Hastelloy C276 Plate Forging Application Scenarios

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

HASTELLOY X pipe bend also resists carburization and nitriding, two common conditions which often lead to early failure in high-temperature alloys. After 100 hours in petroleum coke, four other materials were completely penetrated by carburization and whereas.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C276 is resistant to localized corrosion such as pitting and stress corrosion cracking.

Hastelloy C22, also known as Alloy C22, is a general purpose austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. High chromium content provides good oxidation resistance, while molybdenum and tungsten content provides good reduction resistance. Hastelloy C22 alloy also has excellent resistance to oxidizing aqueous media, including wet chlorine and nitric acid-containing mixtures or oxidizing acids containing chloride ions.

The high molybdenum content of Hastelloy?* C276 provides the alloy with its excellent resistance to pitting and crevice corrosion.

These flanges exhibit superior resistance to carburization and chloride stress corrosion cracking in reducing atmospheres.

Hastelloy C-276 is the most common corrosion resistant material currently available, but it is not foolproof. Metals should not be exposed to high temperature, strong acid environment. Also, it is easier to work with cold working practices; hot working makes it easier to harden. If hot working, the temperature should be maintained between 1600¡ãF and 2250¡ãF.

Another feature of HASTELLOY-X fasteners is their excellent forming and welding characteristics. It can be forged and can be cold worked due to its good ductility. Common applications for Hastelloy x include use in aircraft furnaces and chemical process components.

Hastelloy X alloy is a nickel-chromium-iron-molybdenum alloy with excellent oxidation resistance and high temperature strength, while still being easy to manufacture. It has also been found to be extremely resistant to stress corrosion cracking in petrochemical applications. This alloy exhibits good ductility after prolonged exposure to temperatures of 1200¡ã, 1400¡ã and 1600¡ã (650¡ã, 760¡ã, 870¡ã Celsius) for up to 16,000 hours.

The Hastelloy c276 Sheet Plate is the sheet plates made of Hastelloy of grade C276.

C22 is typically provided in the annealed condition with a minimum yield strength of 45 ksi. However, C22 can be cold worked to higher strength levels.

Hastelloy B2 Flanges come under the ASTM B564 specification with sizes ranging from ? inches to 60 inches under different standards.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy G-30 is a high chromium nickel-base alloy which has superior corrosion resistance over most other nickel and iron-base alloys in commercial phosphoric acid as well as many complex environments containing highly oxidizing acids such as nitric/hydrochloric, nitric/hydrofluoric and sulfuric acids.

Alloy C22 is a nickel-chromium-molybdenum solid solution strengthened super-alloy with a nominal chemical composition of 56% nickel, 22% chromium, and 13% molybdenum, with additions of iron, tungsten, and cobalt.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. Alloy C-276 is frequently used in many industries, including chemical and petrochemical processing, oil and gas, power generation, pharmaceutical, pulp and paper production and waste water treatment. End use applications include stack liners, ducts, dampers, scrubbers, stack gas reheaters, heat exchangers, reaction vessels, evaporators, transfer piping and many other highly corrosive applications.

Prefabrication can be of many different types and undertaken at many different scales, from fabrication of small components and sub-assemblies through to large welded and bolted assemblies requiring significant logistical challenge to transport to site

HASTELLOY C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents such as ferric and copper chlorides, hot fouling media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and Seawater and brine solutions. It can be used in flue gas desulfurization systems due to its excellent resistance to sulfur compounds and chloride ions in most scrubbers.

Applications in the chemical process industry involving sulfuric, phosphoric, hydrochloric and acetic acid.

C276 Elbow has excellent corrosion resistance to a wide range of concentrated hot acids and reducing environments and can be easily used in hot sulfuric and hydrochloric applications.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition. Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

Hastelloy C276 material is designed with good mechanical properties. They have a minimum tensile strength of 601Mpa and a minimum yield strength of 204Mpa. This material makes the alloy easy to machine and elongate.

Hastelloy B3 Flanges are also being offered in customized sizes, and shapes to our valuable clients.

HASTELLOY C276 is not prone to grain boundary precipitation in the as welded condition and therefore suitable for many chemical process applications.

Hastelloy UNS N10276 sheets that are ideal for various sectors and meet our clients’ needs. We manufacture ASTM B575 Hastelloy C-276 plates in a variety of sizes and specifications.

Hastelloy B2 EFW Pipes is highly resistant to all concentrations and temperatures of hydrochloric acid.

Plates are designed by continuous rolling and casting or, in most instances, steel is processed into a bullet then hot rolled to be shaped in its final plate thickness. Akin to steel plates, rolled ring forgings are forged in the same process ¨C it differs only in terms of rolling directions.
For cups having comparative large thickness and plates having
complicated cross-sectional shapes, plate forging is more useful than billet forging due to due to
comparatively small change in shape.

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

Hastelloy C276 Plates, which has excellent corrosion resistance in reducing environments. Inconel C276 Plates is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.