High Performance Alloy Hastelloy C276 Bushing bearing

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Built-up sections are produced at the factory and is then transported to the original site and assembled. This concept is generally used to build Metro stations, industrial units, warehouses, etc.

Hastelloy C22 Threaded Flanges has outstanding resistance to both reducing and oxidizing media and because of its resistibility can be used where ¡°upset¡± conditions are likely to occur.

Bushings, also known as sleeve bearings, are just one specific type of bearing. They slide on the rod to provide extremely low friction movement. They are ideal for shock absorption and minimise energy consumption, noise and wear.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

It is used in flue gas desulfurizations systems because of its excellent resistance to sulfur compounds and chloride ions encountered in most scrubbers. C-276 alloy has excellent resistance to pitting and to stress- corrosion cracking.

It has great resistance to stress-corrosion cracking and pitting. Hastelloy B-2? also features hydrochloric acid resistance at all concentrations and temperatures.

Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C-276 is one of the most universally corrosion resistant alloys available today. It is used in a variety of environments ranging from moderately oxidizing to strong reducing conditions. Alloy C-276 has exceptional resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

They have good creep and oxidation resistance. Strengthening of super alloys is performed by solid-solution hardening, work hardening, and precipitation hardening methods.

Hastelloy B3 has excellent resistance to hydrochloric acid at all concentrations and temperatures. In addition, it greatly improves structural stability compared to previous B-type alloys, reducing concerns during welding, fabrication and service.

2.4819 has very good resistance to pitting, crevice corrosion and stress corrosion cracking, C276 is worth mentioning for its excellent resistance to aggressive media under oxidizing and reducing conditions.

Hastelloy C276 bushings have excellent resistance to strong oxidizing salt solutions such as ferric chloride and cupric chloride. Alloy C-276 has excellent phosphoric acid resistance at all temperatures below boiling point and concentrations below 65%.

Alloy C-276 prevents the formation of grain boundary precipitates in the weld heat affected zone, making it useful in most welding conditions for chemical processes.

Hastelloy B3 Socket Weld Flanges is dual-certified to meet both SS 316 and SS 316L.

Alloy C276 Coils are often used in Pollution control, chemical processing, Waste treatment, Marine engineering, Pulp and paper production, and more.

Hastelloy C22 has good versatility and resistance to chloride-induced pitting HASTELLOY? C-22? alloy (UNS N06022) is a well-known nickel-chromium-molybdenum material, some of its main properties are resistance to oxidizing and non-oxidizing chemicals, protection from Subject to pitting, crevice corrosion and stress corrosion cracking. C22 has a high chromium content and is more resistant to oxidation than C-276 alloy.

Nickel alloys are alloys with nickel as principal element. Complete solid solubility exists between nickel and copper. Wide solubility ranges between iron, chromium, and nickel make possible many alloy combinations.Steel plates are often used for structural and construcation applications, pressure vessels, marine and off shore equipment, and military applications. The grade, elements and parameters of a steel plate are also improtant in how it is used.

The outstanding oxidation resistance of HASTELLOY X pipe bend is illustrated below. Tests were conducted by exposing samples to dry air at 2000 Deg. F. and to dry air pressurized to 300 psi at 1750 Deg. F.

This nickel-molybdenum alloy is typically used under extreme reducing conditions and has a much lower composition of carbon, silicon and iron than Hastelloy B (Alloy B). Screws made from this alloy are also known as UNS N10665 fasteners.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy X flanges are high-performance chromium-nickel iron molybdenum super alloy flanges that possess superior corrosion resistance consistency and durability.

Hastelloy X alloy is a nickel-chromium-iron-molybdenum alloy with excellent oxidation resistance and high temperature strength, while still being easy to manufacture. It has also been found to be extremely resistant to stress corrosion cracking in petrochemical applications. This alloy exhibits good ductility after prolonged exposure to temperatures of 1200¡ã, 1400¡ã and 1600¡ã (650¡ã, 760¡ã, 870¡ã Celsius) for up to 16,000 hours.

Hastelloy X pipe bend is widely used for a variety of chemical processing parts, including retorts, pyrolysis tubing, and muffles due to its exceptional resistance to stress-corrosion cracking.

HASTELLOY C276 is one of the few alloys resistant to wet chloride gas, hypochlorite and chlorine dioxide solutions.

Nickel alloys are excellent for heat exchangers in the chemical processing and nuclear industrie.Hastelloy Piping Systems are widely accepted by plant operations management and maintenance specialists who appreciate their toughness and ability to withstand very aggressive fluids.

The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

The Molybdenum of Hastelloy B2 pipe bend is the primary alloying element which provides significant corrosion resistance to reducing environments.