Good Quality 28 Inch Slip Blind 150 Lj Ff Forged Drawing A105 Backing Ring Flange

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Alloy steel is a steel alloyed by adding a variety of elements with a total amount between 1.0% and 50% in order to improve its mechanical properties. Alloy steels are divided into two categories: low alloy steels and high alloy steels. The distinction between the two is debatable. Smith and Hashemi defined the difference as 4.0%, while Degarmo et al. defined the difference as 8.0%. Most commonly, the phrase “alloy steel” refers to low alloy steel.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

WPHY 52 Pipe fittings are manufactured as per MSS SP 75 shall be furnished in the heat treated condition.We offer a wide assortment of ASTM A860 WPHY 52 Fittings that cater to the prerequisite of different industries such as engineering, chemical, refineries, machine apparatuses, and numerous others.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

Another industry that uses this alloy is the food and beverage industry, which uses acetic acid as a preservative. Acetic acid is an organic acid that is corrosive to carbon steel.

SA312 tp304 pipe is proven to be a versatile material that can be used in a variety of critical industries. Alloy grade 304 stainless steel 304 pipe is popular because of its good corrosion resistance in a variety of media.

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).

F11 flanges are made of high-quality raw materials to perform well even in the harshest environments. This weight table is also available and products are manufactured based on it. Alloy steel F11 flange specification, the face type starts from flat face, raised face, ring joint, etc. These are used in applications where little resistance is required and general corrosion resistance is required.

17-4 PH is a martensitic precipitation hardening stainless steel with exceptionally high strength and hardness as well as excellent corrosion resistance. 17-4 PH has good processing characteristics and can be age hardened by a one-step low temperature treatment. 17-4 PH is a multipurpose material widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries.

The high creep resistance and yield strength of Inconel 625 elbow make this superalloy a good choice for tubes, piping, and plant equipment that require welding.

321 stainless steel, also known as UNS S32100 and Grade 321, is primarily comprised of 17% to 19% chromium, 12% nickel, .25% to 1% silicon, 2% maximum manganese, traces of phosphorus and sulfur, 5 x (c + n) .70% titanium, with the balance being iron. With regards to corrosion resistance, 321 Stainless Steel is equivalent to Grade 304 in the annealed condition and is superior if the application involves service in the 797¡ã to 1652¡ã F range. 321 Stainless Steel combines high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
Stainless Steel 321 / 321H Pipe Fittings are used in filtration, refrigeration, oil, gas, petrochemical and in offshore oil drilling industries. The material has chromium, nickel, titanium and other elements along with carbon. The 321H has higher carbon than the other versions. There are different types of fittings such as the 321/321H Stainless Steel Buttweld Fittings which are most commonly used but there are also the seamless fittings. The Stainless Steel UNS S32100 Pipe Elbow is a fitting type that is used in high temperature applications to change direction of flow.

Super Duplex Steel Pipes and Tubes are available in various dimensions, shapes like square, rectangle, and so on and enormous sizes. We are offering the standard quality of products of our customers. Our Product is offering excellent corrosion resistance and remarkable dimensional accuracy.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Monel 400 es una aleacion de niquel-cobre con excelente resistencia a la corrosion en una variedad de medios.

Alloy 304 Studs (Din 1.4301 Studs) Stainless Steel UNS S30400 Studs are commonly used in the brewing industry such as pipes, fermenters, yeast trays, railway vehicles and warehouses. Due to the high work hardening rate of these alloy 304 studs, intermediate annealing may be required to successfully manufacture the part. These annealed grade 304 studs have better heat and corrosion resistance than Type 301 and 302 stainless steels, they are not very conductive or thermally conductive, and are non-magnetic.

2205 is the standard duplex grade and is more economical than most other duplex grades.

Alloy 400 is a solid solution of gold that can only be hardened by cold work.

Duplex 2507 has high resistance to chloride stress corrosion cracking, high Strength, and superior resistance to chloride pitting and crevice corrosion.

Monel 400 has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The composition is shown in the Table below.

In addition to being reliable, it has a high tolerance capacity. Our Stainless Steel 304 Forged Fittings are produced using modern technology and high-quality raw materials that assure compliance with international standards.

Flanges are used to connect 2 pipes or tubes. They are made up of different materials depending upon the end use.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Stainless steel 304 pipe fittings contain both chromium 18% – 20% and nickel 8% – 10.5%. It is an austenitic stainless steel and is less electrically and thermally conductive than carbon steel. It is a component that helps in change the direction of the flow such as tees and pipe bends.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Inconel 625 round bar is a nickel-chromium-molybdenum-based alloy. This makes it very good at resisting non-oxidizing environments. They are widely used in the manufacturing sector of the economy.

ASTM A403 WP304 pipe fittings mean the pipe fittings which material is Wrought Austenitic Stainless grade A403 WP304,they are used for the pressure piping systems of moderate and high temperature services.

SS 304 Threaded Flanges

?The?ASTM A182 F304 Flanges?could be cleaned easily with a mild detergent. Despite undergoing repeated cleaning processes, these flanges won¡¯t wear away, an ability it exhibits due it its good wear resistance properties. Moreover, since grade 304 is an alloy that can be easily formed into various shapes, it is easily manufactured into any type of?ASME SA182 F304 Pipe Flange?such as a weld neck flange or an?Inox 304 Slip On Flange.

ASTM A105 Carbon Steel Round Bars are available in a variety of sizes, standards, names and custom lengths according to customer requirements.

La tuberia 254 SMO a menudo se usa como reemplazo de componentes criticos de estructuras grandes donde el tipo 316L o 317L falla debido a picaduras o agrietamiento por corrosion bajo tension de cloruro, la tuberia 254 SMO puede soportar los mismos entornos corrosivos.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.