HT 45 DEGREE ELBOW LR 30 X SCH30 ASTM A234 WPB HEAT 2563881 CARBON STEEL

This specification covers standards for forged carbon steel piping components, that is, flanges, fittings, valves, and similar parts, for use in pressure systems at ambient and higher-temperature service conditions.

It includes solid design, wear resistance, very good durability, solid construction, corrosion resistance, excellent strength, best quality.

Generally speaking, the carbon-free content of carbon steel pipe flanges is lower than that of molten flanges. They don’t oxidize very quickly. They are flat and fairly light in construction, and the fused flanges have excellent mechanical properties. Improper forging methods often result in broad or irregular grains; hardening cracks and forging are taller than cast flanges.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In our Mumbai Facotry, we produce long radius (LR, LRE) A234 Pipe Elbow the radius of curvature is 1.5 times the diameter (R=1.5D).

These pipe fittings include Tee, Concentric reducer, eccentric Reducer, 5D/6D bend, elbow, unions, plugs, cross tee, pipe cap and nipple, ect for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The ASTM A420 Grade WPL6 can be seamless, welded or fabricated. There are different types of the fittings such as the unions, plugs, couplings, bends, caps and elbows.

ASME B16.5 Weld Neck flange dimensions are applicable to all flange materials.

A515 grade 70 carbon steel has the advantage of high strength due to its machinability and formability characteristics. Due to their high chromium content, these carbon steels have excellent corrosion resistance in many media.

Mild steel, it is a type of carbon steel. Carbon is present in all steels and when carbon is the main alloying element in steel it is called carbon steel. On the other hand, the amount of carbon present in the steel determines the type or grade of carbon steel. Mild steel has the lowest carbon content of any steel, but that doesn’t make it less useful. In fact, mild steel is the most commonly used steel grade, accounting for 85% of total U.S. steel production.

ASTM A105 Socket weld Fitting is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld Fittings are mainly used for small Pipe Diameters (Small Bore Piping); Generally for Piping whose Nominal Diameter is NPS 2 or smaller.

These flanges are best suited to the high demands imposed by the oil, gas and petrochemical industries

ASTM A350 LF2 Carbon Steel Bar is a heat resistant steel with high resistance to oxidation scaling and high strength at elevated temperatures.

Regardless of the heat treatment applied to the carbon steel alloy, the higher carbon content in the material reduces the weldability of carbon steel fasteners, while also effectively reducing the melting point of the bolt. Most carbon steel studs are generally softer.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

There are different pressure classes such as class 150, 300 and up to 2500 and PN6 through PN64. The A105 Class 300 Flange and below don¡¯t need heat treatment while the higher pressure classes can undergo heat treatment.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

The standards set for ASTM A694 is more rigorous than the two above. Its requirements for high-pressure fluid transmission of oil and gas piping is stringent. Because of the stringent conditions with the steel grade, manufacturers have to develop an even stronger steel for both low temperatures and high temperatures.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

There are the pressure grade ASTM A234 WPB Pipe Fittings in ? inches to 24 inches nominal bore sizes with different wall thicknesses that correspond to the schedules.It does not cover cast welding fittings which refered standards are ASTM A216/A216M and A217/217M.

ASTM A694 carbon steel is the most common grade of carbon steel used for round bar development. The increased carbon content of the alloy reduces ductility by increasing tensile strength. However, the carbon content provides the round bar with the ability to harden during tempering. This is why round steel developed with the existence of alloy carbon steel grades.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Flange connection has good strength and sealing, simple structure and low cost. It can be repeatedly disassembled.

The increase of carbon element content makes the steel sturdier and stiffer after the heat treatment, and it also becomes less ductile. Without the heat treatment, higher carbon will reduce weldability.

ASTM A350 LF3 Carbon Steel Round Bars are designed and developed to international quality standards. We have ready stock to ship to most parts of the country. These ASTM A350 LF3 carbon steel round bars are made of high grade corrosion resistant metal alloys. Carbon steel LF3 round bars have the best corrosion resistance to general corrosion. Carbon steel LF3 threaded rods have good ductility and optimum creep properties. Carbon steel LF3 polishing rods have the best corrosion resistance to oxidation corrosion.

ASTM A105 flange is a standard carbon steel grade designed with a superior chemical composition.

A105 Forged Steel Fittings can be ordered to meet the customer requirements by getting them customised according to the instructed dimension . The ASTM A105 Fittings Dimensions are also available as per industry standards such as MSS, ASME and API specification. The A105 Forged Fittings specification are has a limit of up to 10,000 lbs.

It is essentially a normal carbon steel and is not resistant to corrosion. It will rust unless protected. It can be easily bent or cold formed like regular carbon steel.