HT 45 DEGREE ELBOW 20 X90 12.70MM CARBON STEEL SEAMLESS A234 WP9 1186579

Flanges are an integral part of processing based industries. Most industries, including the oil and gas, water treatment and nuclear power generation make use of pipes, which permit the flow of media across different factory units

ASTM A333 Grade 6 Pipe is a carbon steel pipe that meets ASTM, ASME and API standards. Pipe series is available in grades 1 to 11 and sizes range from 1/2″ to 48″.

Generally speaking, the carbon-free content of carbon steel pipe flanges is lower than that of molten flanges. They don’t oxidize very quickly. They are flat and fairly light in construction, and the fused flanges have excellent mechanical properties. Improper forging methods often result in broad or irregular grains; hardening cracks and forging are taller than cast flanges.

They also exhibit low strength. However, mild steel is highly flexible. High ductility is a property that makes the material ideal for machining and welding.

A105 Flanges are disc-shaped parts, which are the most common in pipeline engineering. Flanges are used in pairs and matched with them on valves. In pipeline engineering, flanges are mainly used for pipeline connections. In the pipelines that need to be connected, flanges can be installed in a variety of ways. Wire connection flanges can be used for low-pressure pipelines, and welding flanges can be used for pressures above 4 kg. Add a washer between the two flanges, then tighten with the bolts.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Carbon steel bolts are one of carbon steel fasteners. There are different types of carbon steel and they all have high hardness. HT PIPE is a leading manufacturer and supplier of carbon steel nuts and bolts and other fasteners.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Welding neck flange have two forms (shapes), one with reducing neck as we called reducing weld neck flange; One with a even diameter of typical long neck named as long neck weld flange.

As a leading manufacturer, we produce fasteners in most varieties and grades. Please feel free to contact us for more information on different types such as carbon steel threaded rods and other prices.

ASTM A234 standard steel pipe fittings have been widely applied in pipeline systems, it includes carbon and alloy steel material.

A105 carbon steel round bars contain carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium.

Sorf and Blind flanges are common types of flanges in the A105 grade. These flange types can be distinguished based on certain aspects.

These fittings commonly used in pressure pipelines and pressure vessel/tanks at lower temperature.

Weld neck flange(WN flange) attach to the pipe by welding the pipe to the neck of the pipe flange. The allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck flanges.

U-bolt diameter: ¦Õ7mm, plate size: 3.890 x 1.142 x 0.110mm.
Material: Q235B carbon steel, electro-galvanized surface to improve the rust and corrosion resistance of U-bolts.
Nut: Anti-slip washer design.
Application: For fixing or connecting blocking pieces to pipes, wood, etc. Suitable for boats, plumbing and other domestic and industrial applications.
Package Contents: 10 U-Bolts, 20 Nuts, 20 Round Washers, 10 Plates.

ASTM A105 Socket weld Fitting is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld Fittings are mainly used for small Pipe Diameters (Small Bore Piping); Generally for Piping whose Nominal Diameter is NPS 2 or smaller.

These A234 WPB B16.9 Elbows are used in pipe system construction. We are manufacturing ASTM A234 WPB Elbow from pipes using “mandrel” method which allows the pipe to expand and bend simultaneously.

HT PIPE provides high quality ASTM A350 LF3 Grade 1 and 2 Plate Flanges, we manufacture SA350 LF3 Pipe Flanges, LF3 Carbon Steel Flanges and ASTM A350 Gr LF3 Cl1 Blind Flanges at low prices in China.

We produce Carbon Steel A105 / A105N Blind Flanges which are successful in pressure bearing and sealing pipe ends in heavy pressure applications like hydraulic systems since they have a maximum bending stress at the centre.

Pipe fittings of ASTM A420 WPL6 are widely utilized in pressure piping and pressure vessel service at low-temperatures.ASTM A420 is the standard specification for pipe fittings of carbon steel and alloy steel used for low temperature services.

Flanges are an integral part of processing based industries. Most industries, including the oil and gas, water treatment and nuclear power generation make use of pipes, which permit the flow of media across different factory units

The use of Carbon Steel ASTM A105 Blind Flanges makes it easier. Blind flanges are used to shut off a valve or they could be used to block off the flow of media across pipes.

ASTM A515 Grade 70 carbon steel is used in chemical boiler plants and in the petrochemical industry. It is resistant even to high temperatures in the field of application.

ASTM A105 covers forged carbon steel flanges and piping components for ambient and high temperature service in pressure systems. It also includes fittings, valves and similar parts. The maximum weight of manufactured forgings to which this standard follows is 10,000 circles (4,540kg). Larger forgings can be made in accordance with Standard A 266/A266M. This specification does not cover tube sheets and hollow cylindrical forgings for pressure vessel shells.

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

When connecting these parts, put gasket in the middle of two flanges, then tightening the flange screws, so the two will be connected together tightly.

Welded A234 WPB pipe fittings mean the large sizes fittings which are pieces welded from steel plates.

In the manufacturing industry, the production is done by obviously using the best possible quality of crude materials and alloys. It thus tends to offer various good attributes.

Nuts are attached to corresponding bolts or rods to secure items. Cap nuts protect the threads of fasteners by preventing them from protruding. The locknut and locknut are locked on the bolt to prevent loosening. Thumb nut and wing nut are manually adjustable. The connecting nut is an extension for connecting two threaded rods.