hardware fasteners alloy slip blind flange tapped flanges A182 F12 plate flange

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Alloy Steel F12 slip on Flanges are made up of chromium molybdenum steel alloy and therefore have a high rupture resistance. They are also preferred due to their light weight because of the low carbon and high alloy nature.Alloy Steel ASTM A182 flanges are very simple to install and have a low center because the pipe occasionally trips into the flanges after welding.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

One of the top stocks of ASTM A182 alloy steel F5 flanges for a variety of industrial applications. With a talented team of professionals, we are committed to supplying the highest quality ASTM A182 Alloy Steel F5 Flanges, widely used by customers in suitable applications.

A low alloy steel flanges series mostly consists of approximately 0.5% to 9% of Chromium. And the content of Molybdenum in the alloy steel flanges ranges anywhere between 0.5% to 1% .

The chromium content in the A335 p9 pipe makes it highly resistant to corrosion. Therefore, A335 p9 has excellent high temperature oxidation resistance. In addition to chrome, Astm A335 p9 alloy steel pipe coated with black paint or anti-corrosion oil shows good corrosion resistance. It can also be galvanized with zinc. Galvanizing increases its resistance to atmospheric corrosion.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P147

Production of low alloy steel materials of different specifications. A335 is a specification for seamless ferritic alloy steel pipes. These alloy steel seamless pipes are used for high temperature service. There are also high alloy steel materials. There are different grades in this material specification. There are grades P1, P2 to P91 and P92. The most commonly used grades are p5, p9, p11, p22, p91 and p91.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P136

ASTM A335 Alloy Steel Seamless Pipe Alloy steel contains significant amounts of elements other than carbon, such as chromium, silicon, nickel, manganese, molybdenum, tungsten, vanadium, and limited amounts of other generally accepted elements such as sulfur, manganese, silicon, and phosphorus . These alloying elements are usually added to increase the hardness, strength and chemical resistance of the final product.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P117

ASME SA 335 P91 Alloy Steel Pipe also has some other great features like low maintenance, efficient work, high demands, etc. We offer a range of ASTM A335 P91 alloy steel pipes for a wide range of applications in various industries.

Applications for Alloy Steel A335 P5 EFW Tubing can be seen in petrochemical, oil and gas industrial applications, power plants and other high pressure and high temperature services.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P123

B7 y B7M se trataran termicamente mediante enfriamiento rapido y revenido en un medio liquido. Para los sujetadores B7M, el tratamiento termico final, posiblemente una operacion de templado si se realiza a un minimo de 1150 ¡ãF [620 ¡ãC], debe realizarse despues de todas las operaciones de mecanizado y formacion, incluido el laminado de roscas y cualquier tipo de corte. Preparacion de la superficie que permite realizar pruebas de dureza, evaluacion no destructiva o tension ultrasonica de pernos.

Chrome moly alloy flanges connect pipes, valves, pumps and other equipment, forming a piping system.

A182 alloy steel flanges are not only suitable for high temperature, but also for high pressure or a combination of the two.

ASTM A182 F9 Flanges also have higher corrosion resistance levels. Alloy Steel F9 Threaded Flanges can be susceptible to sensitisation, the formation of grain boundary chromium carbides at temperatures between approximately 900 and 1500 Degree F (425 to 815 Degree C) which can result in intergranular corrosion.

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

Its greatest advantage is that it can be assembled without welding, which explains its use in low-pressure service at ordinary atmospheric temperatures and in highly explosive areas where welding creates a hazard.

ASTM A182 F22 Forging raw material used for the manufacturing process is well-tested and inspected by inspection agencies and quality experts.

These supplied alloy steel F2 A182 bars are manufactured synchronously through set industry specifications using high quality raw materials and leading technology. Regarding the domestic and international quality of the raw materials, we also offer these round bars and bars in custom sizes.

SA12 F11 Flange is made up of by using supreme raw material and they give excellent performance even in toughest environment. The weight chart of this is also available and based on this the product is manufactured.

Alloy Steel Flanges are made in different steel alloys. The flanges vary in dimensions and types. There are ? inches through 48 inches of nominal diameter sizes of flanges.

ASTM A182 F12 alloy steel flanges also contain niobium to prevent sensitization and resulting intergranular corrosion.

ASTM A320 Grade L7 is a material specification for bolts, studs, nuts, and other fasteners designed for high temperature bolting applications. ASTM A320 L7 grades are divided into 4 performance classes, A, B, C, and D, each with different tensile and stress rupture properties. Class 660 fasteners are used to bolt boilers, pressure vessels, pipe flanges and valves for high temperature service.

These Alloy Steel F12 Lap Joint Flanges are made up of in dissimilar grades of standard ranges and meet its terms through national and international standards. Alloy Steel ASTM A182 F12 flanges are exceptionally resistant to corrosion in nature. In the interim, fabricators can cut pipe to length without inconvenience for these ASTM A182 F12 Alloy Steel flanges.

For A335 steel pipe, the addition of molybdenum (“Moly”) increases the strength and elastic limit of the steel, and enhances the wear resistance, impact quality and hardenability of the steel. It also improves softening resistance, makes chrome steel less brittle and prevents pitting corrosion. Chromium is also a key element in stainless steel alloys, preventing oxidation of the steel at high temperatures and improving the corrosion resistance of the steel. It improves the tensile, yield and hardness properties of low alloy pipes at room temperature.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P104

a182 gr f9 alloy steel flanges generally conform to ASTM grade A182. ASTM Class A182 is a specification for rolled or forged alloy flanges for high pressure applications and systems.

B16.11 Forged Fittings, Socket-Welding and Threaded ASTM B366 specification covers Inconel, Monel, Hastelloy and Nickel Alloy Pipe Fittings used in acidic and sea water.

They can also be seamless in nature. The nominal diameter of the seamless fittings ranges from ? inches to 24 inches and the welded fittings range from ? inches to 120 inches in diameter.

We are Leading Manufacturers of Alloy Steel ASTM A182 F22 Flange & have huge stock of Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500# & Class 2500.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

We use state-of-the-art technology to precisely manufacture flanges such as ASTM A182 Class F5 Socket Weld Flanges. Buying an ASME SA182 F5 flange or any other flange from us will guarantee quality, economy and precision.

Alloy steel is divided into two categories: high-alloy steel and low-alloy steel. Low alloy steel forged fittings, on the other hand, contain about 0.05 ¨C 0.25% carbon and up to 2.0% manganese.