Hastelloy C22 pipe bend used for high mechanical stress

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Alloy B-2 has poor corrosion resistance to oxidizing environments, therefore, it is not recommended for use in oxidizing media or in the presence of iron or copper salts, which may cause rapid premature corrosion failure.

This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition.

Controlling other alloying elements such as iron and chromium

Hastelloy B3 has excellent resistance to hydrochloric acid at all concentrations and temperatures. In addition, it greatly improves structural stability compared to previous B-type alloys, reducing concerns during welding, fabrication and service.

Hastelloy G-30 is commonly used for providing excellent resistance to chemical conditions.
It offers resistance to nitric acid, phosphoric acid, hydrochloric acid and hydrofluoric acid.
Corrosion resistance properties are also retained even in welded form. High ductility. It is
used in chemical treatment plants, agitator blades, nuclear plants etc.

Alloy C276 is a Ni-Cr-Mo alloy containing W and very low carbon and Si content.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition. Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

HASTELLOY X pipe bend is a wrought nickel base alloy with excellent high temperature strength and oxidation resistance. All of the product forms are excellent in terms of forming and welding.

Hastelloy X pipe bend is widely used for a variety of chemical processing parts, including retorts, pyrolysis tubing, and muffles due to its exceptional resistance to stress-corrosion cracking.

Although HASTELLOY X pipe bend is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress-corrosion cracking and has good resistance to carburization, excellent resistance to reducing or carburizing atmospheres.

Alloy X pipe bend offers exceptional performance in furnace rolls or other industrial furnace applications because of the alloy’s strong resistance to oxidizing, reducing and neutral atmospheres.

Hastelloy is a term used to describe nickel metal that has been alloyed to increase corrosion resistance. This is primarily done through the addition of molybdenum and chromium.It is commonly used for pipes and valves in the chemical and petrochemical industries. It is also used in reactor vessels in the chemical and nuclear industries.

Hastelloy C276 bolts are used in heavy duty applications due to their excellent mechanical quality. This material is one of the most corrosion-resistant materials used in the world. The bolt can be used with welding without the effects of grain boundary precipitation because it has virtually no carbide precipitation during welding. Hastelloy C276 bolts can be used in acid treatment applications because the material resists most corrosive conditions, including heavy sulfur compounds and chloride ions. This quality makes it suitable for desulfurization machinery, flue gas machinery and other harsh conditions.

According to the flange size, wall thickness and diameters, the pressure classes vary from class 150 through class 2500. There are also different faced flanges such as the ring type joint Alloy B2 RTJ Flange, raised face flange and flat face flange.

C276 is a nickel-molybdenum-chromium superalloy with tungsten added, designed for excellent corrosion resistance in a variety of harsh environments. The high nickel and molybdenum contents make nickel steel alloys particularly resistant to pitting and crevice corrosion in reducing environments, while chromium is resistant to oxidizing media.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

B3 Hastelloy Flanges has special chemistry designed to achieve high thermals stability than the Alloy B 2, performing in easier fabrication.

This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone.

Hastelloy c22 fasteners are also resistant to wear in high temperature atmospheres and corrosive environments. Some of the environments in which these fasteners exhibit resistance are oxidizing media, reducing media, chloride environments, and sulfur environments. They are resistant to attack by chemicals such as nitric acid, chlorine, sulfur, acetic acid, organic, inorganic, phosphorus, etc.

The trade name for Hastelloy B2 tube is also known as UNS N10665. B2 Hastelloy Welded Pipe is a solid solution nickel molybdenum based alloy. One of the highlights of the nickel alloy b2-lined hex pipe is its corrosion resistance.

Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to pitting, corrosion, and stress-corrosion cracking plus, thermal stability superior to that of alloy B-2. In addition, this nickel steel alloy has great resistance to knife-line and heat¨Caffected zone attack.

Hastelloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Alloy X pipe bend is one of the most widely used nickel base superalloys for gas turbine engine components.

Hastelloy B3 Ring Type Joint Flanges is ideally suited for applications requiring corrosion resistance superior to SS 304 and has good elevated temperature strength.

Hastelloy G30 is a nickel-based alloy with a high chromium content that provides superior corrosion resistance to commercial phosphoric acid and many highly oxidizing acid media.

Hastelloy X Bolts have been widely used in combustion zone components of turbine engines such as transition ducts, combustion chambers, booms and flame holders, as well as afterburners, exhaust pipes and cabin heaters. This alloy is recommended for industrial furnace applications due to its unusual resistance to oxidation, reduction and neutral atmosphere.

Another feature of HASTELLOY-X fasteners is their excellent forming and welding characteristics. It can be forged and can be cold worked due to its good ductility. Common applications for Hastelloy x include use in aircraft furnaces and chemical process components.

HASTELLOY C-2000 alloy (UNS N06200) is unique among the versatile nickel-chromium-molybdenum materials in having a deliberate copper addition.

Los tubos de caldera de aleacion C276 estan disponibles en tama?os ATSM 622/ 619/ 775/ 516/ 626. La tuberia sin soldadura Hastelloy C276 funciona bien incluso en agua salada corrosiva. Los fabricantes de tuberias Hastelloy recomiendan la tuberia soldada Hastelloy Astm B626 C276 por su resistencia a los compuestos de cloro.

Hastelloy B3 bolts are also known as alloy B-3 bolts and can be found under UNS N10675. This alloy is extremely resistant to pure hydrobromic, sulfuric and hydrochloric acids. Many industries, including the chemical industry, consider the alloy easy to machine, and its ductility allows machinists to easily form and even weld.