heat pipe solar water heater 316 sus S31600 1.4404 / 1.4435 pipe

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

The austenitic structure of 316 stainless steel provides excellent toughness even at low temperatures.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

ASTM A276 Type 316Ti is a material grade specification for 316Ti stainless steel cold-worked or hot-worked bar in round, square, hexagonal, and other hot-rolled extruded shapes. Alloy 316Ti studs do show surface corrosion, usually as a brown staining, which is particularly relevant for cracks and rough surface finish. The low thermal conductivity of austenitic alloys such as 316Ti studs causes heat to concentrate on the cutting edge, which means that coolants and lubricants are required and must be used in large quantities.

Although the welding characteristics of Inconel 718, especially its resistance to post-weld cracking tend to be outstanding. Similar to other Inconel alloy grades, Inconel 718 plate forms a binder on its surface when the material is heated, but self-repairs the passivating oxide layer. The room temperature strength of ASTM B670 Inconel 718 sheet can be significantly increased using a precipitation heat treatment method.

Duplex 2205 round steel contains 22% chromium, 3% molybdenum, and 5-6% nickel. In addition to excellent impact toughness and high strength, it also has high general, local and stress corrosion resistance.

The ASTM A790 Duplex Welded Pipes are an example of welded duplex pipe. There are different grades of duplex pipes with different mechanical properties. There are duplex, super duplex and lean categories in the Duplex Pipes varieties. The Seamless Duplex Pipes are both strong and is highly corrosion resistant.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Our clients use 309 Stainless Steel Countersunk Bolts when a flat surface is needed, usually in securing steel plates to a roadway or bridge deck during rehabilitation, railings etc.

Hastelloy offer very good resistance to strong reducing and moderately oxidizing corrosive acids, as well excellent stress corrosion cracking resistance and resistance to localized attack.

Inconel 718 studs and other fasteners have different types of threads. Available in BSW, UNC, BSF, UNF, Metric or others as required.

This flange contains a small amount of niobium to improve the weldability of the flange, has a minimum yield strength of 15 ksi and is moderately tough.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

About 304 304L 304H pipe, stainless steel pipe is the lightest product and has structural support due to its versatility. This grade type is mainly ordered by customers. It has comparable strength, seamless design and machinability. Stainless steel has many beneficial properties such as corrosion resistance, ductility, high strength, etc. It has good thermal and electrical conductivity.

Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition.

Stainless Steel pipe and tube is available in many different grades and finishes. The most common grades are type 304/304L and type 316/316L. Some of the more exotic grades are type 304H, type 309 and 309H, type 310 and 310H, type 317, type 321 and type 347. And Duplex Stainless grades are type 2205 and 2507
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

304 stainless steel is part of the austenitic steel family. One of the disadvantages of austenitic steels is that they cannot be hardened by heat treatment. In addition to this, 304 is a versatile stainless grade that can be drawn and formed easily. Hardness and strength can be increased by cold working. Good ductility in the annealed state. Additionally, 304L exhibits excellent corrosion resistance due to its ultra-low carbon composition.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.21

Nuts are attached to corresponding bolts or rods to secure items. Cap nuts protect the threads of fasteners by preventing them from protruding. The locknut and locknut are locked on the bolt to prevent loosening. Thumb nut and wing nut are manually adjustable. The connecting nut is an extension for connecting two threaded rods.

A typical AL-6XN weld has non-uniform freeze lines and oxide islands in the weld bead. These oxide islands appear as a thin film, having a varying color with tints from gray to dark brown that adhere to the surface.

This nickel-copper alloy is precipitation hardenable due to the addition of aluminum and titanium. It combines the corrosion resistance of Monel 400 with the added benefits of superior strength and hardness (derived from its age-hardenability). Monel K-500 is also known for its ease of fabrication compared to other superalloys, and the fact that it is essentially nonmagnetic even at low temperatures.

This is called as the “center to face” distance and is equivalent to the radius through which the ASTM A234 gr WPB elbow is bent.

Grade 304 is an austenitic steel with excellent welding and forming properties. These stainless steels are widely used in the petrochemical and food industries for their corrosion resistance, tensile strength and ability to withstand higher temperatures. Depending on the specific grade, there is a compromise between corrosion resistance and temperature characteristics.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.38

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

309 stainless steel is a type of austenitic stainless steel that is often used in high-temperature applications due to its excellent heat resistance. SA240 309 plate contains a high percentage of chromium and nickel, which gives it good corrosion resistance, as well as a high degree of strength and durability. SS 309 Strip (UNS S30900) is an austenitic stainless steel developed for use in high temperature corrosion resistance applications. The SA240 309 plate resists oxidation up to 1900°F (1038°C) under non-cyclic conditions. Frequent thermal cycling reduces oxidation resistance to approximately 1850°F (1010°C).

Hastelloy fasteners such as bolts, screws, nuts and threaded rods are ideal for use in a variety of moderately to severely corrosive acid environments. The most common grade of Hastelloy fasteners is Hastelloy C276 (2.4819), which is one of the most versatile corrosion-resistant nickel alloys, surpassing Inconel or Monel. There are also other special grades of Hastelloy fasteners that can address more niche corrosion problems.

They combine the outstanding resistance to the oxidizing medium of Hastelloy C276 with superior resistance to non-oxidizing situations.

Alloy steel is divided into two categories: high-alloy steel and low-alloy steel. Low alloy steel forged fittings, on the other hand, contain about 0.05 ¨C 0.25% carbon and up to 2.0% manganese.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Alloy 800H/800HT is frequently used in applications that involve long-term exposure to elevated temperatures where resistance to oxidation, carburization and other types of elevated temperature corrosion is required.

The corrosion resistance of Monel alloy K-500 is subtantially equivalent to that of alloy 400 except that, when in the age-hardened condition, alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments.