Hastelloy C276 Bushing suitable for most chemical process applications

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy G30 is a nickel-based alloy with a high chromium content that provides superior corrosion resistance to commercial phosphoric acid and many highly oxidizing acid media.

Nickel alloys are alloys with nickel as principal element. Complete solid solubility exists between nickel and copper. Wide solubility ranges between iron, chromium, and nickel make possible many alloy combinations.Steel plates are often used for structural and construcation applications, pressure vessels, marine and off shore equipment, and military applications. The grade, elements and parameters of a steel plate are also improtant in how it is used.

Alloy C276 is increasingly used in aggressive or corrosive environments where other alloys fail.

Hastelloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

It has great resistance to stress-corrosion cracking and pitting. Hastelloy B-2? also features hydrochloric acid resistance at all concentrations and temperatures.

Strong and Oxidation Resistant to 2200 Deg. F (1200 Deg. C) – HASTELLOY X pipe bend is a solid solution strengthened grade has good strength and oxidation resistance up to 2200 Deg. F (1200 Deg. C).

Hastelloy C22 or Wnr 2.4617 Material is also referred to as alloy C22.

Hastelloy C2000 flanges are a special alloy for securing chemical process equipment under different conditions, including streams contaminated with ferric ions.

Available in various forms, the material is known to be very versatile. The basic chemical makeup of a Hastelloy C276 seamless Pipe includes Nickel, chromium, and molybdenum in its alloy. The trio elements in this wrought alloy are what gives the Hastelloy C276 welded Pipe its high mechanical properties in addition to its excellent corrosion resistance properties.

Hastelloy C-263, is an age hardenable nickel-cobalt-chromium-molybdenum alloy.Hastelloy? 2 C-263 has some very positive attributes that make it ideal for a wide range of applications. HAYNES? 263 alloy combines properties which make it suitable for a variety of fabricated component applications in both aircraft turbine engine and industrial turbine applications.

INCONEL alloy C-276 is designated as UNS N10276 and Werkstoff Nr. 2.4819. It is listed in NACE MR0175 for oil and gas service.

Alloy B2 also has excellent resistance to pitting and stress corrosion cracking.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Hastelloy B3 Flanges has great resistance to cutter line, and heat affected zone attack.

HASTELLOY C-4 alloy (UNS N06455) is the most (microstructurally) stable of the widely
used nickel-chromium-molybdenum materials, which are well known for their resistance
to many aggressive chemicals, in particular hydrochloric acid, sulfuric acid, and chlorides. This alloy resists the formation of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition.

Hastelloy c22 fasteners are also resistant to wear in high temperature atmospheres and corrosive environments. Some of the environments in which these fasteners exhibit resistance are oxidizing media, reducing media, chloride environments, and sulfur environments. They are resistant to attack by chemicals such as nitric acid, chlorine, sulfur, acetic acid, organic, inorganic, phosphorus, etc.

The use of modular construction is directly influenced by the client¡¯s requirements for speed of construction, quality, added benefits of economy of scale, as well as single-point procurement.

Rotary draw bending can also utilize mandrels.

Hastelloy X alloy (UNS N06002; W.Nr. 2.4665) is a high temperature, matrix strengthened, NiCrFeMo alloy with excellent oxidation resistance and excellent Strength. Hastelloy X alloy is a nickel-chromium-iron-molybdenum alloy that provides excellent oxidation resistance and high temperature strength while still being easy to manufacture.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The exceptional corrosion resistance of C22 has promoted its use in many different markets wherever harsh environments are encountered, including the chemical process, pharmaceutical, food processing, oil and gas, power generation, and the paper industries.

Hastelloy B3 is a nickel-molybdenum alloy with profound resistance to stree-corrosion cracking, pitting, corrosion and thermal stability greater to that of alloy B2.

Hastelloy C22 weld neck flanges have the best resistance to pitting and stress corrosion cracking.

Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

The nickel and molybdenum component of ASTM B575 Hastelloy C-276 Sheets aids in their resistance to pitting and crevice corrosion in reducing conditions.

La aleacion C276 se considera una de las listas de productos de superaleaciones. Las superaleaciones (o metales especiales) se utilizan en entornos hostiles debido a su capacidad para manejar condiciones corrosivas.

Forged Pipe Fittings(Socket Weld and Threaded) are made in accordance to ASME B 16.11, MSS-SP-79/83/95/97 and BS3799 Standards, and are used to connect nominal bore schedule pipes and pielines.

This nickel alloy has excellent resistance to hydrochloric acid at all concentrations and temperatures.