High Quality DIN931 933 Bolts W. Nr. 2.4819 UNS N10276 Alloy C276 Hastelloy C276 hex bolt

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C276 Plates, which has excellent corrosion resistance in reducing environments. Inconel C276 Plates is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

The 2.4819 Alloy C276 Flat Plate is typically used in areas with extreme conditions.

Alloy X pipe bend is one of the most widely used nickel base superalloys for gas turbine engine components.

Hastelloy B-2 is a nickel-base wrought alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

These Hastelloy B2 Slip On Flanges can be machined using all the traditional machining methods. More than most other metals of similar chemistry, our Hastelloy B2 Spectacle Blind Flanges offers superior protection against powerful chemical corrosion and comes with one of the best high ¨C temp strengths of any steel.

UNS N10276 Sheets has excellent resistance to pitting corrosion, pressure corrosion cracking and a far higher resistance to crevice corrosion than steels of alloy.

ASTM B619 UNS N10276 C276 pipes are also available in other shapes such as square, rectangular and hexagonal pipes. 2.4819 Hastelloy C-276 Alloy C276 pipe is used in applications where bending should not reduce strength. These ASTM B619 N10276 seamless pipes are mainly used to transport fuels from one place to another, as well as chemicals in different parts of processing plants.

Each method has unique benefits and will determine the degree of bending possible and the final shape of the pipe.

Hastelloy G30 is resistant to grain precipitation in high temperature regions. Hastelloy G30 fasteners exhibit physical properties such as thermal conductivity, elongation, and elastic modulus. Hastelloy G30 has properties such as yield strength and tensile strength. Our company supplies these fasteners to oil and gas, refineries, fertilizers, heat exchangers. These fasteners are also used in water treatment, sugar, dairy and food processing. It also shows density, area reduction, and coefficient of linear thermal expansion. Our Hastelloy G30 fasteners are highly resistant to hydrochloric and nitric acids. The alloy has superior resistance to industrial phosphoric acid. Hastelloy G30 fasteners perform well in corrosive environments.

The Ni-Cr-Mo superalloy Hastelloy C276 has excellent resistance in strong acid and alkali media and prevents pitting, crevice corrosion and SCC. Hastelloy C276 also has broad resistance to wet chloride gas, hypochlorite and chlorine dioxide media.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These salts may develop when hydrochloric acid comes in contact with iron and copper. Therefore, if this alloy is used in conjunction with iron or copper piping in a system containing hydrochloric acid, the presence of these salts could cause the alloy to fail prematurely.

Hastelloy C276 Sheets & Plates are satisfactorily cold formed and have high yield strength for welding. Components made from Hastelloy C276 Sheets & Plates are ideal for high compact fittings, heavy duty, thermal processing applications, food processing and more.

Hastelloy C-263, is an age hardenable nickel-cobalt-chromium-molybdenum alloy.Hastelloy? 2 C-263 has some very positive attributes that make it ideal for a wide range of applications. HAYNES? 263 alloy combines properties which make it suitable for a variety of fabricated component applications in both aircraft turbine engine and industrial turbine applications.

Inconel 600 flat washers are also non-magnetic and offer the perfect combination of high strength, hot and cold workability, and resistance to common forms of corrosion. Inconel Alloy 600 ferrules exhibit excellent toughness even at sub-zero temperatures and are suitable for use with most alkaline solutions and sulfides. To avoid stress corrosion cracking, Alloy 600 split washers are manufactured to be fully stress relieved prior to use.

Hastelloy C-276 is a very popular alloy for us because of its high corrosion resistance in a wide range of environments. It has excellent resistance to oxidizing aqueous media, including wet chlorine and mixtures of oxidizing acids containing nitric or chloride ions.

C-22 is used in severely corrosive media with high chloride and temperature applications such as buffer solutions, active pharmaceutical ingredients (API), fabric softeners, cleaning supplies, and fish, soy and chili sauce.

It is well known that Hastelloy c22/C276 fasteners have good dimensional accuracy, corrosion resistance, durability, high durability, high flexibility, strong structure, high tensile strength and other characteristics. In addition, fasteners are resistant to wear in high temperature atmospheres and corrosive environments. Some of the environments in which these fasteners exhibit resistance are oxidizing media, reducing media, chloride environments, and sulfur environments. They are resistant to attack by chemicals such as nitric acid, chlorine, sulfur, acetic acid, organic, inorganic, phosphorus, etc.

Hastelloy C-276 has superior resistance to localized corrosion as well as oxidizing.C276 alloy is suitable for many chemical process applications.

Hastelloy Alloy B2 Pipes is known for its excellent chemical resistance, suited to high pressure and high temperature applications.

Two criteria for evaluating oxidation resistance are weight change and depth of corrosion penetration. HASTELLOY X pipe bend excels in both respects due to the formation of a protective, tenacious oxide film.

Chemical processing plants use high-end, high-precision tubing, such as Ni C276 hot-worked tubing. There are also resistance welded pipes. Hastelloy C276 Alloy EFW Tubing is easy to use. It can be welded without much precipitation. This feature helps the material retain its shape and not corrode even after applying field welding.

Hastelloy B3 Ring Type Joint Flanges is ideally suited for applications requiring corrosion resistance superior to SS 304 and has good elevated temperature strength.

Hastelloy C276 flanges are made of a nickel-chromium-molybdenum alloy called Hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus. Hastelloy C276 flanges have a high melting point of 1370 degrees Celsius.

C-276 alloy has excellent resistance to pitting and to stress-corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy B3 bolts are also known as alloy B-3 bolts and can be found under UNS N10675. This alloy is extremely resistant to pure hydrobromic, sulfuric and hydrochloric acids. Many industries, including the chemical industry, consider the alloy easy to machine, and its ductility allows machinists to easily form and even weld.