hastelloy c276 pipe

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Hastelloy B3 pipe is significantly resistant to corrosion resistance at reducing atmosphere. Hastelloy B2 pipes are having excellent resistance to non-oxidizing acid and sulphuric acid.

Inconel WERKSTOFF NR.2.4668 Tubing is a nickel based alloy which has been precipitation hardened. The inconel 718 tube is designed to be used in those applications which have the need for very high yield strength, high tensile strength as well as good creep rupture properties.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel 400 Annealed Pipe, which is also referred to as a superalloy can be annealed at a temperature of 926¡ãC.

Because nickel alloys are highly ductile, they can be processed very efficiently into pipes and tubes while maintaining strength. This makes them ideal for use in heat exchangers in chemical processing, for example, which rely on pipes that can withstand high temperatures and corrosive environments. Nickel-based tubing is also used in steam generators, aircraft systems, and oil and gas extraction.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.29

That’s why our customers prefer to work with nickel alloy tubes. In addition, nickel alloy tubes have good thermal, electrical and magnetostrictive properties. The relatively high thermal conductivity of this grade of nickel tubing results in its frequent use as part of heat exchangers.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

Nickel alloys are mainly nickel 200 and nickel 201. These nickel alloys are often used to make strong quality pipes. They have high resistance. They are commonly used in aircraft gas turbines, steam turbine power plants, medical applications, nuclear power systems, chemical and petrochemical industries. Pipes and tubing made of nickel alloys are environmentally friendly and easy to maintain.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

Applications for hastelloy c276 include stack liners, pipes, dampers, scrubbers, stack gas reheaters, heat exchangers, reaction vessels, evaporators, transfer piping and many other highly corrosive applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.29

Otra diferencia entre la tuberia soldada Astm B626 de aleacion de niquel C276 y la aleacion C es que la tuberia de aleacion C276 tiene una mejor maquinabilidad.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Alloy C276 Seamless Nickel Tube is a Nickel Molybdenum Chromium alloy with added tungsten for excellent corrosion resistance in a wide range of harsh environments. The high molybdenum content makes this alloy particularly resistant to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain the corrosion resistance of the welded structure. Its typical applications: pollution control, chemical processing, pulp and paper production and waste disposal.

Talking about the general properties exhibited by Incoloy 800 grades, Incoloy 800/800H/800HT pipe exhibits excellent corrosion resistance, pitting resistance in chloride environments, resistance to various acidic environments, good general corrosion resistance, flow resistance Grain alloy crack corrosion, crevice corrosion resistance and easier weldability and hardness.

Incoloy 800HT seamless pipe is available up to 8″ NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT tubing is available up 3″ OD. Incoloy 800HT redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Monel 400 is also often used for the high tolerance tubing. It exhibits excellent weldability, and it is often found in marine applications such as seawater valves and pump shafts. These tubes are also used in chemical plant equipment, boiler feeders, and heat exchangers. For applications that require a high melting point and toughness under the harshest conditions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures. It also withstands sulfuric, acetic, formic and phosphoric acids, and other nonoxidizing media. B-3 alloy has a special chemistry designed to achieve greater thermal stability than B-2 alloy, resulting in easier fabrication.

Incoloy 909 Tube has a higher ferrous content and a lower overall cost of ownership. We offer quick responses to customer inquiries and specialize in the rapid delivery of both large and small quantities of Incoloy 909 Tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

The combination of good weldable properties along with resistance to the grain-boundary precipitate being formed on the enables the Hastelloy C22 Tube to be used in an as welded condition. This being said, however, the Tubing Sb 622 UNS N06022 must not be used beyond a temperature of 1250 F. At temperatures exceeding 1250 F, the Hastelloy UNS N06022 Tubing material is prone to the formation of detrimental phases. This, in turn, could lead to loss of several important properties of the ASTM B622 UNS N06022 Tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel 201 is pure commercial nickel with very low carbon content and has been approved for service in high temperature environments up to 1230¡ãC.

The properties of Inconel 601 make it a material with a wide range of uses in thermal processing, chemical processing, pollution control, aerospace and power generation. However, Alloy 601 is not recommended for use in strongly reducing, sulfur-containing environments.

Nickel alloys of the MONEL series can also be used for pipes and tubes. MONEL Alloy 400 is a cost-effective option but can be hardened by hot or cold work, providing a very durable end product. It has been on the market for decades and is ideal for marine applications due to its resistance to seawater corrosion. It can also be used for heat exchanger piping and rocket applications.

Hastelloy C276 low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance of welded structures. This nickel alloy resists the formation of grain boundary deposits in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded state.
Type Seamless Pipe Seamless Tube
Welded Pipe Welded Tube SAW LSAW ERW EFW
Beveled End, Plain End
Size OD: 1/2″ ~48″
Thickness: SCH5~SCHXXS
Length As per your requirement.
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

Nickel tube suppliers cold work nickel custom tubes after the welding operation to ensure the alloy has the best corrosion resistance. This is a mandatory or important requirement for nickel welded pipes, especially in the welded area and in the base metal during final heat treatment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.47

Alloy C 276 (UNS N10276/ 2.4819) is known for its corrosion resistance in a variety of corrosive media. The high molybdenum content imparts resistance to localized corrosion such as pitting. Low carbon minimizes carbide precipitation during welding to maintain the resistance of the welded joint heat affected zone to intergranular erosion. It is used in chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of “sour” natural gas. Applications in air pollution control include stack liners, ducts, dampers, scrubbers, stack gas reheaters, fans and fan guards. In chemical processing, the alloy is used to make components such as heat exchangers, reaction vessels, evaporators and transfer piping.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

In addition to a high melting point and resistance to oxidation and corrosion, nickel alloys are also highly ductile. They can be plated and are easy to solder, making them suitable for industries that require very high and very low temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

The inconel pipe grades need to also be cold worked after performing the welding process. Welding done on a Inconel Hollow Pipe ensures that the alloy has developed optimum resistance to corrosion in the weld area as well as base metal during the final heat treatment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Incoloy Alloy 625 Tubing has excellent strength resistance in high-temperature settings and outstanding oxidation and carburization resistance in high-temperature settings. While Incoloy Alloy 625 Tubing has good creep-rupture strength and good corrosion resistance in aqueous environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Each Inconel Hexagonal Pipe needs to either be welded and annealed condition or the Incoloy Welded Pipe needs to be stress relieved and produced from the flat rolled alloys by performing an automatic welding process without the use of any filler metal additions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Some typical applications for HASTELLOY C276 include equipment components in chemical and petrochemical organic chloride processes and processes using halide or acid catalysts. Other industrial applications include pulp and paper (digester and bleaching zones), scrubbers and pipes for flue gas desulfurization, pharmaceutical and food processing equipment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

Controlling other alloying elements such as iron and chromium