HT ASTM B366 WP20CB N08020 S 2 SCH10S 90 DEGREE SR ASME B16.9 Heat No. 87027

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

SA12 F11 Flange is made up of by using supreme raw material and they give excellent performance even in toughest environment. The weight chart of this is also available and based on this the product is manufactured.

Alloy steel flanges have corrosion oxidation stress corrosion cracking and crevice corrosion resistance.

ASTM 182 is use in pressure systems, Included are flanges, fittings and similar parts to specified dimensions or to dimensional standards, such as the ASME specifications. 182 F5 Cl2 Alloy Steel Flanges are well suited to not only high temperature but also high pressure or a combination of both these applications.

The low carbon content in A335’s alloy steel P9 square tube reduces carbide precipitation during welding to support corrosion-resistant properties in welded structures. Clad Steel P9 Rectangular Tubes are designed to prevent decomposition-erosion (joint mechanical and material spoilage) where scrubber mixers and gas condensate often contain chlorides.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P142

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

Users of SA182 Chrome Moly Gr.f9 forged bar do not rely solely on external coatings or finishes.

The specification for ASTM A320 Grade L7m materials covers alloy steel and stainless steel bolting materials for low temperature applications. ASTM A320 L7 Studs can also be used in applications with ambient temperatures up to -150oF. ASTM A320 grade L7m bolts and ASTM A320 bolts have a minimum Charpy impact value of 15 foot-pounds at this temperature.

These pipe fittings of B366 N06601 B366 N08825 B366 N10276 B366 N08020 materials, are used in the chemical industry, as well as in pressure vessels.

Alloy steel hollow bars offer excellent corrosion resistance and dimensional accuracy with tight tolerances.

The A335 p12 material composition includes carbon up to 0.05 ¨C 0.15, manganese up to 0.30 ¨C 0.61, sulfur and phosphorus up to 0.025, silicon up to 0.5, chromium 0.80-1.25 and molybdenum up to 0.44-0.65. This steel shall meet the specified chemical composition, tensile properties and hardness requirements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

Low alloy steels contain trace amounts of alloying agents such as niobium, nitrogen, vanadium, copper, nickel, chromium, titanium, calcium, molybdenum, rare earth elements or zirconium.

A194 2H Heavy Duty Hex bolts are designed for high strength, high temperature or high pressure applications and are usually available in a plain finish.

A182-F11 has high thermal strength (¦Äb¡Ý440MPa) and oxidation resistance at high temperature, and has certain resistance to hydrogen corrosion.

The A182 F9 Alloy Steel Blind Flanges are used to close a connection opposed to all other flanges which extend the pipeline. Alloy Steel ASTM A182 F9 Flanges is connected to the pipe by welding the pipe to the neck of the pipe flange. However, the inside diameter of ASTM A182 F9 Alloy Steel Flanges is being designed to match the inner diameter of the pipe.

Chromium-molybdenum alloy flanges connect pipes, valves, pumps and other equipment to form a piping system. They are ideal for applications that convey corrosive or high temperature fluids or gases.

It helps improve fatigue resistance. Many industries, including paper and pulp, chemical reprocessing, water pipelines, nuclear power plants, heat exchangers and others, use ASME sa182 f12 projects in a variety of applications. Our Premium Alloy Steel F12 Flanges are corrosion free, edge perfect, efficient, lightweight, frictionless work, easy to install, highly conductive and of great quality.

The alloy must be cooled for heat treatment prior to AISI AS F11 Hex Bar. All parameters of the heat treatment procedure are set by the specification, including the type of heat treatment, austenitization/solution temperature, and alloy steel F11 A182 bars.

