Hastelloy B2 pipe bend provides the excellent high-temperature strength

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

It is used in chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment and the recovery of ¡°sour¡± natural gas.

The alloy is forged between 2250/1750oF (1230/955oC) and then soaked at the forging temperature for 30 minutes per inch of billet or ingot section thickness. Forging should begin immediately, the billet is removed from the reheat furnace, a 25/40% reduction helps retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.

The alloy can be used in phosphoric acid and acetic acid and a range of organic acids. Hastelloy B2 alloy is having chloride induced SCC resistance.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Each method has unique benefits and will determine the degree of bending possible and the final shape of the pipe.

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

Hastelloy C22 Spectacle Blind Flanges is also in a wide variety of hazardous waste management technologies where high corrosion ¨C resistance of critical equipment is required for reliability, safety, and cost effectiveness / reduced maintenance.

Hastelloy B2 pipe bend is a nickel-molybdenum alloy particularly suited for equipment handling reducing chemical environments.

Chemical processing plants use high-end, high-precision tubing, such as Ni C276 hot-worked tubing. There are also resistance welded pipes. Hastelloy C276 Alloy EFW Tubing is easy to use. It can be welded without much precipitation. This feature helps the material retain its shape and not corrode even after applying field welding.

The 2.4819 Alloy C276 Flat Plate is typically used in areas with extreme conditions.

Alloy C22 is a nickel-chromium-molybdenum solid solution strengthened super-alloy with a nominal chemical composition of 56% nickel, 22% chromium, and 13% molybdenum, with additions of iron, tungsten, and cobalt.

HASTELLOY C276 is one of the few alloys resistant to wet chloride gas, hypochlorite and chlorine dioxide solutions.

Hastelloy B3 suppliers and Hastelloy B3 manufacturers can be reached out to all over the country.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy DIN NR. 2.4819 Pipe is a nickel based superalloy. Apart from its primary base alloying element, the alloy for Hastelloy C276 Pipe also contains elements molybdenum & chromium, which results in the alloy gaining certain properties.

Hastelloy B3 is molybdenum and nickel alloys family additional member with greater hydrochloric acid resistance at various concentrations and temperatures. It is withstanding formic, sulphuric and phosphoric acid as well as non-oxidizing acids.

The premium composition of molybdenum and nickel content of c276 is used to make nickel steel alloys. It helps resist crevice and pitting corrosion in reducing environments. Chromium, on the other hand, is used to impart resistance to oxidizing media.

Hastelloy C-276 is a very popular alloy for us for the reason that it is highly anticorrosive in a broad range of enveronments. Thunder Threads? stocks an immense inventory of hastelloy c726 bolts and fasteners. Hastelloy C276 Fasteners is a wrought corrosion-resistant alloy that resists the development of grain boundary precipitates that degrade corrosion resistance.

Plates are designed by continuous rolling and casting or, in most instances, steel is processed into a bullet then hot rolled to be shaped in its final plate thickness. Akin to steel plates, rolled ring forgings are forged in the same process ¨C it differs only in terms of rolling directions.
For cups having comparative large thickness and plates having
complicated cross-sectional shapes, plate forging is more useful than billet forging due to due to
comparatively small change in shape.

Strengthening of super alloy Hastelloy B2 pipe bend is performed by solid-solution hardening, work hardening, and precipitation hardening methods.

HASTELLOY C-276 is a nickel-chromium-molybdenum alloy with universal corrosion resistance unmatched by any other alloy. It has outstanding resistance to a wide variety of chemical process environments including ferric and cupric chlorides, hot contaminated mineral acids, solvents, chlorine and chlorine contaminated (both organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride, sea water and brine solutions and hypochlorite and chlorine dioxide solutions. Alloy C276 also resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as-welded condition. It has excellent resistance to pitting and stress corrosion cracking.

Hastelloy X fasteners, also known as UNS N06002 fasteners, have excellent corrosion resistance and high temperature strength. It is very resistant to stress corrosion cracking but has excellent ductility when subjected to 16,00 hours of torture at temperatures up to 1,600F. It is also suitable for furnaces, heaters and many high temperature applications because it is weldable, heat treatable and relatively easy to machine. That’s why we think Hastelloy X fasteners basically offer the best of both worlds – corrosion and heat resistance.

These Hastelloy B2 Weld Neck Flanges should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Hastelloy G30 is resistant to grain precipitation in high temperature regions. Hastelloy G30 fasteners exhibit physical properties such as thermal conductivity, elongation, and elastic modulus. Hastelloy G30 has properties such as yield strength and tensile strength. Our company supplies these fasteners to oil and gas, refineries, fertilizers, heat exchangers. These fasteners are also used in water treatment, sugar, dairy and food processing. It also shows density, area reduction, and coefficient of linear thermal expansion. Our Hastelloy G30 fasteners are highly resistant to hydrochloric and nitric acids. The alloy has superior resistance to industrial phosphoric acid. Hastelloy G30 fasteners perform well in corrosive environments.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The high molybdenum content imparts resistance to localized corrosion such as pitting.

C22 is typically provided in the annealed condition with a minimum yield strength of 45 ksi. However, C22 can be cold worked to higher strength levels.

Hastelloy offer very good resistance to strong reducing and moderately oxidizing corrosive acids, as well excellent stress corrosion cracking resistance and resistance to localized attack.

Hastelloy C22, also known as Alloy C22, is a general purpose austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. High chromium content provides good oxidation resistance, while molybdenum and tungsten content provides good reduction resistance. Hastelloy C22 alloy also has excellent resistance to oxidizing aqueous media, including wet chlorine and nitric acid-containing mixtures or oxidizing acids containing chloride ions.