High tensile strength ASTM A182 F5 F11 F12 F91 WN flanges Blind flanges SO flanges

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Adding nickel adds toughness to the alloy. Similarly adding chromium to chrome moly flanges aids in enhancing other mechanical properties such as temperature strength, hardness, as well as corrosion resistance.

The high chromium content gives these forgings fittings very good resistance to moisture erosion, which also contributes to their high temperature strength and resistance to scaling at high temperatures.

ASTM A193 Grade B7 specification covers requirements for high tensile alloy steel bolting material for use in high temperature or high-pressure service and other special purpose applications.

These are available in different types such as Slip On Flanges., Blind Flanges, Weld Neck Flanges, Socket Weld Flanges, Orifice Flanges, Spectacle Blind Flanges, Screwed / Threaded Flanges, Reducing Flanges, and Ring Type Joint Flanges (RTJ).

The A182 F9 Alloy Steel Blind Flanges are used to close a connection opposed to all other flanges which extend the pipeline. Alloy Steel ASTM A182 F9 Flanges is connected to the pipe by welding the pipe to the neck of the pipe flange. However, the inside diameter of ASTM A182 F9 Alloy Steel Flanges is being designed to match the inner diameter of the pipe.

The size of these forgings range from ? NB to 250 NB and length of these forgings is 2mm to 40mm.

Alloy steel seamless pipes are widely used in medium and low pressure fluid pipelines, casings, boiler tubes, oil and gas industry, chemical industry, power generation industry, transformers, agriculture, bearings, general engineering, automobiles, hydraulics, railways, mining, construction, aviation Aerospace, medical, defense and electric motors. P91 alloy steel is mainly used in the power industry. For welded structures, the ASME Boiler and Pressure Vessel Code limits the carbon content to less than 0.35%. Alloy steels are ideal for applications that require higher strength, tougher or better wear resistance than standard carbon steel grades.

The connection between two pipes can be directly welded together, but it is difficult to connect together without welding. When the connection part have problems, it will be hard to repair. The same problem also happened between pipe and valve connection.

ASTM A194 bolts include metals such as manganese and silicon, with additions of phosphorus, sulfur, and carbon. ASTM A194 gr 2h bolts are suitable for high pressure or high temperature service, or both. Further machining is possible by centerless grinding or cold drawing.

Alloy steel seamless pipes are used in applications that require high precision for ease of installation and accuracy of operation and application. Different types are used for different mechanical benefits. Most applications require a lot of welding, so welding alloy steel pipes is good for them. Some are low in strength but high in corrosion resistance, and some are also high in strength. We offer high strength low alloy steel pipes in various grades and sizes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.63

Standard ASTM A193 B7 fasteners typically have a common bare metal finish. However, ASTM A193 Grade B7 studs can be galvanized, hot-dip galvanized, xylan coated, teflon coated if requested by the buyer. Coating ASTM A193 B7 fasteners can help improve the corrosion resistance of fasteners. This ASTM A193 Grade B7m bolt is typically used to fasten medium high temperature service materials. These bolts are liquid quenched from 50¡ãF to 900¡ãF and they can be air quenched from -40¡ãF to 900¡ãF.

We offer alloy steel grade 2H washers in various specifications and ranges according to the precise needs and selection of our customers. Alloy Steel Grade 2H Star Washers can be produced in standard sizes or custom made to your specific requirements. Customers can take advantage of what we offer alloy steel grade 2H spring washers at market leading prices.

Alloy Steel F12 slip on Flanges are made up of chromium molybdenum steel alloy and therefore have a high rupture resistance. They are also preferred due to their light weight because of the low carbon and high alloy nature.Alloy Steel ASTM A182 flanges are very simple to install and have a low center because the pipe occasionally trips into the flanges after welding.

We are a manufacturer, supplier and exporter of Plate Flanges, which are accepted by major industries as a cost-efficient alternative to other types of flanges whose cost increases due to its expensive production pattern.

While the term alloy steel could even apply to stainless steel grades, the ASTM specification or ANSI standard used to produce the Alloy Steel Flanges would give the buyer details regarding the chemistry details of these products.

Alloy steel grade 2H gaskets are further cut, hydrotested, annealed, straightened and pickled. The manufacturing process of our Alloy Steel Grade 2H Split Gaskets is carried out in a state-of-the-art production facility under the proper supervision of industry experts.

825 is an austenitic Ni – Fe – Cr – Mo – Cu nickel based alloy developed to resist corrosion in very aggressive media.Alloy 825, also known as Incoloy 825, is a nickel-iron-chromium alloy with molybdenum and copper added.

The addition of molybdenum increases the softening resistance of sa335 grade p5. It also prevents grain growth. In addition, molybdenum increases the resistance to brittleness that can occur in chromium steels. This chrome molybdenum alloy a335 p5 steel pipe is ideal for applications that carry fluids such as oil, water and gas at very high pressures and temperatures. astm a335 p5 alloy steel pipe is ideal for forming operations such as bending and flanging, and fusion welding.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.65

ASTM A182 Gr F9 flanges are typically designed for applications with high temperature requirements. Alloys used to produce flanges according to this specification include wrought or rolled alloys and several stainless steel grades.

Alloy steel f9 flanges are thinner in size compared to other flanges. Therefore, astm a182 f9 blind flanges tend to be ideal for tight work spaces.

Astm a182 f12 product has good yield strength and tensile strength. In addition, it has high hardness and 20% elongation.

Monel 400? has low corrosion rate in flowing seawater, therefore it is widely used in marine applications.We make use of the best manufacturing techniques for their production so that the final product being served to the customers is the best of best.

Chromium-molybdenum alloy steel has strong crack resistance under high temperature and high pressure. Chromium molybdenum is also resistant to hydrogen attack and hot sulfide corrosion cracking.

Alloy Steel Grade 2H Flat Washers are available in a variety of sizes according to market and customer needs. We play a major role in providing our customers with a high quality range of alloy steel grade 2H lock washers with some great features such as precise dimensions, custom solutions, robustness and more.

ASTM 182 is used for pressure systems, including flanges, fittings, and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

The flanges can be threaded, ring type joint, lap joint, weld neck or socket welded.

ASTM A335 grade P91 tubing contains small amounts of other alloys such as aluminum, niobium, nickel, nitrogen, titanium, vanadium, and zirconium. These pipes are based on the A335 standard, but when forged or drilled, the pipes can also meet the A369 standard. These pipes have a minimum yield strength of 415 MPA and a minimum tensile strength of 585 MPA.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Seamless pipes are used with slip on flanges to make the process smooth. The Alloy Steel Blind Flanges are used to close a pipe connection.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.