Hastelloy B3 prefabrication pipes with flanges for non-oxidizing media

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Alloy 22 (UNS N06022) is the most versatile Nickel Chromium Molybdenum Tungsten alloy with controlled Iron. Due to Alloy 22’s content this alloy exhibits excellent resistance to both oxidising and reducing acid environments as well as those containing mixed acids.

Alloy X pipe bend specimens showed no carburization at all. Of ten materials evaluated in an atmosphere of hydrogen, nitrogen and ammonia at 1100 Deg. F. and 25,00 psi for 64 days, Alloy X had a nitride case less than one-fourth as thick as the closest competitive material without intergranular attack.

Like other nickel alloys, HASTELLOY C-22 alloy is fairly ductile, has excellent weldability, and is easily fabricated into industrial parts. It is available in sheet, sheet, strip, billet, bar, wire, tube and tube. Typical applications may include: reactors, heat exchangers and columns.

Alloy X pipe bend is known for its excellent high temperature strength withstanding up to 2200¡ãF. The alloy can also be easily fabricated with forming and welding characteristics by both manual and automatic methods.

The low carbon minimizes carbide precipitation during welding to maintain resistance to intergranular attack in heat-affected zones of welded joints.

Hastelloy C-276 is a very popular alloy for us because of its high corrosion resistance in a wide range of environments. It has excellent resistance to oxidizing aqueous media, including wet chlorine and mixtures of oxidizing acids containing nitric or chloride ions.

Hastelloy C276 alloy is a nickel-molybdenum-chromium wrought alloy that is considered a “multifunctional corrosion-resistant alloy”. Hastelloy C276 alloy has excellent corrosion resistance to both oxidizing and reducing media and excellent resistance to localized corrosion attack. The material also contains cobalt, tungsten, iron, silicon, manganese, carbon and vanadium in its composition. Due to this special combination, C276 Hastelloy bolts are also very resistant to pitting and crevice corrosion.

Hastelloy C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents (such as ferric chloride and cupric chloride), hot fouling media (organic and inorganic), chlorine, formic and acetic acid, acetic anhydride, and Seawater and brine solutions.

HASTELLOY C-2000 alloy (UNS N06200) is unique among the versatile nickel-chromium-molybdenum materials in having a deliberate copper addition.

Hastelloy C276 Specialty Bolts are a standard grade of austenitic stainless steel fasteners based on 15% chromium and 57% nickel.

Alloy B (UNS N10001) was developed to resist hydrochloric acid. Hastelloy B2 has replaced it. Alloy B3 (UNS N10675) is a newer variant with higher thermal stability. These alloy B2 bolts are a wrought nickel molybdenum alloy that can be used in the as-welded condition. It is highly resistant to hydrochloric acid of all concentrations and temperatures. Known as UNS N10665 bolts, these bolts are also resistant to stress corrosion cracking and pitting.

Alloy C276 is increasingly used in aggressive or corrosive environments where other alloys fail.

Hastelloy B2 pipe bend resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition.

ANSI B16.11 Hastelloy B2 plugs have excellent resistance to oxidizing aqueous media including wet chlorine and mixtures including oxidizing or nitric acid.

The primary alloy base materials for Hastelloy C276 include metals such as nickel, molybdenum and chromium. In addition to these three metals, Hastelloy C276 fasteners also have tungsten added. It is well known that the addition of tungsten to superalloys can improve the corrosion resistance of alloys in various harsh environments.

Hastelloy B3 Lap Joint Flanges has a special chemistry designed to achieve a level of thermal stability greatly superior to that of its predecessors, e.g. B2 alloy.

The distinguishing feature of Hastelloy B3 hex bolts is their ability to maintain excellent ductility during transient exposure to intermediate temperatures. Hastelloy B3 bolts are made of an alloy containing nickel and molybdenum. These bolts are resistant to corrosion, pitting and stress corrosion cracking. These bolts can also withstand a variety of acid binding environments, such as those containing sulfuric, acetic, formic, and phosphoric acids.

Hastelloy C-276 fasteners and other products in the Hastelloy family have excellent resistance to corrosion and oxidizing and reducing chemicals. Due to its adaptability, Hastelloy C-276 alloy can be used in problem areas and is more likely to occur in process areas. In Hastelloy C276 hex bolts, the chromium content is increased to about 21% and the molybdenum content is reduced to about 13%. Hastelloy C276 Heavy Duty Hex Bolts also provide optimum resistance to environments encountered in reducing and oxidizing conditions in the process stream.

The alloy is forged between 2250/1750oF (1230/955oC) and then soaked at the forging temperature for 30 minutes per inch of billet or ingot section thickness. Forging should begin immediately, the billet is removed from the reheat furnace, a 25/40% reduction helps retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.

Hastelloy C22 washers are composed of a nickel-chromium-molybdenum alloy that, like other high-nickel alloys, is highly ductile, making it easy to machine, weld, and fabricate into nuts, bolts, and screws. Hastelloy C-22 washers are made of Haynes International trademark alloy, also known as UNS N06022 or alloy 22 fasteners. C-22 fasteners are made from one of the more popular Hastelloy alloys. It is highly resistant to oxidizing/non-oxidizing chemicals, making it an excellent alloy for columns, heat exchangers and reactors in the chemical processing industry.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

While fitting and sizing bent pipes might seem complex at first, a basic understanding of the measurements used make matching them to your existing system or integrating them into a new design straightforward.

Exposures like this are regularly experienced during heat treatments that are linked with fabrication.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

A nickel alloy of this type also has great resistance to hydrochloric acid at different concentrations and temperatures.

Hastelloy C276 Sheets, Plates and Coils (also referred as WNR 2.4819) that are actually manufactured from High Quality of Standard Raw Materials and are designed as per with national and international standards.

The flange is second most used joining method after welding. Flanges are used when joints need dismantling. It provides flexbility for maintenance. Flange connects the pipe with various equiment and valves. Breakup flanges are adde din the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrelated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls ae required in the selection and application of all these elements to attain a joint, which has acceotable leak tightness.

In Hastelloy C276 hex bolts, the chromium content is increased to about 21% and the molybdenum content is reduced to about 13%. Hastelloy C276 Heavy Duty Hex Bolts also provide optimum resistance to environments encountered in reducing and oxidizing conditions in the process stream. Due to the use of experienced qualified professionals and the latest technological machinery.

The nickel and molybdenum component of ASTM B575 Hastelloy C-276 Sheets aids in their resistance to pitting and crevice corrosion in reducing conditions.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.