Hastelloy B3 2.4600 bolt stud bolt DIN976 thread rod supplier

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Alloy C22 is a nickel-chromium-molybdenum solid solution strengthened super-alloy with a nominal chemical composition of 56% nickel, 22% chromium, and 13% molybdenum, with additions of iron, tungsten, and cobalt.

Hastelloy C-22 (UNS N06022) pipe bends and fittings in stock, allowing for a quick turnaround. Hastelloy C-22 has excellent resistance to aggressive oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

The high content of chromium offers good resistance to oxidizing media while the molybdenum and tungsten content in the Hastelloy B3 Pipe Flanges provides the alloy with good resistance to corrosion in reducing media.

B2 has significantly lower carbon, silicon and iron compared to its¡¯ predecessor, Alloy B (UNS N10001), making the alloy less susceptible to decreased corrosion resistance in the weld zone, in the as-welded condition.

The ASTM B622 Hastelloy B2 Seamless Pipe especially is known to exhibit excellent resistance to corrosion in aggressive reducing media such as hydrochloric acid.

Hastelloy C22, also known as alloy C22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking.

Although Alloy C276 plate has a higher rate of work hardening compared to its austenitic counterpart, in-process annealing may be required if nickel alloy C276 plate is to be work hardened to a higher degree. Solution annealing may be required if the deformation of the nickel C276 strip exceeds 15%.

The flange is second most used joining method after welding. Flanges are used when joints need dismantling. It provides flexbility for maintenance. Flange connects the pipe with various equiment and valves. Breakup flanges are adde din the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrelated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls ae required in the selection and application of all these elements to attain a joint, which has acceotable leak tightness.

The Hastelloy UNS N10665 Pipe Flanges come under the ANSI, ASTM, DIN and other international standards with various dimensions and pressure classes.

Alloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids.

Alloy B-2 has poor corrosion resistance to oxidizing environments, therefore, it is not recommended for use in oxidizing media or in the presence of iron or copper salts, which may cause rapid premature corrosion failure.

Alloy C276 Forged Flange Hastelloy C276 Flanges are made up of the nickel chromium molybdenum alloy that is called hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus in it. The Hastelloy C276 Flanges have high melting point of 1370 degrees Celsius. This high melting point allows for higher operating temperatures of the flanges. The material also has 790MPa minimum tensile strength and 355MPa minimum yield strength.

Hastelloy C-276 is easy to form, ductile, it is easy to weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions.

Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C-276 is one of the most universally corrosion resistant alloys available today. It is used in a variety of environments ranging from moderately oxidizing to strong reducing conditions. Alloy C-276 has exceptional resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions.

Hastelloy C-276 also has excellent resistance to pitting corrosion, stress corrosion cracking and oxidizing atmospheres, as well as excellent resistance to many different chemical environments.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Another feature of HASTELLOY-X fasteners is their excellent forming and welding characteristics. It can be forged and can be cold worked due to its good ductility. Common applications for Hastelloy x include use in aircraft furnaces and chemical process components.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Hastelloy UNS N10276 cold drawn bar has excellent resistance in a variety of chemical process environments. For example, Hastelloy C276 UNS N10276 square bar is resistant to corrosion in a variety of media, including strong oxidants (such as ferric chloride and cupric chloride), hot fouling media (may be organic or inorganic), chlorine, acetic anhydride , formic acid and acetic acid, as well as good tolerance to seawater and saline solutions.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

Alloy X pipe bend is equally suitable for use in jet engine tailpipes, afterburner components, turbine blades, nozzle vanes, cabin heaters, and other aircraft parts.

Hastelloy B2 Flanges come under the ASTM B564 specification with sizes ranging from ? inches to 60 inches under different standards.

Hastelloy C22, also known as Alloy C22, is a general-purpose austenitic grade alloy. The primary alloy materials used in Hastelloy C22 fasteners include metals such as nickel, chromium, molybdenum and tungsten. The main characteristic or characteristic of Hastelloy WERKSTOFF NR. 2.4602 Bolts are their enhanced resistance to pitting, crevice corrosion, and stress-related corrosion cracking.

Hastelloy C276 material is designed with good mechanical properties. They have a minimum tensile strength of 601Mpa and a minimum yield strength of 204Mpa. This material makes the alloy easy to machine and elongate.

The low carbon content in the 2.4819 alloy C276 tube minimizes carbide precipitation. Carbide precipitation is a phenomenon that occurs during welding of various alloy grades.

Hastelloy C-276 is a very popular alloy for us because of its high corrosion resistance in a wide range of environments. It has excellent resistance to oxidizing aqueous media, including wet chlorine and mixtures of oxidizing acids containing nitric or chloride ions.

Nickel- and cobalt-based corrosion-, temperature- and wear-resistant alloys, such as Hastelloy B2, are classified as moderate to difficult when machined, but it should be emphasized that these alloys can be produced at satisfactory speeds using conventional production methods processing. During machining, these alloys harden rapidly, generate high heat during cutting, weld to the cutting tool surface, and provide high resistance to metal removal due to their high shear strength.

Hastelloy B3 fasteners offer the same excellent resistance to hydrochloric acid and other strong reducing chemicals as other B alloys, including B2, but with significantly enhanced thermal stability and easier fabrication. In addition, B3 fasteners are highly resistant to attack from cut lines and heat affected zones. Like B2 alloys, B3 fasteners are not recommended for use in the presence of iron or copper salts that can cause rapid corrosion failure.

Hastelloy B3 studs are suitable for all applications that previously required the use of Hastelloy B2 alloy. Due to the enhanced thermal stability of Hastelloy B3 square bolts, the problems associated with manufacturing Hastelloy B2 parts are reduced.