Seamless steel tubes in ASTM A333, reheated and controlled at temperatures for hot working and hot finishing operations to finishing temperatures ranging from 845 to 945¡ãC [1550 to 1750¡ãF] and cooled in air or in air. Controlled atmosphere furnaces from initial temperature over 845¡ãC [1550¡ãF]. For ASTM A333 Grades 1, 6, and 10 Seamless Steel Pipe, heat treatment can be performed from a uniform temperature in excess of 815¡ãC [1500¡ãF], then quenched in liquid and reheated to the appropriate tempering temperature, this heat treatment ASTM A333 4.3.1 The above treatment scheme can also be replaced.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

In order to improve the thermal efficiency of the reheat steam pipeline of the power plant, the reheat temperature can be designed to be 621¡ãC, that is, the supercritical temperature. The United States first developed ASTM A335 P92 alloy steel in the late 1980s to meet the heat resistance requirements of this high temperature power plant. Alloy Steel P92 is an improved version of ASTM A335 P91 alloy with deliberate additions of tungsten, vanadium, niobium, reduced molybdenum content to fine-tune the ferrite/austenite ratio, and carefully controlled boron and nitrogen content.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P143

A/SA387 GR 9CLASS 2 Weldable carbon steel plate for high temperature pressure vessels and boilers. The material benefits from added chromium and molybdenum, which give the steel better corrosion and heat resistance. A/SA387 Grade 9 is intended for use by manufacturers serving the oil, gas and petrochemical industries.

ASTM A320 Grade L7M bolts and studs are also made from quenched and tempered alloy steel.

The corrosion resistance of SA 335 P91 seamless pipe is much higher than that of carbon steel. Grade P91 is a reference for the chemical composition of alloy steels. A chromium-molybdenum steel, the chemical composition of ASTM A335 P91 alloy steel pipe consists of 9% chromium and 1% molybdenum and vanadium.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

The material is made up of carbon, manganese, phosphorus, sulfur, silicon, chromium and molybdenum in the composition.

Please make sure to contact us for more information on the pipe fitting products such as the ASTM A860 MSS SP 75 WPHY 52 Pipe Fittings and their pricing.

ASTM A193 Grade B8M Grade 1 Fasteners are similar to Grade B8 but are made of AISI 316 stainless steel instead of AISI 304 stainless steel. Type 316 stainless steel has better corrosion resistance than type 304 stainless steel due to the addition of molybdenum.

One of the top stocks of ASTM A182 alloy steel F5 flanges for a variety of industrial applications. With a talented team of professionals, we are committed to supplying the highest quality ASTM A182 Alloy Steel F5 Flanges, widely used by customers in suitable applications.

These ASTM A182 Alloy Steel F12 Flanges are manufactured from high quality raw materials, so the manufactured products are of high quality. Additionally, these ASTM A182 Alloy Steel F12 Flanges are manufactured with the necessary standards, codes and guidelines in mind, resulting in a high quality product.

Shaped flanges made by die forging or precision (lost wax) casting, depending on the mechanical properties of the flange, die forged flanges have higher strength than cast flanges. Precision profiled flanges manufactured by forging or casting require a model (tool).

ASTM A194 2h nuts are available in nominal sizes ranging from ?” to 4″. These products are made with heavy duty hex nuts with different proof load stresses for regular nuts and zinc plated nuts. A194 2h coupling nut with 175ksi plain nut and 150ksi zinc plated nut. Fasteners of this grade of material also have high hardness.

Inconel600 is suitable for welding with the same material or other metals by any traditional welding process, such as tungsten electrode inert gas welding, plasma arc welding, manual sub-arc welding, metal inert gas shielded welding, molten arc inert gas shielded welding, and pulsed arc welding. Welding is the preferred solution. When using manual arc welding, it is recommended to use a shielding gas mixed with various components (Ar+He+H2+CO2).
Welding of Incoloy 825 must be carried out in the annealed condition and cleaned with a stainless steel wire brush to remove stains, dust and various markings. When welding the root of the weld, extreme care must be taken (Argon 99.99) to obtain the best quality of the root weld so that the weld does not produce oxides after the root has been welded. Color from the weld heat-affected zone should be removed with a stainless steel brush while the weld area is not cool.