Hastelloy C276 UNS N10276 ASTM B575 plate

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

These Hastelloy B2 Slip On Flanges can be machined using all the traditional machining methods. More than most other metals of similar chemistry, our Hastelloy B2 Spectacle Blind Flanges offers superior protection against powerful chemical corrosion and comes with one of the best high ¨C temp strengths of any steel.

Hastelloy 276 bolts and fasteners are suitable for most chemical applications in the welded condition. However, it should be noted that in environments where C-276 alloy weld joints are subject to attack, C-22 weld filler material should be considered. Hastelloy C276 socket head cap screws also have excellent resistance to pitting corrosion, stress corrosion cracking and oxidizing atmospheres up to 1900¡ãF.

Hastelloy B2 resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition. The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.
Alloy B2 also has excellent resistance to pitting and stress corrosion cracking.Steel pipes can be disintegrated on the basis of its application.Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes ,tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

This alloy of flanges ensures excellent formability and weldability. Therefore these are cold and hot worked.

The high content of chromium offers good resistance to oxidizing media while the molybdenum and tungsten content in the Hastelloy B3 Pipe Flanges provides the alloy with good resistance to corrosion in reducing media.

Hastelloy C276 ASTM Standard B575 Plate is a nickel-molybdenum-chromium superalloy with an enhancement of tungsten made to have superb deterioration resistance in a wide variety of extreme atmospheres.It is the chemical composition of the material that permits the Hastelloy C276 Sheet to perform well despite exposure to elevated temperatures.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding

Hastelloy B3 Long Weld Neck Flanges by definition contain at least 10 percent chromium.

Nickel alloys provide high resistance to a wide variety of corrosive agents, oxidation and excellent performance at high temperatures.Certain Nickel Alloys are better for high temperature applications, while others do a better job with corrosion resistance.

This action draws the pipe or tube forward making the desired bend.

Nickel Alloy C-276 and Hastelloy C-276 can be welded by all common welding methods (oxyacetylene is not recommended).

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Hastelloy B2 pipe bend resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition.

Hastelloy C22 bar contains a high amount of nickel-molybdenum-chromium superalloy as well as tungsten and is designed to provide excellent corrosion resistance in a wide range of harsh environments. It is very resistant to corrosion in immersion environments and is used for chemical applications in the as-welded state.

The exceptional corrosion resistance of C22 has promoted its use in many different markets wherever harsh environments are encountered, including the chemical process, pharmaceutical, food processing, oil and gas, power generation, and the paper industries.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

Prefabrication is the practice of assembling components of a structure in a workshop or other assembly facility before transporting to site for erection.

Hastelloy B2 EFW Pipes is highly resistant to all concentrations and temperatures of hydrochloric acid.

Hastelloy C-276 fasteners and other products in the Hastelloy family have excellent resistance to corrosion and oxidizing and reducing chemicals. Due to its adaptability, Hastelloy C-276 alloy can be used in problem areas and is more likely to occur in process areas. In Hastelloy C276 hex bolts, the chromium content is increased to about 21% and the molybdenum content is reduced to about 13%. Hastelloy C276 Heavy Duty Hex Bolts also provide optimum resistance to environments encountered in reducing and oxidizing conditions in the process stream.

In Hastelloy C276 hex bolts, the chromium content is increased to about 21% and the molybdenum content is reduced to about 13%. Hastelloy C276 Heavy Duty Hex Bolts also provide optimum resistance to environments encountered in reducing and oxidizing conditions in the process stream. Due to the use of experienced qualified professionals and the latest technological machinery.

Hastelloy is a term used to describe nickel metal that has been alloyed to increase corrosion resistance. This is primarily done through the addition of molybdenum and chromium.It is commonly used for pipes and valves in the chemical and petrochemical industries. It is also used in reactor vessels in the chemical and nuclear industries.

The tungsten element of Hastelloy C276 pipe makes it suitable for this welding, Hastelloy C276 seamless pipe can be easily welded to other objects.

Hastelloy B3 Threaded Flange (UNS N10675) has great resistance to knife ¨C line and heat ¨C affected zone attack. Hastelloy B3 Slip On Flange has a special chemistry designed to achieve greater thermal stability than B-2 alloy, resulting in easier fabrication. Hastelloy B3 Spectacle Blind Flanges have good creep and oxidation resistance.

As most bent pipes do not alter the ends of the piping, pipe bends are often easy to implement within a processing system using standard welding processes, flanges, or other connection methods.

Hastelloy C276 boards can be easily welded using the most traditional processes. In general, 2.4819 Hastelloy C276 Coil does not require post weld heat treatment. Brushing these boards with stainless steel wire after the welding operation usually removes the hot color and likewise creates surface areas that do not require additional pickling.

Hastelloy X flanges are high-performance chromium-nickel iron molybdenum super alloy flanges that possess superior corrosion resistance consistency and durability.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy B3 studs are suitable for all applications that previously required the use of Hastelloy B2 alloy. Due to the enhanced thermal stability of Hastelloy B3 square bolts, the problems associated with manufacturing Hastelloy B2 parts are reduced.

Hastelloy C-276 alloy excellent resistance to a wide variety of chemical process environments such as chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions.