Hastelloy X pipe bend UNS N06002 pipe fittings for Aircraft cabin heaters and Turbine exhaust components

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

C276 is a nickel-molybdenum-chromium superalloy with tungsten added, designed for excellent corrosion resistance in a variety of harsh environments. The high nickel and molybdenum contents make nickel steel alloys particularly resistant to pitting and crevice corrosion in reducing environments, while chromium is resistant to oxidizing media.

They combine the outstanding resistance to the oxidizing medium of Hastelloy C276 with superior resistance to non-oxidizing situations.

HASTELLOY X pipe bend finds use in petrochemical process equipment and gas turbines in the hot combustor zone sections. Also used for structural components in industrial furnace applications because of the excellent oxidation resistance.

Alloy C276 Coils are often used in Pollution control, chemical processing, Waste treatment, Marine engineering, Pulp and paper production, and more.

INCONEL alloy C-276 is designated as UNS N10276 and Werkstoff Nr. 2.4819. It is listed in NACE MR0175 for oil and gas service.

Hastelloy C-276 fasteners and other products in the Hastelloy family have excellent resistance to corrosion and oxidizing and reducing chemicals. Due to its adaptability, Hastelloy C-276 alloy can be used in problem areas and is more likely to occur in process areas. Hastelloy 276 bolts and fasteners are suitable for most chemical applications in the welded condition. However, it should be noted that in environments where C-276 alloy weld joints are subject to attack, C-22 weld filler material should be considered.

B3 Hastelloy Flanges has some excellent features to offer like fine finish, accurate range, and durable.

Alloy C-22 should not be used in service temperatures above 1250¡ã F due to the formation of detrimental phases which form above this temperature.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C22, also known as alloy C22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking.s. It is available in the form of plates,
sheets, strips, billets, bars, wires, pipes, tubes, and covered electrodes.

It is used in chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment and the recovery of ¡°sour¡± natural gas.

Hastelloy alloy C22 socket weld flanges have excellent resistance to reduce and oxidizing media. It also helps to resists the formation of grain-boundary precipitates in the heat-affected zone.

Used when large radius bends or curves are required, this method passes a piece of pipe or tube through a series of three rollers in a pyramid configuration to achieve the desired curve.

Super alloys are also known as high performance alloys. They contain many elements in a variety of combinations designed to provide unique material properties for specific applications.

Prefabricated steel s take advantage of offsite prefabrication to improve the speed or erection and cost predictability of the solution.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

Hastelloy C276 Plates, which has excellent corrosion resistance in reducing environments. Inconel C276 Plates is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.

Hastelloy C276 Welded Pipe is ideal for chemical process applications in the as-welded condition. By adding tungsten to ASTM B622 UNS N10276 alloy C276 pipe, its corrosion resistance becomes superior.

Alloy C276 Forged Flange Hastelloy C276 Flanges are made up of the nickel chromium molybdenum alloy that is called hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus in it. The Hastelloy C276 Flanges have high melting point of 1370 degrees Celsius. This high melting point allows for higher operating temperatures of the flanges. The material also has 790MPa minimum tensile strength and 355MPa minimum yield strength.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

c276 is highly resistant to most chemicals and corrosive environments. The anti-corrosion and anti-oxidative properties come from the composition of chromium and molybdenum.

Hastelloy C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents (such as ferric chloride and cupric chloride), hot fouling media (organic and inorganic), chlorine, formic and acetic acid, acetic anhydride, and Seawater and brine solutions.

The exceptional corrosion resistance of C22 has promoted its use in many different markets wherever harsh environments are encountered, including the chemical process, pharmaceutical, food processing, oil and gas, power generation, and the paper industries.

Hastelloy B3 suppliers and Hastelloy B3 manufacturers can be reached out to all over the country.

Hastelloy B3 Lap Joint Flanges has a special chemistry designed to achieve a level of thermal stability greatly superior to that of its predecessors, e.g. B2 alloy.

Hastelloy X is a nickel-chromium-iron-molybdenum alloy. It has excellent oxidation resistance, workability and high temperature strength. It also exhibits good resistance to stress corrosion cracking in petrochemical applications. It shows very good ductility after prolonged exposure at 1200 to 1600 degrees Fahrenheit. It has excellent forming and welding properties, and is widely used in furnaces for aircraft and gas turbines.

Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to which the austenitic stainless steels are prone).

INCONEL C-276 alloy has excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions.

HASTELLOY C-2000 alloy is available in the form of plates, sheets, strips, billets, bars, wires, pipes, tubes, and covered electrodes. Typical chemical process industry (CPI) applications include reactors and heat exchangers.

Machining of Hastelloy UNS N10276 polished plates is best done in the annealed condition. Since this particular alloy grade is prone to work hardening, only low cutting speeds are required.