half or 1 inch austenitic 904L stainless steel pipe fitting tee

This manufacturing method allows us to supply a superior quality fitting regardless of the application. Suitable for use in applications ranging from food and beverage, dairy, and pharmaceutical to marine and automotive.

Grade WPB is the most common material for medium and high temperature pipelines in these standards. W stands for “weldable,” P for “pressure,” B for “grade b,” and Y for “yield strength.”

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Duplex Steel S31803 Reducer Fittings are resistant to chloride environments and sulfide stress corrosion. Meanwhile, these Duplex Steel S31803 Cross Pipe Fittings are also available to our customers in different sizes and shapes. Duplex steel S31803 bent butt welded pipe fittings generally perform well in environments that cause premature failure of austenitic grades. Although duplex steel S31803 short end butt welded pipe fittings have good high temperature oxidation resistance, this grade – like other duplex stainless steels – can embrittle even for short periods of time if held at temperatures above 300 degrees Celsius.

Sanitary elbows are a crucial link in the chain of fluid systems everywhere. While these types of equipment are highly specialized in nature, their presence in industrial, commercial, and even residential spaces is more ubiquitous than you might think.

Copper-nickel or copper-nickel elbows are moderately strong and commonly found in marine saltwater applications.

Stainless steel 304 elbows are made of high grade stainless steel to help withstand fluid pressures at moderate and high temperatures. We are one of the top manufacturers of ASTM A403 WP 304 Stainless Steel Long Radius Elbows, covering the standard for forged austenitic stainless steel fittings for a variety of pressure applications.

We manufacture Stainless steel 304/ 304L pipe fittings for end-users such as marine engineering, chemical processing, hydro-carbon processing, heat exchangers, valves and pumps. and ship worldwide.

A403 is applicable in various applications like car headers, machinery parts, screws and also food handling equipment. We offer these DIN 1.4301 Stainless Steel Butt Weld Fittings in different forms like Tees, Reducers, Cross, Stub Bends, Elbow and End caps. SS UNS S30400 Butt Weld Pipe Elbow execute excellent forming and welding properties. This type of steel also shows excellent oxidation resistant properties. We develop all our products under international standards in top notch infrastructure facility to attain highest scales of quality.

Hastelloy B2 is a nickel-molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulfuric, acetic and phosphoric acids. Hastelloy B2 provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media. Premature failure may occur if alloy B2 is used where iron or copper is present in a system containing hydrochloric acid.

Seamless Butt Weld Fittings: 1/2¡å ¨C 10¡å, Welded Butt Weld Fittings: 1/2¡å ¨C 48¡å

UNS N06600 Butt Weld Fittings also contain 1% manganese and 0.50% silicon and copper. ASME SB366 Inconel 600 Butt Weld Fittings melt at 2580 degrees Fahrenheit. Inconel 600 fittings have excellent corrosion resistance to pitting and crevice corrosion.

SS UNS S30400 Butt Weld Pipe Elbow execute excellent forming and welding properties.ASTM A403 WP304 Fittings covers the standard for created austenitic stainless steel fittings for pressure piping applications.

These Stainless Steel 304/ 304L Fittings/Fittings feature exceptional quality finishing and pressure for long life, high pressure and zero defects. We manufacture stainless steel 304/ 304L pipe fittings for end users such as marine engineering, chemical processing, hydrocarbon processing, heat exchangers, valves and pumps. And ship worldwide.

The ASTM A420 Grade WPL6 can be seamless, welded or fabricated. There are different types of the fittings such as the unions, plugs, couplings, bends, caps and elbows.

Butt weld fittings connect with pipe to deliver air, water, natural gas, and oil in plumbing applications and food and dairy processing. Butt weld (BW) fittings form pipe joints with strength, fatigue, corrosion resistance, and temperature compliance.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Inconel alloy butt welded joints are used in all steel industries due to their high quality raw materials and design. Not sure, but mostly the steel and metals industries buy products so that butt welding can take the pressure. It is mainly used in the petrochemical industry because butt welding performs well in terms of processing temperatures, but also the automotive and refining industries are major users.

Our Stainless Steel 904L Buttweld Fittings (WNR 1.4539) are used in Power plants using fossil or nuclear fuels, and also in geothermal energy for harnessing heat from the earth. SS 904L Welded Tube Fittings are used for the cold chain to keep produce fresh, drinks, and frozen foods at a set temperature. SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings are used in industries such as Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry.

The function and material of sanitary pipe fittings are basically the same as those of industrial stainless steel pipe fittings. However, it is used in the hygiene and food industry, and can be divided into welding type, screw type and clamp type according to the connection method.

The alloy has great mechanical properties at subzero temperatures.For catering to the needs of our customers better, it is essential that we manufacture Monel Pipe Fittings in different types, with each one serving some specific purpose.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Incoloy is a group of superalloys with good electrical resistance and tolerances. Incoloy 800 is an alloy of iron, nickel and chromium. These alloys are extremely resistant to corrosion and oxidation. They are not easily deformed or broken down under extreme pressure and heat. The alloy has medium strength and Incoloy 800 material has excellent mechanical properties.

The Inconel 600 Pipe Fittings are made with high concentrations of chromium, nickel, and molybdenum. This composition of chemicals gives it excellent resistance against all forms of corrosion and oxidation.

INCOLOY Alloy 800 (UNS N08800/W. Nr. 1.4876) is a widely used material for the manufacture of equipment requiring corrosion resistance, heat resistance, strength and stability, operating temperatures up to 1500¡ãF (816¡ãC) ).

Hastelloy C276 alloy, UNS N10276, 2.4819, is the most widely used and versatile corrosion resistant nickel alloy.

A high nickel alloy with the addition of substantial amounts of copper to give the alloy excellent resistance to sodium chloride solutions, including brine and seawater. Therefore, UNS N04400 Alloy 400 Forged Fittings and Socket Weld Elbows can be used as part of an offshore piping system that may require a change of direction.

ASTM A403/ A182/ A240 and ANSI B16.9/16.28/ B16.25/ MSS SP-43. 316/316L is a nickel-chromium stainless steel alloy to which copper and molybdenum have been added. It is a non-magnetic austenitic stainless steel, so it is especially useful in severely corrosive conditions.