hot rolled steel round bars

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

The Nickel Alloy 601 Cold Finished Bar is formed after the hot-rolling process comes to an end.

This alloy is widely used in chemical and food processing, power generation, furnace components and many other market segments.

DIN 1.4876 Rounds can work over a range of temperatures and pressures and exhibit excellent mechanical properties. These components have a minimum tensile strength of 600mpa and a minimum yield strength of 275mpa. ASTM B408 Incoloy 800 Precision Ground Rods are designed to have a uniform cross section. The strips are dimensionally and geometrically accurate.

The corrosion resistance of Nickel 200 rod makes it particularly suitable for maintaining product purity in handling food, caustic and synthetic fibers, and in structural applications where corrosion resistance is a primary consideration. Other applications include electrical and electronic parts, chemical transport drums, missiles and aerospace parts. Nickel 201 round bar is a commercially pure wrought alloy with similar properties to Nickel 200 round bar, but with a lower carbon content to avoid embrittlement due to intergranular carbon at elevated temperatures.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 718 is a nickel-chromium precipitation hardening alloy that maintains good ductility and high strength at temperatures up to 1300°F.

Inconel X750 is a superalloy that has excellent properties enabling it to exhibit high strength at high temperatures, excellent corrosion resistance, and good oxidation resistance up to 1300¨H.

Our Inconel 718 Forged Round Rod and Inconel 718 Bright Rod exhibit high burst and tensile properties even at high temperatures.

Inconel 625 round bars can be manufactured in hot-worked bar form per ASTM B446 specification. These properties specified by ASTM B446 for 2.4856 Inconel 625 hexagonal bar include the tensile strength, yield strength and elongation properties of the material.

Incoloy 800 round bar with all necessary properties and properties such as correct rupture, creep strength, excellent oxidation resistance and high temperature vulcanization. Our high-grade round bar has unique electrical resistance properties that protect it from a wide range of environmental conditions, making it suitable for higher stress conditions and high temperature applications.

Alloy 625, commonly known as Inconel 625, is a nickel-chromium-molybdenum-niobium alloy (NiCr22Mo9Nb).

Alloy 625 is especially useful where oxidation resistance and pitting avoidance are required. In the annealed condition, this Inconel is fully austenitic and suitable for machining. Due to its high alloy content, it provides excellent corrosion resistance in a variety of severely corrosive environments. With a nickel content of nearly 60%, it is virtually immune to stress corrosion cracking.

Inconel 601 is an alloy composed of nickel and chromium.

Inconel 800 round bar is an iron, nickel and chromium based alloy. This Inconel 800H hot-worked round bar is known for its moderate tensile strength, good oxidation and carburization resistance, and performance at elevated temperatures.

A round bar is a long cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. Products are usually measured by measuring their diameter. Standard diameters range from 1/4″ all the way up to 24″. Other sizes may be available.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Like other nickel alloys, HASTELLOY C-22 alloy is fairly ductile, has excellent weldability, and is easily fabricated into industrial parts. It is available in sheet, sheet, strip, billet, bar, wire, tube and tube. Typical applications may include: reactors, heat exchangers and columns.

Alloy 925 is a nickel-based alloy with major additions of iron and chromium, but also molybdenum, copper, titanium, and aluminum. The combination of high strength and corrosion resistance makes it suitable for applications such as valves, hangers, packers and pipes in sour gas environments. It can also be used for fasteners and pump shafts in marine environments.

The combination of nickel and chromium provides protection in both oxidizing and reducing atmospheres. The high nickel content also provides resistance to chloride ion stress corrosion cracking. Resistance to pitting and crevice corrosion is also excellent. The alloy is produced by a vacuum remelting process, but can be supplied using an air melting single-consumer electrode (VAR or ESR) practice if material specifications permit.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

ASTM B408 Incoloy 825 bar will remain stable with prolonged exposure to elevated temperatures. It will also avoid corrosion in many aqueous environments, where molybdenum also helps resist pitting and crevice corrosion.

Alloy 600 is an excellent choice for a variety of applications. It is a highly corrosion and heat resistant material, and its high thermal conductivity means it has a low coefficient of thermal expansion.

Alloy steel round steel is famous for its good toughness, good torsional strength and good fatigue strength. The alloy has good machinability in the annealed state. In the heat treated and quenched condition, machining is preferably limited to fine grinding.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 600 threaded rod is Inconel, a common engineering material used in applications requiring corrosion and temperature resistance. The chromium content of Alloy 600 threaded rod makes it greater than commercial pure nickel in rusted conditions. The tensile strength of this bar is Psi 95,000, MPa 655, while the melting point is also discussed Melting point: 1413 C.

Unlike austenitic stainless steels, Inconel 625 round bars offer the advantage that they are less susceptible to chloride-induced stress-related corrosion cracking.

Hastelloy C-276 has superior resistance to localized corrosion as well as oxidizing.C276 alloy is suitable for many chemical process applications.

Incoloy 800 / 800h / 800ht round bars are nickel-iron-chromium alloys with high tensile strength and excellent corrosion resistance. These are also in a carburized state at high temperatures. Incoloy 800 is a pure grade material, slightly modified to 800 h grade. These round bars are suitable for elevator temperatures in construction applications.

Hastelloy C-276 is easy to form, ductile, it is easy to weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions.

Monel 400 is resistant to a variety of corrosive conditions. For example, acidic applications involving hydrofluoric acid, brine, sulfuric acid and bases. Alloy 400 can only be hardened by cold work. Monel 400 is used in many industries for its excellent corrosion resistance, especially marine and chemical processing.

Nickel Alloy Inconel 625 | UNS# N06250 is a nickel-based superalloy with high strength properties, high temperature resistance, and significant oxidation and corrosion protection.

Available in a variety of sizes and dimensions, Uns N08800 steel is a common fixture in brackets, ladder hangers, heaters, overhead doors and more.

ASTM B446 UNS N06625 bright bar has excellent strength and toughness in the temperature range from low temperature to high temperature such as 2000¡ãF. In addition to high tensile strength, this Inconel 625 ingot has a high degree of formability and better weldability than many other high alloyed nickel-based materials.

Inconel X750 is an alloy that has a high resistance to corrosion and oxidation. Inconel X750 also resistant to creep deformation, which makes it suitable for use in high-temperature environments where other alloys would deform over time.