Hastelloy C276 plate corrosion resistance in welded structures

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy C276 plates are referred to as excessive-alloy steels, which have superb corrosion resistance in assessment with different steels as they include greater chromium.

The distinguishing feature of Hastelloy B3 hex bolts is their ability to maintain excellent ductility during transient exposure to intermediate temperatures. Hastelloy B3 bolts are made of an alloy containing nickel and molybdenum. These bolts are resistant to corrosion, pitting and stress corrosion cracking. These bolts can also withstand a variety of acid binding environments, such as those containing sulfuric, acetic, formic, and phosphoric acids.

Bushings, also known as sleeve bearings, are just one specific type of bearing. They slide on the rod to provide extremely low friction movement. They are ideal for shock absorption and minimise energy consumption, noise and wear.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Brushing these boards with stainless steel wire after the welding operation usually removes the hot color and likewise creates surface areas that do not require additional pickling.

Nickel alloys are excellent for heat exchangers in the chemical processing and nuclear industrie.Hastelloy Piping Systems are widely accepted by plant operations management and maintenance specialists who appreciate their toughness and ability to withstand very aggressive fluids.

HASTELLOY X pipe bend also resists carburization and nitriding, two common conditions which often lead to early failure in high-temperature alloys. After 100 hours in petroleum coke, four other materials were completely penetrated by carburization and whereas.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The flanges are furnished in solution heat treated circumstances, thus these are heat treated at 2150 degree F and get cooled rapidly.

In comparison to the other Hastelloy alloys, Hastelloy C2000 Flanges were designed to provide more adaptability. In addition to adding a little amount of copper (1.6%), this was accomplished by enhancing the proportion of chromium and molybdenum.

Hastelloy X is a nickel-based superalloy ideal for gas turbine engine, aircraft, industrial furnace, and chemical processing applications.

Hastelloy B2 pipe bend resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

Hastelloy C276 is a nickel-chromium-molybdenum wrought alloy considered to be the most versatile corrosion-resistant alloy known. This alloy is resistant to grain boundary deposits in the weld heat affected zone, making it suitable for most chemical process applications in the as-welded condition. Meanwhile, Hastelloy C276 fasteners are considered to be the most versatile and high-strength fasteners, finding their suitability in many industrial applications. These are nickel-molybdenum-chromium forged alloy fasteners that perform well in a variety of harsh environments. The presence of molybdenum and chromium content makes nickel alloy steel more resistant to crevice and pitting corrosion. Hastelloy c276 bolts are the highest quality bolts in the alloy series. These are corrosion resistant, which is important for the industries in which Hastelloy is best suited.

Used when large radius bends or curves are required, this method passes a piece of pipe or tube through a series of three rollers in a pyramid configuration to achieve the desired curve.

We have a comprehensive inventory of nickel alloy forged fittings, socket weld and threaded fittings in all types, sizes, schedules and pressures. HT PIPE specializes in the manufacture of nickel alloy forged fittings that are in high demand in many applications in the naval, chemical processing, marine, petrochemical and refining, and oil and gas markets.

Forged Pipe Fittings(Socket Weld and Threaded) are made in accordance to ASME B 16.11, MSS-SP-79/83/95/97 and BS3799 Standards, and are used to connect nominal bore schedule pipes and pielines.

Nickel Alloy C-276 and Hastelloy C-276 can be welded by all common welding methods (oxyacetylene is not recommended).

Hastelloy C22 Slip On Flanges (UNS N06022) is used in Chlorination systems, Nuclear fuel reprocessing, Pickling systems, and more.

Hastelloy B3’s distinguishing characteristic is its ability to maintain good ductility while transient exposure to intermediate temperatures.

They have good creep and oxidation resistance. Strengthening of super alloys is performed by solid-solution hardening, work hardening, and precipitation hardening methods.

HASTELLOY C-276 is a nickel-chromium-molybdenum alloy with universal corrosion resistance unmatched by any other alloy. It has outstanding resistance to a wide variety of chemical process environments including ferric and cupric chlorides, hot contaminated mineral acids, solvents, chlorine and chlorine contaminated (both organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride, sea water and brine solutions and hypochlorite and chlorine dioxide solutions. Alloy C276 also resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as-welded condition. It has excellent resistance to pitting and stress corrosion cracking.

Alloy B2 also has excellent resistance to pitting and stress corrosion cracking.

While there are slight variances to different hot pipe bending methods, nearly all are a form of induction bending.

These flanges are usually welded or screwed. In those instances where welding or bolting the flange is not possible, many industries prefer using WNR 2.4602 Threaded Flanges.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

These also enhances good resistance to pitting and crevice corrosion in tough climatic circumstances. These alloys of flanges also possess superior thermal conductivity and electrical resistivity.

UNS N10276 Sheets has excellent resistance to pitting corrosion, pressure corrosion cracking and a far higher resistance to crevice corrosion than steels of alloy.