hs code carbon steel pipe fittings carbon steel tee

The strength of Inconel 625 lies not only in its nickel-chromium base but also the hardening mechanism of niobium and molybdenum.

Alloy 800H is a solution heat treated (2100¡ãF/1150¡ãC), controlled-carbon version of alloy 800 with improved elevated temperature properties. It has improved creep and stress-rupture characteristics in the 1100¡ãF (593¡ãC) to 1800¡ãF (982¡ãC) temperature range.

The high-temperature plasticity of the experimental alloy added with trace amounts of Mg, Cr and Co is obviously improved, and it exhibits certain superplasticity. At 1010¡æ, the strain rate sensitivity index m is 0.32, and the maximum elongation is 240%.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

There are 5 most common ASTM A234 WPB Elbow are in mainly in demand, the 45¡ã, 90¡ã and 180¡ã elbows, all three in the “long radius” version, and in addition the 90¡ã and 180¡ã elbows both in the “short radius” version.

We are having a team of dynamic and experienced professionals who are observing and supervising the whole process to avoid defects. SS 316/ SS 316L Compression Tube Fittings are suitable to use in chemical, food, beer, decorate, and fluid applications industries. Due to the additional Molybdenum, SS 316 Compression Fittings has better corrosion resistant properties and higher strength than grade 304. We supply best-in-class products, meeting and exceeding our client¡¯s expectations.

Stainless Steel 347 Fitting is an austenitic stainless steel with a nominal composition of 17% Chromium and 7% Nickel with good strength and ductility when cold worked.

Strong and Oxidation Resistant to 2200 Deg. F (1200 Deg. C) – HASTELLOY X pipe bend is a solid solution strengthened grade has good strength and oxidation resistance up to 2200 Deg. F (1200 Deg. C).

Stainless steel 310 elbow butt welded pipe fittings are also used in most large modern structures such as stadiums and skyscrapers, bridges and airports. Even those with concrete structures are reinforced with stainless steel 310S tee butt welded pipe fittings, and it is also widely used in major appliances and automobiles.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

HASTELLOY C-276 alloy (UNS N10276) was the first wrought, nickel-chromiummolybdenum material to alleviate concerns over welding (by virtue of extremely low carbon
and silicon contents).

Monel k500 has good corrosion resistance and long-term organizational stability.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Incoloy 800H Forgings are components manufactured from chromium nickel alloy with additions of aluminium, titanium and high carbon content.

ASTM B 366 Hastelloy C276 Welded Outlets are used for butt welded branch connections where the pipeline is in critical/high pressure service. It is designed to minimize stress concentrations and provide overall reinforcement.

The stainless steel pipe fittings are available in different cast stainless steel grades including 304, 316, and 316L stainless steel. Different casting grades of stainless steel are suitable for different environments.

The ASTM A234 WP5 specification consists of wrought carbon steel and alloy steel in seamless and welded form. The ASTM A234 WP5 Pipe Fittings are widely used in pressure vessel fabrication. These fittings have application under moderate to high temperatures and can also be effectively used in pressure piping systems.

Stainless Steel 304 Buttweld Fittings are made up of a basic austenitic stainless steel material that has 18% chromium and 8% nickel in its composition.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel pipe fitting is part that connect pipe to pipe, its purpose to connect, control and change the direction, split, sealed, support various parts and components in pipeline system, selecting and preparing proper pipe fitting to joint together, there are various types, sizes, grades & specifications to meet specific requirement.

ASME SA 240 UNS S32205 elbows are standard elbows that can be connected to almost any size elbow. These elbows are available in NPS ? to NPS 48 and can change the direction of flow in the pipe. UNS S32205 elbows are stronger than austenitic stainless steels.

3A sanitary stainless steel 90 degree welded short elbow has strong corrosion resistance and long service life. The fitting is easy to install and features problem-free welding and assembly with the highest possible strength.

Incoloy 800 is an alloy of Nickel, Iron, and Chromium alloy with high strength and excellent resistance to oxidation and carburization in high-temperature exposure. Incoloy 800H and 800 HT are also Nickel, Iron, and Chromium alloy which is used for high-temperature structural application. Incoloy 800HT has further modifications to the combined titanium and aluminium levels which ensures excellent high-temperature properties.

We assemble SS 316 / 316L pipe connectors with premium quality that can withstand high pressure and temperature. For the fabrication of these pipe fittings, we select the premium quality raw material. These fittings are of excellent quality, such as perfect finish, durability, excellent pitting resistance, low maintenance, and robust construction.

Inconel 625 elbow was designed to have better weldability than earlier alloys, with no signs of cracking when exposed to strain and temperature changes post-welding.

These stainless steel pipe fittings have excellent corrosion resistance and dimensional accuracy along with close tolerances. Our range of pipe fittings include butt weld pipe fitting & instrumentation and ferrule fitting are offered in different sizes, we also provide customization as per the requirements of clients.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

ASTM A234 WPB Fittings are made up of different material grades.ASTM A234 WPB WPC WP5 WP9 WP11 WP22 Fittings Specification
ASTM A234 (ASME SA234) is standard specification of carbon and alloy steel pipe fittings for moderate and high temperature services.