Hastelloy C276 butt welded elbows with outstanding resistance to pitting and crevice corrosion attack

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

C276 is forged between 2250/1750oF (1230/955oC) and then soaked at the forging temperature for 30 minutes per inch of billet or ingot section thickness. Forging should begin immediately, the billet is removed from the reheat furnace, a 25/40% reduction helps retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.

Hastelloy B3 has excellent resistance to hydrochloric acid at all concentrations and temperatures. In addition, it greatly improves structural stability compared to previous B-type alloys, reducing concerns during welding, fabrication and service.

Hastelloy C276 has a low carbon content to minimize grain boundary carbide precipitation during welding to maintain corrosion resistance in the heat affected zone of the welded joint

Like other nickel alloys, HASTELLOY C-22 alloy is fairly ductile, has excellent weldability, and is easily fabricated into industrial parts. It is available in sheet, sheet, strip, billet, bar, wire, tube and tube. Typical applications may include: reactors, heat exchangers and columns.

The corrosion resistance property of the alloy is credited to the addition of both Molybdenum and nickel.

Our Hastelloy B2 Lap Joint Flanges are also being offered in customized sizes and shapes to our customers. The extremely low carbon and silicon content of these Hastelloy B2 Socket Weld Flanges reduces precipitation of carbides and other phases in the heat ¨C affected zone of welds and ensures adequate corrosion resistance even in the welded condition.

The sheer variety of pipe bend sizes and materials also make them suitable for routing everything from hot or caustic liquids to maintaining pressure and movement in high viscosity liquids or those with suspended solids, such as Oil Sands slurry lines which contains a high concentration of silica sand.

In comparison to the other Hastelloy alloys, Hastelloy C2000 Flanges were designed to provide more adaptability. In addition to adding a little amount of copper (1.6%), this was accomplished by enhancing the proportion of chromium and molybdenum.

Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to pitting, corrosion and stress corrosion cracking and better thermal stability than alloy B-2. In addition, this nickel-steel alloy is highly resistant to knife-line and heat-affected zone attacks.

C22 can be hot worked or cold worked. However, C22 work-hardens rapidly. Therefore, cold working must often be performed in stages with intervening anneals. Parts should be annealed after cold working.

It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers.

C22 has excellent resistance to oxidation, carburization, and sulfidation at elevated temperatures. However, C22 should not be used at temperatures above 1250¡ãF due to the possible formation of embrittling phases.

The premium composition of molybdenum and nickel content of c276 is used to make nickel steel alloys. It helps resist crevice and pitting corrosion in reducing environments. Chromium, on the other hand, is used to impart resistance to oxidizing media.

Hastelloy C276 alloy hollow rods tend to exhibit excellent resistance to localized corrosion and oxidizing media as well as reducing media.

There are different types such as the Hastelloy B2 Slip On Flanges , socket weld flanges, and welded neck flanges. These have 790MPa minimum tensile strength, 355MPa minimum yield strength and 40% elongation rate.

Hastelloy C-276 is a nickel-molybdenum-chromium alloy with excellent corrosion resistance in severe environments.

Hastelloy B2 pipe bend is a nickel-molybdenum alloy particularly suited for equipment handling reducing chemical environments.

Alloy steel round bars provide good weldability without compromising the wear and impact resistance of the steel. Common uses of alloy steel round bars include structural applications in gears, fasteners, and aircraft applications.

Hastelloy G30 Hastelloy alloys exhibit better resistance to commercial phosphoric acid than other nickel or iron based alloys. Its application as an acid evaporator in the fertilizer industry is increasing day by day.

The flanges also have 8.89 grams per cubic centimeter density and 1370 degrees melting point. The DIN 2.4617 Socket Weld Flanges and other flanges are used in high temperature, high corrosive and high stress applications due to the higher mechanical properties.

Each method has unique benefits and will determine the degree of bending possible and the final shape of the pipe.

Hastelloy B3 studs are suitable for all applications that previously required the use of Hastelloy B2 alloy. Due to the enhanced thermal stability of Hastelloy B3 square bolts, the problems associated with manufacturing Hastelloy B2 parts are reduced.

Hastelloy C276 grade round bars also have good corrosion resistance in seawater and brine solutions. They are also known for their resistance to localized corrosion such as stress-related corrosion cracking and pitting.

Hastelloy B2 pipe bend has excellent resistance to all temperatures and concentrations of hydrochloric acid.

Controlling other alloying elements such as iron and chromium

Hastelloy’s resistance to sulfuric acid makes it a common choice for protection from hydrogen sulfide (H2S), more commonly known as?sour gas.

It can be used in reducing chemical environments and chemical processing industry.

Hastelloy X is a nickel-chromium-iron-molybdenum alloy. It has excellent oxidation resistance, workability and high temperature strength. It also exhibits good resistance to stress corrosion cracking in petrochemical applications. It shows very good ductility after prolonged exposure at 1200 to 1600 degrees Fahrenheit. It has excellent forming and welding properties, and is widely used in furnaces for aircraft and gas turbines.

The primary alloy base materials for Hastelloy C276 include metals such as nickel, molybdenum and chromium. In addition to these three metals, Hastelloy C276 fasteners also have tungsten added. It is well known that the addition of tungsten to superalloys can improve the corrosion resistance of alloys in various harsh environments. Hastelloy C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents such as ferric and cupric chlorides, hot fouling media (organic and inorganic), chlorine, formic and acetic acid, acetic anhydride , seawater and brine solutions.

Hastelloy C276 bushings are widely used in the harshest environments such as chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of sour natural gas.