Hastelloy C276 Round Head Bolts with excellent corrosion resistance and good fabricability

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Built-up sections are produced at the factory and is then transported to the original site and assembled. This concept is generally used to build Metro stations, industrial units, warehouses, etc.

Hastelloy C2000 lap joint flanges are used for heat treatment applications. They have very little carbon content and high nickel content, which makes them much stronger than any other flanges.

Hastelloy B3 is a nickel-molybdenum alloy with profound resistance to stree-corrosion cracking, pitting, corrosion and thermal stability greater to that of alloy B2.

Brushing these boards with stainless steel wire after the welding operation usually removes the hot color and likewise creates surface areas that do not require additional pickling.

C22 has excellent resistance to chloride-induced localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking.

Inconel Alloy X750 Flanges, which has excellent resistance to chloride ion stress-corrosion cracking. Inconel X750 Slip On Raised Flanges is used for wire formulation with heat temper used in springs at elevated temperatures

C-276 alloy has excellent resistance to pitting and to stress-corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

Superalloys have good oxidation and creep resistance and can be strengthened by methods such as precipitation hardening, solution hardening and work hardening. They can also function under high mechanical stress and high temperature and where high surface stability is required.

Hastelloy C-2000 Fastener, also known by many as Alloy C-2000, is a versatile nickel-chromium-molybdenum alloy with excellent resistance to stress corrosion cracking and pitting corrosion. The C-2000 fastener (UNS N06200) is unique among other Hastelloy alloys with approximately 1.6% copper added to its chemical composition. These properties make them ideal for applications such as heat exchangers and industrial reactors.

Hastelloy offer very good resistance to strong reducing and moderately oxidizing corrosive acids, as well excellent stress corrosion cracking resistance and resistance to localized attack.

The Hastelloy C276 round tube is manufactured from a high temperature heat resistant alloy, which contributes to its widespread use in the power industry. Whereas, Hastelloy C276 pipe exhibits outstanding properties such as high wear resistance, corrosion resistance and longer service life due to the raw materials used in its processing.

HASTELLOY X is a wrought nickel-based alloy with excellent high temperature strength and oxidation resistance. All product forms are excellent in forming and welding. Although HASTELLOY X is primarily known for its heat and oxidation resistance, it also has good resistance to chloride stress corrosion cracking and good carburization, as well as excellent resistance to reducing or carburizing atmospheres. Alloy X is one of the most widely used nickel-based superalloys for gas turbine engine components.

Hastelloy C276 Flanges are made up of the nickel chromium molybdenum alloy that is called hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus in it.

Pipe or tube is bent using a combination of dies and other various components working in a rotary action.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

These Hastelloy Alloy C276 Forgings is used for dissimilar welding applications including other nickel ¨C chromium ¨C molybdenum alloys and stainless steels, and for weld overlay or cladding of steels. The alloy is used in flue gas desulfurization systems. It has excellent resistance to pitting and stress corrosion cracking, and resists wet chlorine gas, hypochlorite and chlorine dioxide. The alloy is also resistant to seawater and brine solutions.

HASTELLOY C-4 alloy (UNS N06455) is the most (microstructurally) stable of the widely
used nickel-chromium-molybdenum materials, which are well known for their resistance
to many aggressive chemicals, in particular hydrochloric acid, sulfuric acid, and chlorides. This alloy resists the formation of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition.

As with most piping considerations, understanding the ideal uses for bent pipe in your design or project is essential to the proper operation of the finished system.

C22 can be hot worked or cold worked. However, C22 work-hardens rapidly. Therefore, cold working must often be performed in stages with intervening anneals. Parts should be annealed after cold working.

Hastelloy C22 fasteners are a general-purpose grade composed of chromium, nickel, molybdenum and tungsten alloys. These designs are designed to increase resistance to pitting, stress corrosion cracking (SSC) and crevice corrosion cracking. Alloy C-22 has excellent resistance to a variety of chemical process environments, including strong oxidizing agents such as ferric and cupric chlorides, chlorine, hot fouling solutions (organic and inorganic), formic and acetic acid, acetic anhydride, and seawater and Brine solution. C-22 alloy resists the formation of grain boundary precipitates in the weld heat affected zone and is therefore suitable for most chemical process applications in as-welded conditions.

Plates are designed by continuous rolling and casting or, in most instances, steel is processed into a bullet then hot rolled to be shaped in its final plate thickness. Akin to steel plates, rolled ring forgings are forged in the same process ¨C it differs only in terms of rolling directions.
For cups having comparative large thickness and plates having
complicated cross-sectional shapes, plate forging is more useful than billet forging due to due to
comparatively small change in shape.

The flange is second most used joining method after welding. Flanges are used when joints need dismantling. It provides flexbility for maintenance. Flange connects the pipe with various equiment and valves. Breakup flanges are adde din the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrelated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls ae required in the selection and application of all these elements to attain a joint, which has acceotable leak tightness.

These flanges are usually welded or screwed. In those instances where welding or bolting the flange is not possible, many industries prefer using WNR 2.4602 Threaded Flanges.

Hastelloy C22 weld neck flanges have the best resistance to pitting and stress corrosion cracking.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The alloy can be used in phosphoric acid and acetic acid and a range of organic acids. Hastelloy B2 alloy is having chloride induced SCC resistance.

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C-276 resists the formation of grain boundary deposits in the weld heat affected zone, making it a candidate material for most chemical and petrochemical processing applications in the as-welded state. The alloy resists general and localized corrosion, including pitting, crevice corrosion and stress corrosion cracking.

This alloy is exhibiting good corrosion resistance at aggressive reducing media like hydrochloric acid that range of concentrations and temperatures and in medium-concentrated sulphuric acid and with limited chloride contamination.