Hastelloy C276 C22 Sheet Factory

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

This action draws the pipe or tube forward making the desired bend.

Alloy X pipe bend is one of the most widely used nickel base superalloys for gas turbine engine components.

VDM Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

This nickel alloy also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. This is beneficial in multi- purpose plants where such ¡°upset¡± conditions occur frequently.

Hastelloy B2 pipe bend is a solid solution strengthened, nickel-molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, acetic and phosphoric acids.

Alloy C276 is increasingly used in aggressive or corrosive environments where other alloys fail.

Alloy X pipe bend specimens showed no carburization at all. Of ten materials evaluated in an atmosphere of hydrogen, nitrogen and ammonia at 1100 Deg. F. and 25,00 psi for 64 days, Alloy X had a nitride case less than one-fourth as thick as the closest competitive material without intergranular attack.

Hastelloy C276 has excellent resistance to pitting, oxidation and stress corrosion cracking environments. Hastelloy is an alloy mainly composed of nickel, molybdenum and chromium, which is known for its high corrosion resistance. Its ductility, flexibility, durability, and other properties make it one of the most popular alloys for industry and household use.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The Hastelloy UNS N10665 Pipe Flanges come under the ANSI, ASTM, DIN and other international standards with various dimensions and pressure classes.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications.Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

This alloy is exhibiting good corrosion resistance at aggressive reducing media like hydrochloric acid that range of concentrations and temperatures and in medium-concentrated sulphuric acid and with limited chloride contamination.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications.Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition.

Our Hastelloy B2 Ring Joint Type Flanges is not recommended for use in the presence of ferric or cupric salts as these salts may cause rapid corrosion failure. Ferric or cupric salts of these Hastelloy B2 Nippo Flanges may perhaps develop when hydrochloric acid comes in contact with iron or copper.

As with most piping considerations, understanding the ideal uses for bent pipe in your design or project is essential to the proper operation of the finished system.

Alloy X is known for its excellent high temperature strength and can withstand temperatures up to 2200¡ãF. The alloy can also be easily fabricated by manual and automated methods with forming and welding properties. In addition, Hastelloy X is resistant to corrosion, heat and oxidation and can withstand reducing or neutral atmospheres and oxidation.

The low carbon content in the 2.4819 alloy C276 tube minimizes carbide precipitation. Carbide precipitation is a phenomenon that occurs during welding of various alloy grades.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition. Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

When standard 90-degree elbows won¡¯t work with your system design or space requirements, bent pipes and tubing are an excellent routing option.

Pipe bending methods will vary based upon the metals used.

ANSI B16.11 Hastelloy B2 plugs have excellent resistance to oxidizing aqueous media including wet chlorine and mixtures including oxidizing or nitric acid.

Nickel alloys provide high resistance to a wide variety of corrosive agents, oxidation and excellent performance at high temperatures.Certain Nickel Alloys are better for high temperature applications, while others do a better job with corrosion resistance.

Hastelloy C2000 flanges are a special alloy for securing chemical process equipment under different conditions, including streams contaminated with ferric ions.

It can be used in reducing chemical environments and chemical processing industry.

Incoloy alloy is applied as the prefix name to several highly corrosion resistant high temperature strength metal alloys produced by Special Metals Corporation. Nickel alloys are excellent for heat exchangers in the chemical processing and nuclear industries. They’re used in steam generator tubing in the nuclear power industry, in high-temperature aircraft systems, and in oil and gas extraction programs where corrosion-, pressure- and temperature-resistant tubing is required

Hastelloy C-2000 Fastener, also known by many as Alloy C-2000, is a versatile nickel-chromium-molybdenum alloy with excellent resistance to stress corrosion cracking and pitting corrosion. The C-2000 fastener (UNS N06200) is unique among other Hastelloy alloys with approximately 1.6% copper added to its chemical composition. These properties make them ideal for applications such as heat exchangers and industrial reactors.

Hastelloy B2 Flanges come under the ASTM B564 specification with sizes ranging from ? inches to 60 inches under different standards.

HASTELLOY C276 has exceptional resistance to strong solutions of oxidizing salts, such as ferric and cupric chlorides.

Hastelloy G30 is a combination of nickel, chromium, iron, cobalt, molybdenum, tungsten and manganese. Hastelloy G30 is primarily used to provide high resistance to chemical conditions. Hastelloy G30 is a high performance alloy with surface stability at high temperatures. In the welded form, the corrosion resistance is also carried over. Hastelloy G30 fasteners are highly ductile. Hastelloy G30 resists deformation at high temperatures. Hastelloy G30 is used in applications requiring high corrosion and deformation resistance. Using cold working, these fasteners are hardened. These fasteners have high oxidation resistance.