as the ASME and API specifications. The material composition includes carbon, silicon, manganese, phosphorus, sulfur, molybdenum, copper, chromium, nickel, vanadium and niobium.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Flanges made of carbon and low alloy steels can be found in the standard ASTM A350 specification.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it.

We offer wide range of A105 Carbon Steel Flange, Carbon A105 Blind Flanges, CS A105 Pipe Flanges, Carbon Steel A105 Threaded Bars, Carbon Steel A105 Threaded Flanges in India. These Carbon Steel A105 Weld Neck Flanges widely used in various application industries.

HT PIPE provides high quality carbon steel flanges for boiler and pressure vessel manufacturing.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.

In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.

Carbon steel forged fittings and flanges are prevalent and common used in industries, the representative material grade is ASTM A105 and A350 LF2/LF3.

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas. Typical carbon steel pipe material grades in API 5L Grade B, X42 to X70, ASTM A106 B, ASTM A53 B, ASTM A252 Grade 3 and ASTM A333 Grade 6 etc.Mineral and slurry pipe is for the line pipe that applied in mining industries. A slurry pipeline is designated to transmit ores (Iron, Coal materials), or the industry mining waste, we called the pipeline as taillings. And generally these steel pipes connected in a long distances. Above materials mixed with water, we call slurry. People will use pumps to transport to the final destination then water will be filtered out. Since slurry contained different materials some with abrasive properties, so the pipe could be coated with 3PE, FBE layers to against from corrosion.
Both carbon steel pipe in seamless or welded could be used for the transmission of the slurry. So there is a wide range of material and standards available options to suit for the special working conditions.

ASTM A350 LF2 flanges are used in intensive application industries such as light and heavy chemical manufacturing plants.

Manufacturer of a wide range of products which include astm a105n flanges, carbon steel threaded flange, carbon steel astm a105 slip on flange, plate flanges carbon steel, astm a105 flange and mild steel flanges.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

Alloy steels contain varying proportions of alloying elements (such as manganese, silicon, nickel, titanium, copper, chromium, and aluminum) to control steel properties such as hardenability, corrosion resistance, strength, formability, weldability, or ductility . The differences are somewhat uniform, but for the sake of distinction, all alloy steels over 8% by weight, not carbon and alloys, are considered high-alloy steels. Alloy steel is harder, more durable, and more resistant to corrosion. Alloy steels with moderate to high carbon content are difficult to weld. However, if the carbon content is reduced to 1% to 3%, this alloy metal can achieve higher formability and weldability, thereby increasing strength.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.

a105 lap joint flange slide directly over the pipe and are most commonly used with stub end fittings.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Although ASME SA 694 F60 flanges are used in a variety of applications, ASTM A694 F60 flanges are overwhelmingly used in high pressure piping systems for conveying oil, gas and petrochemical aggregates.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.