hastelloy x tube of high quality in China

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel 201 has excellent corrosion resistance, high electric vacuum performance and electromagnetic viewing performance, and is widely used in chemical, mechanical and electronic, food and other fields. Pure nickel has excellent welding performance and processing performance, and can be processed into pipe, rod, wire, strip, and foil products.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

ERW steel pipes are manufactured by low frequency or high frequency electrical resistance “resistance”. They are round tubes welded from steel plates with longitudinal welds. It is used to transport vapor-liquid objects such as oil and natural gas, and can meet various high and low pressure requirements. At present, it occupies a pivotal position in the field of transportation pipelines in the world.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

Industrial name of inconel 600 are alloy 600, inco 600, nickel 600.

La resistencia a la corrosion de los accesorios de aleacion 20 es muy buena. Puede funcionar ininterrumpidamente a altas temperaturas. Tenemos una instalacion de produccion facil de usar. Para fines de produccion, nuestra empresa adopta excelentes metodos y tecnicas de procesamiento.

One of our products is Alloy Steel A335 P91 Pipe. We supply Alloy Steel A335 P91 Pipe in different thicknesses and sizes to successfully meet the prerequisites identified by the customer. We offer these alloy steel A335 P91 pipes with excellent integrity, dimensional accuracy, high caliber and reasonable cost.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

On the other hand, the class 2 Hastelloy C276 Welded Tubing produced according to the ASTM B619 specification is welded, cold worked and is furnished in a solution annealed condition.

La tuberia sin costura ASTM B167 inconel 600 es menos resistente a las soluciones oxidantes fuertes, como el acido nitrico concentrado calentado.

Incoloy 800 is a nickel-iron-chromium alloy. The alloy’s higher creep rupture strength is a result of the aluminum, carbon, and titanium content. In addition, Incoloy 800 has good corrosion resistance in sour environments, as well as oxidation and carburization resistance in high temperature environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

Another difference between Astm B626 Nickel Alloy C276 Welded Pipe and Alloy C is that Alloy C276 pipe has better machinability.

Inconel Alloy 600 Pipes has a larger pressure fast resistance in condensation group nuclear devices for piping, centrifuges and weldments.

ASTM B619 welded pipe for the pharmaceutical industry has good corrosion resistance, especially to high purity water. And they also show good resistance to corrosion by buffer solutions used to prepare pharmaceuticals if ASTM B619 UNS N10276 is also exposed to cleaning supplies.

Talking about the general properties exhibited by Incoloy 800 grades, Incoloy 800/800H/800HT pipe exhibits excellent corrosion resistance, pitting resistance in chloride environments, resistance to various acidic environments, good general corrosion resistance, flow resistance Grain alloy crack corrosion, crevice corrosion resistance and easier weldability and hardness.

800H can not be corroded in many kinds of media. Its higher nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High chromium content made it better resistance to pitting and crevice corrosion cracking. This alloy can resist nitric acid and organic acid, but it is not so fine in the sulfuric acid and hydrochloric acid.
800H have good corrosion resistance to both oxidation and non-oxidizing salt, but maybe a little pitting in halide, and also excellent properties in the mixture of water, smoke, steam, air and carbon dioxide.

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Incoloy 800 Tubes are superalloys that are composed of a nickel-iron-chromium base and can resist both carbonization and oxidization in high temperature settings. Incoloy 800 Tubes are easy to fabricate, utilizing the same machines and processes as stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Inconels are a class of nickel-chrome-based super alloys characterized by high corrosion resistance, oxidation resistance, strength at high temperatures, and creep resistance. Inconel is able to withstand elevated temperatures and extremely corrosive environments due to two factors.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

Technically, Inconel alloy ERW Pipes are resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at both normal temperature and elevated temperatures. Inconel Pipes has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Alloy 718 for aerospace and power generation is heat treated to give maximum strength and high creep resistance with typical hardness values exceeding 42HRC. The major applications are components for gas turbines, aircraft engines, fasteners and other high strength applications.

Inconel 625 is an austenitic steel. These pipes are designed with high-quality nickel, chromium and molybdenum compositions, enabling the pipes to carry fluids and gases in corrosive and oxidizing media.

Inconel 625 Tube may be furnished bare or coated and with capped ends. tubes up to 3¡± OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Incoloy Seamless Tubes may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3¡± OD will be supplied loose.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

The Alloy 800H Tube has good machining characteristics as seen in iron-based alloy and they tend to work-harden during the machining process.

These tubes have a yield strength between 30 to 60ksi and can be readily elongated by 60-30% in the system.

The Inconel alloy pipes resists getting sensitized by grain boundary precipitates and in turn, is resistant to intergranular corrosion. This is an effect of the presence of titanium and the corresponding heat treatment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Incoloy 800H/HT alloy is used for high temperature structural applications. The nickel content makes the alloy highly resistant to chloride stress corrosion cracking and embrittlement from sigma-phase precipitation. Overall corrosion resistance is excellent. Alloys 800H and 800HT have excellent creep and stress rupture properties under solution annealed conditions.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Excellent resistance of Incoloy Alloy 825 Tubing to seawater, brine, sour gas and high chloride environments make it a popular choice in the oil and gas industries. The most specialized Incoloy Alloy 825 Tubing, however, are widely used in the harshest chemical environments of all, involving among others, acids, wet scrubbing, nuclear fuel and the reactive atmospheres of furnaces.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.