HT 45 DEGREE ELL 20 X90 12.70MM CARBON STEE SEAMLESS A234 WP9 1186579

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Forged pipe fittings refer to pipe fittings formed by forging in pipe fittings manufacturing industry. What is said here refers to the latter forging.

These ASTM A350 Flanges LF3 are suitable for use down to 150oF (LF3). These LTCS A350 LF3 orifice plate flanges are basically used in high energy/high temperature channel systems.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

ASTM A234 WPB Elbow is a standard specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel suitable for for Moderate and High Temperature Service.

Forging fittings Carbon content 0.35% maximum and Silicon content 0.35% maximum, no minimum.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The regular products of A234 WPB pipe fittings are elbows,tees,reducers,caps,cross.There are seamless and ERW A234 WPB pipe fittings,the seamless A234 WPB pipe fittings means the fittings are made from the seamless steel pipes,ERW means the fittings are made from ERW steel pipes.

The typical hardness of mild steel is Rb70/85. Parts requiring high strength and wear resistance or for use in critical components can be fabricated from high carbon steel or case hardened after fabrication. Chromate coatings can provide corrosion protection. Carbon steel washers are used for fastening in various industries.

Knowing the finish of these steels can be helpful if your pipes are visible and appearance is on the list of considerations. Stainless steel is usually glossy and can retain that gloss if exposed to weather and other factors. Carbon steel, on the other hand, is darker in color and usually has a matte finish when painted. Unfortunately, it can also rust and look bad if left exposed. Galvanizing is also an option.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

ASTM A105 steel grade is a typical common material (mild carbon steel) for forged carbon steel flange, it used in a lot of places for ambient and higher-temperature service in pressure systems.

ASTM A105 is a standard material specification for forged carbon steel piping components including bolts, nuts, studs and other fasteners to standard or custom dimensions, for use in ambient and higher temperature service in pressure systems.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A105 Flanges are disc-shaped parts, which are the most common in pipeline engineering. Flanges are used in pairs and matched with them on valves. In pipeline engineering, flanges are mainly used for pipeline connections. In the pipelines that need to be connected, flanges can be installed in a variety of ways. Wire connection flanges can be used for low-pressure pipelines, and welding flanges can be used for pressures above 4 kg. Add a washer between the two flanges, then tighten with the bolts.

sa350 lf2 flanges forging temperature is 900 ¨C 1200 ¡ãC. In order to avoid heavy scaling soak times should be kept to a minimum. The flanges range in size from ? inches to 48 inches. And the dimensions of the blind flange a350 lf2 flanges vary according to the standards, ASME B16.5, B16.48, BS4504, BS 10, EN-1092 and others.

Welding Neck Flanges are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting.

The long tapered hub provides an important reinforcement for use in several applications involving high pressure, sub-zero and / or elevated temperatures.

ASTM A105 is an iron-carbon alloy with carbon content of 0.0218%~2.11%. Also called carbon steel.

ASTM A694 carbon steel flanges are available in different grades, the most common being F52, F60 and F42.

The carbon steel seamless pipe fittings, buttwelded fitting and fabricated ones are available in the market.

The most common dimensional standard for 45 degree carbon steel is SME B16.9, B16.28 MSS-SP43/75 for sizes ranging from ?¡± to 72¡å (in all Schedules).

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

SA350 LF2 flanges are mostly used to connect pipes, valves and pumps. It has several grades and classes. These are corrosion resistance and are used in many other industrial sectors. They are made to specified dimensions, or to dimensional standards, such as the ASME and API specifications. The material composition includes carbon, silicon, manganese, phosphorus, sulfur, molybdenum, copper, chromium, nickel, vanadium and niobium.

The tee can be equal tee to connect three equally sized pipes or unequal tee to connect unequally sized pipes.Forgings or forming operations could be perfomred by hammering, pressing, piercing, upseting, rolling, extruding, bending, fusion welding, machining, or by a combination of two or more above operations. Which the point of manufacturing is not to produce injurious imperfections in the fittings.

As we know, ASTM A234 steel pipe fittings are used in pressure piping and in pressure vessel fabrication, for services at moderate and elevated temperatures. The fittings material in this standard consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added.

Just as the corrosion resistance characteristics of carbon steel could be improved by further processing, it is possible to increase the mechanical properties of the ASTM A105 Fittings with the use of heat treatments.

Carbon Steel ASTM A105 Flanges Made of carbon or mild steel material. Carbon, manganese, phosphorus, sulfur and iron may be included in the material composition.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

Carbon steel A105 bars are also used in offshore oil industry and seawater equipment. Carbon steel A105 round bars are commonly used in pumps, condensers and heat exchangers. These carbon steel A105 bars ensure the toughness to deliver the highest quality industry standard product. A105 is very popular in several industries for its enhanced potency and strength. Carbon steel a105 round bars have good machinability and are widely used for ideal finish, long lasting performance and corrosion resistance. The a105 square bar is widely used in many industries for manufacturing or final assembly. Our A105 bars are suitable for chemical, power and engineering industries. Designed with our engineering advantages, these A105 rods are widely used for ideal finish, ease of installation, long-lasting performance and corrosion resistance.