high pressure alloy pipe

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

The ASTM A320 specification, originally approved in 1948, covers alloy steel and stainless steel bolting materials for low temperature service.

The grade mark consists of the grade symbol “2H” and the manufacturer’s identification mark.

We are also a supplier and exporter of Alloy Steel ASTM A182 F5 Butt Weld Flanges for high pressure hydraulic systems.

When the carbon content of the a333 gr 6 welded pipe chemistry is lower, the chance of cracking in the welded area is also lower. However, some manufacturers prefer seamless pipes over welded pipes. The reason behind this is that the performance of the a333 gr 6 seamless tube is almost 20% higher than the welded one in high pressure environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.57

A182 grade is an excellent alloy that is hardened only by cold work. Commonly used in nuclear energy, medical equipment, chemical energy, etc.

The ANSI B16.5 Alloy Steel Slip On Flange is a flange type that allows the pipes to slip onto the flange and makes the connection in a precise locations.

Flanges are usually welded or threaded. Flange joints are made by bolting two flanges together with a gasket between them to provide a seal.

ASTM A193 Grade B7 bolts are made of chrome-molybdenum material with high tensile strength and good elongation properties.

This is used in fabrication of tubes, boilers and super heaters. On many other applications, this is used and is available in various other sizes and shapes.

ASTM A182 Alloy Steel Forged Fittings are manufactured according to the ASTM A182 specification, which covers high pressure and high temperature service flanges covered by ASME B16.11, MSS-SP-79/ 83/ 95/ 97 and BS3799 standards.

Flange connection has good strength and sealing, simple structure and low cost. It can be repeatedly disassembled.

ASTM A182 F11 class 1 Flange is the method of connecting two pipes, pumps and valves. This consists of chromium molybdenum based alloy steel grade.

a182 gr f9 alloy steel flanges generally conform to ASTM grade A182. ASTM Class A182 is a specification for rolled or forged alloy flanges for high pressure applications and systems.

A low alloy steel flanges series mostly consists of approximately 0.5% to 9% of Chromium. And the content of Molybdenum in the alloy steel flanges ranges anywhere between 0.5% to 1% .

ASTM A320 Class L7 fasteners are manufactured using high strength materials ideal for the manufacture of fastener product bolts, studs and bolts that can be used in a wide range of high temperatures in bolting applications.

El grado B7 es un acero de baja aleacion de cromo molibdeno tratado termicamente con un requisito minimo de resistencia a la traccion de 125 ksi (860 Mpa), un limite elastico de 105 ksi (720 Mpa) y una dureza maxima de 35HRC. Boltport produce pernos con cabeza y sin cabeza B7 a partir de barras de acero aleado AISI 4140 o piezas forjadas.

The A335 P91 chrome tube composition makes these high mechanical properties possible for the material. P91 steel pipe materials can be normalized and tempered during the production process, and can also be quenched and tempered. These methods increase the strength of the material. Additionally, these pipes are drawn and seamless.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

ASTM A182 F5 Lap Joint Flanges go by a range of names, including back up flange, loose hubbed flange, loose ring flange and van stone flange. ASTM A182 F5 Flanges is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

The alloy content of pipes that make up low alloy steel is less than 5%. High alloy steels, on the other hand, have an alloy content ranging from 5% to about 50%. Similar to most alloys, the working pressure capacity of alloy steel seamless pipe is about 20% higher than that of welded pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P127

ASTM A182 F5 flanges are forged flanges made of chrome molybdenum low alloy steel called 5Cr-0.5Mo, UNS designation K41545. Widely used in oil refineries, chemical and petrochemical, power plant pipelines, heat exchangers, various pressure vessels and other pressure and high temperature services.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Grade B7 is a heat-treated chromium-molybdenum alloy steel with minimum tensile requirement of 100 ksi, yield of 75 ksi and maximum hardness of 35 HRC.

Hastelloy C276 ASTM Standard B575 Plate is a nickel-molybdenum-chromium superalloy with an enhancement of tungsten made to have superb deterioration resistance in a wide variety of extreme atmospheres.

Other than carbon, these contain in them substantial quantities of nickel, manganese, chromium, silicon, tungsten, vanadium, molybdenum.

Our Alloy Steel Flanges are widely used in various industrial applications.

ASTM A194 2h nuts are available in nominal sizes ranging from ?” to 4″. These products are made with heavy duty hex nuts with different proof load stresses for regular nuts and zinc plated nuts. A194 2h coupling nut with 175ksi plain nut and 150ksi zinc plated nut. Fasteners of this grade of material also have high hardness.

We are a manufacturer, supplier and exporter of Alloy Steel ASTM A182 F5 Flanges, which have gained overall positioning in several piping systems. Our range of alloy steel A182 F5 slip flanges includes all types of conventional and custom flanges to ASTM A182 specification, alloy steel flanges for high temperature service.

Users of SA182 Chrome Moly Gr.f9 forged bar do not rely solely on external coatings or finishes.

The flanges also come in B16.5, B16.47 and other standards and dimensions. The Alloy Steel Flange Material can vary according to the chemical composition.