hastelloy c276 tube nickel alloy N10276 2.4819

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

These Seamless Pipes is nickel-base, where chromium imparts resistance to high temperature corrosion. The ease and economy with which the Welded Pipes can be fabricated, combined with good tensile, fatigue, creep, and rupture strength, it have resulted in its use in a wide range of applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Incoloy 800 Tubes are superalloys that are composed of a nickel-iron-chromium base and can resist both carbonization and oxidization in high temperature settings. Incoloy 800 Tubes are easy to fabricate, utilizing the same machines and processes as stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Nickel 201 Pipes that are low Carbon variation of Nickel 200, and with a low Carbon, content reduces the likelihood of intergranular erosion, for the most part, caused because of carbide precipitation amid pipe welding. Transportation of Phenol is generally helped through UNS N02201 Nickel 201 EFW Pipes. We supply Nickel DIN 2.4068 Tubes to the development and design industry, these funnels have a strong basic tough and go about as supporting edges, other than being impervious to soluble salt arrangements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Incoloy 909 Tube has a higher ferrous content and a lower overall cost of ownership. We offer quick responses to customer inquiries and specialize in the rapid delivery of both large and small quantities of Incoloy 909 Tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Although the properties of this particular specified inconel 625 Pipe is dependent on the heat treatment used and the dimensions which include the small diameter and light walled tubing. Each Inconel 625 Pipe or tube, as per the ASTM B444 specification must undergo hydrostatic testing.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

The Alloy 800H Tube has good machining characteristics as seen in iron-based alloy and they tend to work-harden during the machining process.

Alloy 600 Welded Pipe is a basic nickel chromium alloy for corrosive extraordinary heat requests.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Hastelloy B2 Seamless Pipes is a solid solution strengthened, nickel ¨C molybdenum alloy, typically used in extreme reducing conditions.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications.Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition.

Brushed Nickel Tubing is made in a dark color to help hide fingerprints on the tubing. These tubes are not as durable as stainless steel grades but offer superior performance. Nickel pipe price depends on grade, nominal pipe size and pipe thickness.

Controlling other alloying elements such as iron and chromium

La aleacion 20 contiene contenido de cobre que ayuda a proporcionar una excelente resistencia general a la corrosion. Debido a su resistencia a las picaduras, la corrosion por grietas y la corrosion, la aleacion de acero inoxidable se usa ampliamente para fabricar equipos de decapado, tuberias de proceso, intercambiadores de calor y tanques de fabricacion.

A benefit of using Incoloy 800 is its stability at elevated temperatures. This nickel-iron-chromium alloy can maintain its austenitic microstructure despite the Incoloy 800 Pipe being exposed to elevated temperatures. According to specification ASTM B407, these pipes are annealed for 15 minutes at a temperature of 1800¡ãF. After annealing, the Alloy 800 Seamless Pipe is cooled in air.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Incoloy Alloy 601 Tubing can use in carburizing equipment, heating-element sheathing, process piping, heat exchangers, nuclear steam-generator tubing, and Incoloy Alloy 601 Tubing can be used in heat-treating equipment, chemical and petrochemical processing, power plants, industrial furnaces as well.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Nickel alloys of the MONEL series can also be used for pipes and tubes. MONEL Alloy 400 is a cost-effective option but can be hardened by hot or cold work, providing a very durable end product. It has been on the market for decades and is ideal for marine applications due to its resistance to seawater corrosion. It can also be used for heat exchanger piping and rocket applications.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel tube suppliers cold work nickel custom tubes after the welding operation to ensure the alloy has the best corrosion resistance. This is a mandatory or important requirement for nickel welded pipes, especially in the welded area and in the base metal during final heat treatment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.47

Hastelloy piping systems are widely accepted by plant operations management and maintenance experts who appreciate their toughness and ability to withstand corrosive fluids.

Hastelloy c276 thermoforming should be done in a temperature range between 1600¡ãF and 2250¡ãF (870¡ãC and 1230¡ãC), with the heavier parts heated to a minimum temperature of 2000¡ãF prior to forming. It is recommended to anneal the material after machining and should be done at a temperature between 2050¡ãF and 2150¡ãF, followed by a rapid quench in a protective atmosphere or a stirred reduction quench bath. To obtain a reducing quench bath, add 2% (by volume) ethanol or propanol to water.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.34

Monel 400 is a kind of corrosion resistant alloy with large dosage

Inconel Polished Pipe is typically used in applications where they are exposed to high temperatures. In the presence of high temperature, a thick, stable passivating oxide layer is formed when Inconel Steel Pipe is heated.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

High performance nickel alloys for sour oil and gas fields. ASTM B407/B358 Incoloy 800 pipe-hardened nickel-based alloys and cold-worked solid nickel-based alloys offer many advantages, such as high strength, toughness, low magnetic permeability, and excellent corrosion resistance. ASTM B407/B358 Incoloy 800 pipe has proven to be a valuable and versatile material that can solve a variety of design and application problems. ASTM B407/B358 Incoloy 800 pipe resists low temperature aggressive corrosive environments as well as harsh high temperature environments. This alloy has excellent weldability and is able to join very successfully with other alloys with different compositions.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

This makes them ideal for use in heat exchangers in chemical processing, for example, which rely on pipes that can withstand high temperatures and corrosive environments. Nickel-based tubing is also used in steam generators, aircraft systems, and oil and gas extraction. To meet the demand for these high-quality products, there is a considerable selection of nickel alloy pipes and tubes on the market.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

It is used in high stress applications at elevated temperatures. The Inconel 625 Tube can be used in heat exchangers, condensers and in boiler components for this reason.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

Welding Inconel 3″ Pipe is not necessarily more difficult to weld than stainless, just different. By following the welding procedures outlined in the header construction tips article, successful welds with Inconel 3″ Pipe are possible.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.