hex bolt DIN931 933 S31803 1.4462 bolt

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

The duplex stainless steel grade alloy UNS S32750 Washer is a thin plate, which is typically produced in a disk -shaped, although sometimes square shaped with a hole i.e. sometimes present in the middle.

Duplex 2205 pipe is stainless steel. It belongs to a family of stainless steels called duplex steels. There are different groups of this material. This series of pipes can be cold drawn, hot rolled and welded. Alloy 2205 seamless tube is cold drawn, it has less absolute roughness.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.39

Duplex 2205 stainless steel plate has excellent corrosion resistance, much higher than grade 316. It can withstand localized corrosion types such as intergranular, pitting and crevice.

Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy.

The high chromium, molybdenum and nitrogen content of 2205 provides better corrosion resistance than common stainless steels such as 316L and 317L in most environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

Compared to 317L stainless steel, duplex steel has excellent resistance to chloride pitting and crevice corrosion. The alloy has excellent corrosion resistance to seawater and most concentrations of sulfuric acid. In addition, it is resistant to sulfide stress corrosion cracking (sour gas environments)

The 21% chromium content is the key to extreme corrosion resistance and strength of the SA 182 f51 flanges. HT PIPE is a leading supplier and manufacturer of the flanges in various scales, shapes and types.

Duplex 2205 was tested under reverse bending stress at room temperature compared to SS316. The results show that Duplex 2205 has approximately twice the fatigue limit/yield strength.

The most widely used stainless steel alloy is duplex 2205. It is also known as Duplex 2205 or Duplex 2205. It has ferritic and austenitic properties, making it ideal for environments with strong corrosion resistance. Good strength is a primary requirement. Duplex 2205 studs are essentially just a piece of threaded rod, in some cases, they are all designed to accept nuts, such studs are called stud bolts. It has excellent corrosion resistance and is superior to stainless steel 316 in most environments.

El uso de tuberias sin costura ASTM A790 UNS S32205 (sin costura y soldadas) es adecuado para aplicaciones generales, pero la solucion principal que brindan es el agrietamiento por corrosion relacionado con la tension.

Duplex describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase.

The advantage of combining ferritic and austenitic grades is that the resultant metal has a metallurgical structure that consists of two phases and therefore benefits from the properties of both microstructures. These properties make duplex steel highly sought after in heavy industries, like oil and gas nuclear and chemical processing.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2205 is the standard duplex grade and is more economical than most other duplex grades.

It reaches the phase balance of austenite and ferrite in roughly same volume fraction.

ASTM A479 Duplex Steel UNS S32205 Nuts have good weldability and can be welded by most common welding methods such as shielded metal arc welding, gas tungsten arc welding, plasma arc welding and submerged arc welding. Buy Duplex Stainless Steel Nuts from us at leading market prices.

Super Duplex 2507 Lock Washers has excellent corrosion resistance in marine environments.Lock washers are designed to be tightened to a required torque beneath an ordinary fastener. They exert a spring tension that keeps the fastener from vibrating loose. They are often attached to the nut side of the fastener.

Alloy 2205 UNS S32305/S31803 is a 22% chromium, 3% molybdenum, 5-6% nickel, nitrogen alloyed Duplex Stainless Steel Pipe with high general, localized, and stress corrosion resistance properties in addition to high strength and excellent impact toughness.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

As well as greater tensile and yield strength whilst still providing good ductility and resistance to stress corrosion cracking.

Applications for duplex 1.4462 coated studs are the oil and gas industry, marine industry, chemical industry, paper and pulp industry, etc. We offer Lean Duplex and Standard Duplex in a wide selection of duplex grades. Duplex 2205 studs have specific properties for different environments. The chemical composition of the duplex 2205 material has chromium, nickel and molybdenum in the composition. Duplex 2205 studs are cost-effective and lower than other duplex grades and are in high demand.

The duplex steels are one type of stainless steels that have ferritic and austenitic phases in their metallurgic microstructure.

Duplex steel UNS S31803, UNS S32205 round rods and wires are widely used in chemical, oil and gas, fertilizer and other application industries.

The notch ductility of SA 240 S32760 Sheet performs well at sub-zero temperatures, down to the -50¡ãC range, while performing well at ambient temperature.

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

Super Duplex Steel Pipes and Tubes are available in various dimensions, shapes like square, rectangle, and so on and enormous sizes. We are offering the standard quality of products of our customers. Our Product is offering excellent corrosion resistance and remarkable dimensional accuracy.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

S32760 is a super duplex stainless steel with a ferritic-austenitic microstructure.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

ASTM A182 Grade F51 is the standard duplex stainless steel and is also called ¡°duplex 2205¡± or ¡°alloy 2205¡±.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Duplex 2205 Tube may at times exhibit magnetic behavior because the microstructure of its alloy contains about 50% ferrite.

S32750 Seamless Pipes are chromium and molybdenum mixtures with high resistance to pitting. Many industries prefer these Seamless Pipes for their resistance to stress corrosion cracking and crevice corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”