Hastelloy B3 pipe and tube with excellent resistance to pitting corrosion

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy Alloy B2 Pipes is known for its excellent chemical resistance, suited to high pressure and high temperature applications.

Alloy B-2 has poor corrosion resistance to oxidizing environments, therefore, it is not recommended for use in oxidizing media or in the presence of iron or copper salts, which may cause rapid premature corrosion failure.

Pipe bending allows systems to minimize pressure changes while still routing materials through complex piping systems.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition. Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

C276 is forged between 2250/1750oF (1230/955oC) and then soaked at the forging temperature for 30 minutes per inch of billet or ingot section thickness. Forging should begin immediately, the billet is removed from the reheat furnace, a 25/40% reduction helps retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.

Hastelloy C276 is one of the few materials that can withstand the corrosive effects of wet chlorine, hypochlorite and chlorine dioxide.

Two criteria for evaluating oxidation resistance are weight change and depth of corrosion penetration. HASTELLOY X pipe bend excels in both respects due to the formation of a protective, tenacious oxide film.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C-276 also has exceptional resistance to pitting, stress-corrosion cracking and oxidizing atmospheres, as well as excellent resistance to multiple different chemical environments.

This alloy of flanges ensures excellent formability and weldability. Therefore these are cold and hot worked.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition. Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

Hastelloy X alloy is a nickel-chromium-iron-molybdenum alloy with excellent oxidation resistance and high temperature strength, while still being easy to manufacture. It has also been found to be extremely resistant to stress corrosion cracking in petrochemical applications. This alloy exhibits good ductility after prolonged exposure to temperatures of 1200¡ã, 1400¡ã and 1600¡ã (650¡ã, 760¡ã, 870¡ã Celsius) for up to 16,000 hours.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available.

Hastelloy C276 is known for its excellent corrosion resistance in a variety of corrosive media. It includes chloride ions, sulfur compounds, etc. In addition, this alloy has excellent resistance to crevice corrosion, pitting corrosion and stress corrosion cracking. It helps resist the corrosive effects of wet chlorine, chlorine dioxide and hypochlorite. This product is ideal for seawater applications.

Our Hastelloy B2 Lap Joint Flanges are also being offered in customized sizes and shapes to our customers. The extremely low carbon and silicon content of these Hastelloy B2 Socket Weld Flanges reduces precipitation of carbides and other phases in the heat ¨C affected zone of welds and ensures adequate corrosion resistance even in the welded condition.

It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers. C 276 alloy has excellent resistance to pitting and to stress corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

Hastelloy c22 fasteners are also resistant to wear in high temperature atmospheres and corrosive environments. Some of the environments in which these fasteners exhibit resistance are oxidizing media, reducing media, chloride environments, and sulfur environments. They are resistant to attack by chemicals such as nitric acid, chlorine, sulfur, acetic acid, organic, inorganic, phosphorus, etc.

Hastelloy C22, also known as Alloy C22, is a general-purpose austenitic grade alloy. The primary alloy materials used in Hastelloy C22 fasteners include metals such as nickel, chromium, molybdenum and tungsten. The main characteristic or characteristic of Hastelloy WERKSTOFF NR. 2.4602 Bolts are their enhanced resistance to pitting, crevice corrosion, and stress-related corrosion cracking.

Alloy C276 nickel alloy plate is one of the premier corrosion resistant materials that performs exceptionally well in both oxidizing and reducing environments. Therefore the Haynes Alloy C276 N10276 Polished Plate is used in industries such as pulp and paper production, chemical processing, pollution control, industrial and municipal waste treatment, as well as for the recovery of sour natural gas in sour wells.

Hastelloy c276 sheets Coils, which has excellent resistance to pitting, crevice corrosion and stress corrosion cracking. Pulp and paper production for example is in need of our Hastelloy C276 Plates that can withstand the chemicals used for the treatment of certain types of paper.

Hastelloy X pipe bend is corrosion resistant, heat resistant and oxidation resistant, being able to withstand reducing or neutral atmospheres and oxidation.

C276 Elbow has excellent corrosion resistance to a wide range of concentrated hot acids and reducing environments and can be easily used in hot sulfuric and hydrochloric applications.

The flange is second most used joining method after welding. Flanges are used when joints need dismantling. It provides flexbility for maintenance. Flange connects the pipe with various equiment and valves. Breakup flanges are adde din the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrelated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls ae required in the selection and application of all these elements to attain a joint, which has acceotable leak tightness.

HASTELLOY X pipe bend is a wrought nickel base alloy with excellent high temperature strength and oxidation resistance. All of the product forms are excellent in terms of forming and welding.

Hastelloy c-22 and c-276 are the only materials resistant to corrosion in wet chlorine, hypochlorite, and chlorine dioxide solutions, with significant resistance to high chloride solutions such as ferric and cupric chlorides. Corrosion resistance.

Hastelloy C22/C276 pipes and tubes are manufactured by mechanical treatment or electroplating and machining. The inner and outer surfaces of the Hastelloy tubing are electropolished for a uniform appearance.

The ANSI B16.5 Hastelloy C22 Weld Neck Flanges is an austenitic alloy grade that is considered to be versatile in nature. Chemically, the DIN 2.4602 Slip On Flange consists of elements such as nickel, chromium, molybdenum & tungsten as a primary base in the alloy.

HASTELLOY C276 is one of the few alloys resistant to wet chloride gas, hypochlorite and chlorine dioxide solutions.

The alloy is forged between 2250/1750oF (1230/955oC) and then soaked at the forging temperature for 30 minutes per inch of billet or ingot section thickness. Forging should begin immediately, the billet is removed from the reheat furnace, a 25/40% reduction helps retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.