Hastelloy B3 pipe and tube at all concentrations and temperatures

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C276 Sheets is a solid-solution-strengthened, nickel-molybdenum-chromium alloy with a small amount of tungsten, which exhibits excellent corrosion resistance in an assortment of harsh environments.

Hastelloy C22 machined gaskets also have the best resistance to environments that encounter reducing and oxidizing conditions in the process stream. Hastelloy C22 round washers can be welded, forged, hot upset and impact extruded. Typical chemical process industry (CPI) applications for Hastelloy C22 punch gaskets include reactors, heat exchangers and columns. Hastelloy C22 flat washers have excellent resistance to pitting corrosion, stress corrosion cracking, tool marks and weld heat affected zone erosion.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers.

Modern processing systems are often a complex network of turns, elevation changes, fittings, and more.

C-276 alloy has excellent resistance to pitting and to stress-corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

Hastelloy B3 has excellent resistance to hydrochloric acid at all concentrations and temperatures. In addition, it greatly improves structural stability compared to previous B-type alloys, reducing concerns during welding, fabrication and service.

Hastelloy C276 sheet and plate in wear resistant stainless steel. It provides excellent resistance to stress corrosion cracking in very high temperature environments; its high tensile strength provides extreme thermal stability.

Although there are several variations of the Hastelloy nickel alloy, Hastelloy C-276 is by far the most widely used.

Hastelloy C-276 pipe fittings refer to factory-made wrought nickel alloy fittings manufactured to ASTM B366 UNS N10276. It can be designated as CRHC276(corrosion resistant fittings) or WPHC276(ASME pressure fittings). The fittings can be manufactured from pipe or tube of ASTM B619, B622, B626 UNS N10276, plate, sheet or strip of ASTM B575 UNS N10276, forging or bar of ASTM B564, B462, B472, B574 Gr. N10276. The Hastelloy C-276 fittings are mainly furnished in 3 connection types: butt welding, threaded, socket welding, covering a variety of standard specifications.
Since Alloy C-276 contains a high amount of nickel in its chemical composition, the metal is very ductile. Therefore forming it into various shaped Hastelloy C276 Pipe Fittings becomes very simple. Yet, this is not the only benefit offered by this alloy. Like many nickel containing alloys, the strength and corrosion resistance properties of this alloy make it one of the most sought after ones by Hastelloy Fittings Suppliers. The metal is capable of exhibiting superior resistance to pitting. Unlike highly ductile materials that tend to exhibit failure against stress corrosion cracking, on the application of a tensile load, the Alloy C276 Pipe Fittings are able to withstand such levels of stress.

Hastelloy B3 Lap Joint Flanges has a special chemistry designed to achieve a level of thermal stability greatly superior to that of its predecessors, e.g. B2 alloy.

Cold bending methods often rely on sheer physical force to help bring the pipe to its final shape while hot bending methods use careful heating to reduce the force required.

These flanges demonstrate outstanding toughness and hardness. Thus it exhibits superior ductility after prolonged exposure at a temperature of 650, 760, 870 degree C.

Alloy C276 plate is a high strength grade designed to be thicker than 6mm. The panels have a minimum tensile strength of 601mpa and a minimum yield strength of 204.8mpa. C276 composite panels are made by bonding two or metals in place. Meanwhile, Alloy C276 is resistant to oxidation at 1800¡ãF in the open air. However, alloy C276 is generally not recommended for high temperature service. The high molybdenum content makes alloy C276 prone to catastrophic oxidation under stagnant conditions, such as under solid deposits.

Hastelloy X Bolts have been widely used in combustion zone components of turbine engines such as transition ducts, combustion chambers, booms and flame holders, as well as afterburners, exhaust pipes and cabin heaters. This alloy is recommended for industrial furnace applications due to its unusual resistance to oxidation, reduction and neutral atmosphere.

Machining of Hastelloy UNS N10276 polished plates is best done in the annealed condition. Since this particular alloy grade is prone to work hardening, only low cutting speeds are required.

The outstanding oxidation resistance of HASTELLOY X pipe bend is illustrated below. Tests were conducted by exposing samples to dry air at 2000 Deg. F. and to dry air pressurized to 300 psi at 1750 Deg. F.

Hastelloy’s resistance to sulfuric acid makes it a common choice for protection from hydrogen sulfide (H2S), more commonly known as?sour gas.

ASTM B619 UNS N10276 C276 pipes are also available in other shapes such as square, rectangular and hexagonal pipes. 2.4819 Hastelloy C-276 Alloy C276 pipe is used in applications where bending should not reduce strength. These ASTM B619 N10276 seamless pipes are mainly used to transport fuels from one place to another, as well as chemicals in different parts of processing plants.

It is commonly referred to by the tradename Hastelloy C22 and the universal designation UNS N06022. C22 has excellent corrosion and oxidation resistance, great mechanical properties over a wide range of temperatures, and good fabrication properties.

Hastelloy G30 is a combination of nickel, chromium, iron, cobalt, molybdenum, tungsten and manganese. Hastelloy G30 is primarily used to provide high resistance to chemical conditions. Hastelloy G30 is a high performance alloy with surface stability at high temperatures. In the welded form, the corrosion resistance is also carried over. Hastelloy G30 fasteners are highly ductile. Hastelloy G30 resists deformation at high temperatures. Hastelloy G30 is used in applications requiring high corrosion and deformation resistance. Using cold working, these fasteners are hardened. These fasteners have high oxidation resistance.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

INCONEL alloy C-276 is designated as UNS N10276 and Werkstoff Nr. 2.4819. It is listed in NACE MR0175 for oil and gas service.

The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

The best feature of Hastelloy C22 threaded flanges is that it has the best resistance to oxidizing aqueous media and a wide range of chemical process environments, including oxidizers like ferric acids, seawater, and chloride solution.

HASTELLOY C-276 is a nickel-chromium-molybdenum alloy with universal corrosion resistance unmatched by any other alloy. It has outstanding resistance to a wide variety of chemical process environments including ferric and cupric chlorides, hot contaminated mineral acids, solvents, chlorine and chlorine contaminated (both organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride, sea water and brine solutions and hypochlorite and chlorine dioxide solutions. Alloy C276 also resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as-welded condition. It has excellent resistance to pitting and stress corrosion cracking.

ANSI B16.11 Hastelloy B2 plugs have excellent resistance to oxidizing aqueous media including wet chlorine and mixtures including oxidizing or nitric acid.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.