Hastelloy G30 round rod corrosion resistant

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

We are a manufacturer, trader, stockist, supplier, and exporter of ASTM B564 Hastelloy B2 Flanges that are known as ‘High-performance Flanges’ for their Nickel-Molybdenum combination, alloyed with a lower content of Iron, Silicon and Carbon, which makes them adept in administering control over the conveyance of reducing acids at higher temperatures.

Hastelloy B2 fasteners are primarily used for excellent resistance to reducing environments such as hydrogen chloride gas, sulfuric acid, acetic acid and phosphoric acid. Like other Hastelloys, B2 fasteners can be used in the as-welded condition because they resist the formation of grain boundary carbide deposits in the weld heat-affected zone. Due to reduced ductility, B2 fasteners are not recommended for use between 1000¡ãF and 1600¡ãF.

Hastelloy B3 is molybdenum and nickel alloys family additional member with greater hydrochloric acid resistance at various concentrations and temperatures. It is withstanding formic, sulphuric and phosphoric acid as well as non-oxidizing acids.

The Hastelloy stainless steel plates are having low-carbon they can also withstand to the corrosive effect of the wet chlorine gas, hypochlorite and chlorine dioxide.

The flanges also have 8.89 grams per cubic centimeter density and 1370 degrees melting point. The DIN 2.4617 Socket Weld Flanges and other flanges are used in high temperature, high corrosive and high stress applications due to the higher mechanical properties.

Hastelloy B3’s distinguishing characteristic is its ability to maintain good ductility while transient exposure to intermediate temperatures.

Hastelloy Nickel Alloy B2 is a very chemically resistant alloy with high resistance to pitting and stress corrosion cracking in the heat affected zone.

Alloy 22 (UNS N06022) is the most versatile Nickel Chromium Molybdenum Tungsten alloy with controlled Iron. Due to Alloy 22’s content this alloy exhibits excellent resistance to both oxidising and reducing acid environments as well as those containing mixed acids.

Hastelloy C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents (such as ferric chloride and cupric chloride), hot fouling media (organic and inorganic), chlorine, formic and acetic acid, acetic anhydride, and Seawater and brine solutions.

Hastelloy B3 has excellent resistance to hydrochloric acid at all concentrations and temperatures. In addition, it greatly improves structural stability compared to previous B-type alloys, reducing concerns during welding, fabrication and service.

HastelloyB2 is a nickel-based wrought alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures. Therefore, it has strong resistance to stress corrosion cracking and pitting corrosion. It is also resistant to hydrogen chloride, sulfuric acid, acetic acid and phosphoric acid. Hastelloy B-2 is a grade of Hastelloy?, a nickel-molybdenum alloy. There are many different grades of Hastelloy?, including B-2. Hastelloy? grades are optimized for specific applications. molybdenum

This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition.

Incoloy alloy is applied as the prefix name to several highly corrosion resistant high temperature strength metal alloys produced by Special Metals Corporation. Nickel alloys are excellent for heat exchangers in the chemical processing and nuclear industries. They’re used in steam generator tubing in the nuclear power industry, in high-temperature aircraft systems, and in oil and gas extraction programs where corrosion-, pressure- and temperature-resistant tubing is required

Hastelloy C22 Spectacle Blind Flanges is also in a wide variety of hazardous waste management technologies where high corrosion ¨C resistance of critical equipment is required for reliability, safety, and cost effectiveness / reduced maintenance.

The pipes are having good stress corrosion cracking and pitting resistance ability.

C276 is forged between 2250/1750oF (1230/955oC) and then soaked at the forging temperature for 30 minutes per inch of billet or ingot section thickness. Forging should begin immediately, the billet is removed from the reheat furnace, a 25/40% reduction helps retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.

Hastelloy B2 Seamless Pipes is a solid solution strengthened, nickel ¨C molybdenum alloy, typically used in extreme reducing conditions.

Hastelloy C-276 bushings are also used in sour gas wells, pulp and paper production, waste disposal, pharmaceutical and food processing equipment. Other important properties of this alloy Nickel Alloy C-276 and Hastelloy C-276 include its resistance to oxidizing agents.

INCONEL alloy C-276 (UNS N10276/W.Nr. 2.4819) is known for its corrosion resistance in a wide range of aggressive media.

Hastelloy C22 threaded flanges have the best weldability.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Pipe or tube is bent using a combination of dies and other various components working in a rotary action.

Hastelloy X Bolts have been widely used in combustion zone components of turbine engines such as transition ducts, combustion chambers, booms and flame holders, as well as afterburners, exhaust pipes and cabin heaters. This alloy is recommended for industrial furnace applications due to its unusual resistance to oxidation, reduction and neutral atmosphere.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

Alloy C-22 should not be used in service temperatures above 1250¡ã F due to the formation of detrimental phases which form above this temperature.

The sheer variety of pipe bend sizes and materials also make them suitable for routing everything from hot or caustic liquids to maintaining pressure and movement in high viscosity liquids or those with suspended solids, such as Oil Sands slurry lines which contains a high concentration of silica sand.

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

Prefabrication can be of many different types and undertaken at many different scales, from fabrication of small components and sub-assemblies through to large welded and bolted assemblies requiring significant logistical challenge to transport to site

Hastelloy G30 is a combination of nickel, chromium, iron, cobalt, molybdenum, tungsten and manganese. Hastelloy G30 is primarily used to provide high resistance to chemical conditions. Hastelloy G30 is a high performance alloy with surface stability at high temperatures. In the welded form, the corrosion resistance is also carried over. Hastelloy G30 fasteners are highly ductile. Hastelloy G30 resists deformation at high temperatures. Hastelloy G30 is used in applications requiring high corrosion and deformation resistance. Using cold working, these fasteners are hardened. These fasteners have high oxidation resistance.

Hastelloy can be used with all common welding methods, but oxyacetylene and submerged arc processes are not recommended when the manufactured product is intended for corrosion service.