Hastelloy G-30 8mm threaded pipe ansi 150 rf 5inch 150lb high hub blind flange

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

The outstanding oxidation resistance of HASTELLOY X pipe bend is illustrated below. Tests were conducted by exposing samples to dry air at 2000 Deg. F. and to dry air pressurized to 300 psi at 1750 Deg. F.

Hastelloy C22 Flanges are a technique used by many industries in the connecting of pipes, valves, pumps and other equipment, into what is referred to as a piping system.

ASTM B619 UNS N10276 Alloy C276 Tube covers 2 classes under this specification. In class 1, the Hastelloy C276 Tube is furnished in an as welded and solution annealed condition or these tubes could be welded along with being sized and solution annealed.

Hastelloy C276 is a nickel-chromium-molybdenum wrought alloy considered to be the most versatile corrosion-resistant alloy known. This alloy is resistant to grain boundary deposits in the weld heat affected zone, making it suitable for most chemical process applications in the as-welded condition. Meanwhile, Hastelloy C276 fasteners are considered to be the most versatile and high-strength fasteners, finding their suitability in many industrial applications. These are nickel-molybdenum-chromium forged alloy fasteners that perform well in a variety of harsh environments. The presence of molybdenum and chromium content makes nickel alloy steel more resistant to crevice and pitting corrosion. Hastelloy c276 bolts are the highest quality bolts in the alloy series. These are corrosion resistant, which is important for the industries in which Hastelloy is best suited.

Chemical processing plants use high-end, high-precision tubing, such as Ni C276 hot-worked tubing. There are also resistance welded pipes. Hastelloy C276 Alloy EFW Tubing is easy to use. It can be welded without much precipitation. This feature helps the material retain its shape and not corrode even after applying field welding.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

Hastelloy C276 alloy, UNS N10276, 2.4819, is the most widely used and versatile corrosion resistant nickel alloy.

Hastelloy C-2000 Fastener, also known by many as Alloy C-2000, is a versatile nickel-chromium-molybdenum alloy with excellent resistance to stress corrosion cracking and pitting corrosion. The C-2000 fastener (UNS N06200) is unique among other Hastelloy alloys with approximately 1.6% copper added to its chemical composition. These properties make them ideal for applications such as heat exchangers and industrial reactors. Hastelloy C2000 fasteners combine the excellent resistance to oxidizing media of C276 with excellent resistance to non-oxidizing environments, making it a unique alloy for protecting chemical process equipment under a variety of conditions, including fluids contaminated with iron ions .

Hastelloy DIN NR. 2.4819 Pipe is a nickel based superalloy. Apart from its primary base alloying element, the alloy for Hastelloy C276 Pipe also contains elements molybdenum & chromium, which results in the alloy gaining certain properties.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition. Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

The pipes are having good stress corrosion cracking and pitting resistance ability.

C22 has excellent resistance to oxidation, carburization, and sulfidation at elevated temperatures. However, C22 should not be used at temperatures above 1250¡ãF due to the possible formation of embrittling phases.

Pipe or tube is bent using a combination of dies and other various components working in a rotary action.

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

HASTELLOY B-2 ALLOY. A nickel-molybdenum alloy with outstanding resistance to hydrochloric and sulfuric acids in the as-welded.Hastelloy B2 is a nickel-molybdenum alloy with significant resistance to reducing environments.

It is used in chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment and the recovery of ¡°sour¡± natural gas.

Alloy X pipe bend is equally suitable for use in jet engine tailpipes, afterburner components, turbine blades, nozzle vanes, cabin heaters, and other aircraft parts.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

These are available in different types and grades such as Monel 400 Forged Threaded Elbow, Nickel 200 Forged Threaded Equal and Unequal Tee, Inconel 600 Threaded Equal and Unequal Cross, Incolloy 800 Threaded Half and Full Threaded Fittings, UNS S4400 Threaded Reducers, UNS S2201 threaded caps, Hastelloy C276 threaded reducing inserts, etc.

The exceptional corrosion resistance of C22 has promoted its use in many different markets wherever harsh environments are encountered, including the chemical process, pharmaceutical, food processing, oil and gas, power generation, and the paper industries.

Alloy C-276 is also defined as Alloy C276, Inconel C 276 or Hastelloy C, which is a superalloy with a perfect combination of molybdenum, nickel and chromium. Tungsten is added, which is designed to provide excellent corrosion resistance even in harsh environments.

Built-up sections are produced at the factory and is then transported to the original site and assembled. This concept is generally used to build Metro stations, industrial units, warehouses, etc.

Alloy X pipe bend offers exceptional performance in furnace rolls or other industrial furnace applications because of the alloy’s strong resistance to oxidizing, reducing and neutral atmospheres.

The corrosion resistance property of the alloy is credited to the addition of both Molybdenum and nickel.

Hastelloy C-276 is a nickel-molybdenum-chromium-tungsten alloy with excellent general corrosion resistance and good machinability. The alloy should be considered for use in environments requiring resistance to thermally contaminated inorganic acids, organic and inorganic chloride-contaminated media, chlorine, formic and acetic acids, acetic acid, acetic anhydride, seawater and brine solutions.

These have the advantage of nickel and molybdenum providing resistance against the most reducing environments. The oxidation resistance is also high in these materials due to the addition of the chromium content.

Hastelloy B2 studs have poor corrosion resistance to oxidizing environments and are therefore not recommended for use in oxidizing media or in the presence of iron or copper salts as they may cause rapid premature corrosion failure.

Hastelloy C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents (such as ferric chloride and cupric chloride), hot fouling media (organic and inorganic), chlorine, formic and acetic acid, acetic anhydride, and Seawater and brine solutions.

This alloy is exhibiting good corrosion resistance at aggressive reducing media like hydrochloric acid that range of concentrations and temperatures and in medium-concentrated sulphuric acid and with limited chloride contamination.

B3 Hastelloy Flanges has some excellent features to offer like fine finish, accurate range, and durable.